Can I ask how I am to do self registration of com dll? I've been using SelfRegCost='0' on the file element
Even it's not advisable as seen below because it's quick and easy. http://www.symantec.com/connect/blogs/resons-avoiding-self-registration I remember trying to do it the proper way using "heat" but never got anywhere Please advise on a proper way of doing it with an example. Regards Brian _____________________________________________________________________ This e-mail was sent to you by EASYSCREEN LIMITED (EASYSCREEN). We are incorporated under the laws of England and Wales (company no. 05677531 and VAT registration no. 872810613). Our registered office is at 155 Bishopsgate, London EC2M 3TQ. This e-mail and/or any attached documents may contain privileged and confidential information and should only be read by those persons to whom this e-mail is addressed. Use by other than intended recipients is prohibited. If you are not the addressee, you must not copy, distribute, disclose or use any of the information in it. If you have received it in error, please delete it and immediately notify the sender. EASYSCREEN reserves the right to monitor all e-mail messages passing through its network. As we cannot guarantee the genuineness, accuracy or completeness of the information contained in this message, the statements set forth are not legally binding. ------------------------------------------------------------------------------ Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! Tap into the largest installed PC base & get more eyes on your game by optimizing for Intel(R) Graphics Technology. Get started today with the Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. http://p.sf.net/sfu/intelisp-dev2dev _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
