Yeah, makes sense. Bummer. David Bartmess wrote: > I have put conditions on the feature, but the problem is that the deciding > variable is taken from input from a custom action that checks entitlements > for each feature. This has to be done after the user enters a valid URL to > login to (and possibly a username/password if the first attempt fails). > > This means that the variables that set features to be removed aren't set > until the UI sequence, way after the CostFinalize phase, which is where I > read that the feature set is composed. If I could reset the feature set > during the UI, that would be what I need... > > > -----Original Message----- > From: Rob Mensching [mailto:r...@wixtoolset.org] > Sent: Thursday, May 14, 2009 1:36 PM > To: General discussion for Windows Installer XML toolset. > Subject: Re: [WiX-users] Trying to remove features from list of features that > can be installed > > Not sure, but it sounds like you want to Condition the Feature. > > David Bartmess wrote: > >> I found that the Publish event AddLocal and Remove can set the feature to >> install or not to install, but it doesn't completely remove the feature from >> the list of features. >> > > ------------------------------------------------------------------------------ > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 > Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > WiX-users mailing list > WiX-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wix-users >
------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
