Don,
I can't answer your first question but the answer to your second
question (What if you don't want your assembly added to the GAC?) is you
need to use the attribute AssemblyApplication to have it installed
outside the GAC.
Thanks,
Tom
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Don
Tasanasanta (Volt)
Sent: Thursday, February 07, 2008 4:34 PM
To: wix-users@lists.sourceforge.net
Subject: [WiX-users] Assembly=".net" attribute in the <File> tag
What exactly does the Assembly=".net" attribute in the <File> tag do?
WiX help says:
Specifies if this File is a Win32 Assembly or .NET Assembly that needs
to be installed into the Global Assembly Cache. If the value is '.net'
or 'win32', this file must also be the key path of the Component. This
attribute's value should be one of the following: .net , no , win32
Does this mean that if you mark an assembly as ".net" that install will
try and add that assembly to the GAC? What if you don't want your
assembly added to the GAC?
What is the default value for this attribute?
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
WiX-users mailing list
WiX-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wix-users
