Nice, I’m glad the information was helpful to you.
Personally, I prefer the syslog message for my marker because I find it useful
to be able to tailor the message for each specific test, as in “CM: About to
test ABC feature …” or “CM: Rx’d response to ABC request; now testing XYZ …”,
etc., whereas with ping, you just get the same, generic payload for every ICMP
echo request packet. I find the syslog messages to be more unique and stick
out more in a capture file too, whereas ICMP is more common to see, so
filtering for “icmp” could also filter traffic unrelated to your markers, but I
almost never see syslog traffic in my traces.
But whatever works for you; that’s the important thing. If you are going to
use ICMP packets as your markers though, then you might want to consider using
a non-standard payload size, or making use of the “-p pattern” or possibly
other options, as that will help your marker packtes stand out from other ICMP
echo request/reply packets that might be in your trace.
- Chris
From: Wireshark-users <wireshark-users-boun...@wireshark.org> On Behalf Of Bob
Gustafson
Sent: Friday, May 8, 2020 2:23 PM
To: wireshark-users@wireshark.org
Subject: Re: [Wireshark-users] Newbee - propose Splat Button
I went ahead with the Lua splat button and I have it working (!!)
I used the 2nd batch of code shown below with the following changes:
-- Choose a command; here are a couple of examples:
--local cmd = "echo " .. win:get_text() .. "| nc -w 1 -u 1.1.1.1 514"
local cmd = "ping -c 1 192.168.50.56"
The documentation wasn't totally clear on whether a file 'init.lua' should be
used or where it should go.
I finally figured out that my splat.lua file could go into
~/.local/lib/wireshark/plugins/splat.lua
Wireshark then needs to be restarted and I can find a command 'Marker' in the
Tools menu at the top of the Wireshark window.
The 'ping' command results in two lines - the request and the reply.
The 'nc' command worked too - only one line in wireshark output, but also a
'Port unreachable' line following.
Thanks much for the chance to fool around a bit. Stay safe.
BobG
On 5/7/20 12:57 PM, Bob Gustafson wrote:
Super - thanks much. With code too!
Now, should I play with this new button Tool, or debug my coreos boot script...
Best regards - BobG
On 5/7/20 12:38 PM, Maynard, Chris via Wireshark-users wrote:
It seems like the desired functionality is to inject a "marker" packet into the
capture? If so, you could use an external program, something like ping or nc,
to do that. I tend to use a separate script for this, something such as:
#!/bin/sh
if (( ${#} < 1 ))
then
echo "Usage: $0 <message> [host]"
exit 0
fi
if (( ${#} < 2 ))
then
# Send a syslog message $1 to host 1.1.1.1
echo "${1}" | nc -w 1 -u 1.1.1.1 514
else
# Send a syslog message $1 to the host $2
echo "${1}" | nc -w 1 -u ${2} 514
fi
ping
However, if you want something like this integrated with Wireshark, then it is
possible with Lua. Here’s a sample “proof-of-concept” Lua script that will
send a packet whenever you click the send button. I successfully tested this
on Windows (with Cygwin tools installed for nc) , but I did need to run
Wiresahrk as an administrator for this to work. I’ve illustrated two commands,
ping and nc, but you can tailor it however you wish. Here’s the contents of
the marker.lua file that you can experiment with:
if not gui_enabled() then
return
end
local count = 1
local function marker_window()
local win = TextWindow.new("Marker");
win:set("Marker " .. count)
win:add_button("Send", function()
-- Choose a command; here are a couple of examples:
local cmd = "echo " .. win:get_text() .. "| nc -w 1 -u 1.1.1.1 514"
--local cmd = "ping -n 1 -l 100 1.1.1.1"
os.execute (cmd)
count = count + 1
win:set("Marker " .. count)
end)
end
register_menu("Marker", marker_window, MENU_TOOLS_UNSORTED)
You can call it splat.lua and rename “Marker” to “Splat” if you prefer that.
The file should be stored in your Wireshark plugins directory. If Wireshark is
running, you’ll need to restart it. Refer to
https://wiki.wireshark.org/Lua/Examples#dialogs_and_TextWindows for more
information or to the Lua section of the Wireshark Developer’s Guide:
https://www.wireshark.org/docs/wsdg_html_chunked/wslua_menu_example.html.
Hope it helps.
- Chris
-----Original Message-----
From: Wireshark-users
<wireshark-users-boun...@wireshark.org><mailto:wireshark-users-boun...@wireshark.org>
On Behalf Of Bob Gustafson
Sent: Thursday, May 7, 2020 12:48 PM
To: wireshark-users@wireshark.org<mailto:wireshark-users@wireshark.org>; Jaap
Keuter <jaap.keu...@xs4all.nl><mailto:jaap.keu...@xs4all.nl>
Subject: Re: [Wireshark-users] Newbee - propose Splat Button
Thanks Jaap.
I am on the Fedora31. When I hit Edit->Mark Packet, nothing happens - no
mark... Ahh, when I move cursor off packet to be marked, I see marked packet as
white on black rather than white on blue.
The functionality I'm looking for is to actually store the user button
(splat) in the saved file. But maybe I don't need that if I just keep Wireshark
open on my screen. Also, other users may use the saved file for other purposes
- parse and act. Having a splat actually in the saved file might not be so
good. But then, those folks probably would not be looking at the screen anyway.
I will do my experiments again (and again) and use the Mark feature. It may be
good enough.
Thanks much - BobG
On 5/7/20 11:08 AM, Jaap Keuter wrote:
> Hi Bob,
>
> Good to hear the program is helpful for your quest.
>
> As for your purpose, does the ‘Mark Packet’ feature do the trick? Select a
> packet from the list, hit ⌘M (on macOS) / probably Ctrl+M (on others). You
> can also find the option in the Edit menu. Unfortunately these marks are not
> (yet) saved to the capture file, but remain as long as the capture is loaded.
>
> Hope it helps,
> Jaap
>
>
>> On 7 May 2020, at 17:43, Bob Gustafson
>> <bob...@rcn.com<mailto:bob...@rcn.com>> wrote:
>>
>> Hi list
>>
>> I'm in the process of working through the initial boot of a new box, a new
>> os (coreos), and a new (to me) iPXE.
>>
>> It is a trial and error process for me - my coding is a bit sloppy and I
>> don't read all of the instructions the first time around.
>>
>> Wireshark has been very helpful as the boot process is between the new box
>> and a host (Fedora31) I can see all of the successes and failures that hit
>> the net.
>>
>> -----
>>
>> To increase my visibility, rather than using a boot script, I am keying in
>> the boot steps by hand (kernel, initrd, ...) and then observing the results
>> on my minicom screen and on wireshark.
>>
>> This is a long process (given my errors..).
>>
>> I can copy the lines on my minicom screen and copy the lines from wireshark
>> for subsequent inspection with a cup of coffee.
>>
>> It would really be nice if I could mouse over to the Wireshark window during
>> my actions and click on a special BUTTON, which would enter a blank (or
>> default or TBD text) into a new line on the Wireshark packet transcript
>> window. The SPLAT.
>>
>> Then, when I look at the minicom save, and the wireshark save, I can see
>> roughly what I did at various places in time without having to ponder the
>> Time column in wireshark.
>>
>> Thanks for your attention, keep safe, wash hands
>>
>> Bob Gustafson
>>
CONFIDENTIALITY NOTICE: This message is the property of International Game
Technology PLC and/or its subsidiaries and may contain proprietary,
confidential or trade secret information. This message is intended solely for
the use of the addressee. If you are not the intended recipient and have
received this message in error, please delete this message from your system.
Any unauthorized reading, distribution, copying, or other use of this message
or its attachments is strictly prohibited.
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@wireshark.org>
Archives: https://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-requ...@wireshark.org?subject=unsubscribe
