Wireshark 3.0.3 on MacOS 10.14.6 I am trying to capture traffic to and from a local device (a Wi-Fi power plug). If I connect the plug (via Wi-Fi) to a shared Internet connection on my Mac, I see local lan exchanges as well as packets sent from the plug to a remote server. The packets to the remote server are all TLS.
However, when I have the plug connected to the local network via Wi-Fi (I.e. not through my Mac) and I capture packets on en0 (the wired interface) I cannot see the packets going off lan. It is as though the interface is not in promiscuous mode. Note: on the local lan, 192.168.5.0/24, all segments, Wi-Fi and wired) are bridged. So, I would expect to see all traffic to/from the plug on en0. Obviously, I am doing something wrong. But, for the life of me I can't figure out what. Any/all ideas and suggestions most appreciated. Richard ___________________________________________________________________________ Sent via: Wireshark-users mailing list <wireshark-users@wireshark.org> Archives: https://www.wireshark.org/lists/wireshark-users Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users mailto:wireshark-users-requ...@wireshark.org?subject=unsubscribe
