our MATE can do that... On Thu, Mar 13, 2008 at 7:12 PM, Martin Mathieson <[EMAIL PROTECTED]> wrote: > I once saw an impressive demo of the Hammer Call Analyzer. > > It let you configure rules to describe how the gateway would be translating > between numbers and URIs. > It could then associate both call legs of the call and show them in a single > ladder diagram. > > Martin > > > > On Thu, Mar 13, 2008 at 5:35 PM, Jaap Keuter <[EMAIL PROTECTED]> wrote: > > Hi, > > > > Called party number usually translates into the INVITE URI. The number > plan > > and type are not converted, maybe only used to verify that a URI can be > > composed of the called party number information, or, if it's an advanced > > gateway, could select the URI format based on the plan and type, but I've > > never seen that. > > > > Thanx, > > Jaap > > > > > > > > > > mixalis x. wrote: > > > Hello all, > > > > > > I have an H323->SIP gateway and i'm trying to figure out how it maps the > > > "Called Party/Number plan/Number type" information element, found in the > > > original Q.931 setup message, to the SIP Invite message. I have the > > > traces from both the Q931 setup packet (where i can see the number > > > plan/number type) and the SIP Invite packet, but i cannot locate this > > > specific information inside the SIP message. > > > > > > Any ideas? > > > > > > tia > > > Michalis > > > > > > > _______________________________________________ > > Wireshark-users mailing list > > Wireshark-users@wireshark.org > > http://www.wireshark.org/mailman/listinfo/wireshark-users > > > > > _______________________________________________ > Wireshark-users mailing list > Wireshark-users@wireshark.org > http://www.wireshark.org/mailman/listinfo/wireshark-users > >
-- This information is top security. When you have read it, destroy yourself. -- Marshall McLuhan _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
