Try turning promiscuous mode off. Newer Intel chipset drivers do not capture anything with promiscuous mode on, but do work with it off.
At 08:04 AM 11/20/2007, Gianluca Varenni wrote: >It's entirely possible that the newer drivers from Linksys do not support >promiscuous mode any more (promiscuous mode is a feature of the miniport >driver for the network card, it's not an OS feature). > >Does it fail to go into promiscuous mode or you simply don't capture any >packet? > >GV > > >----- Original Message ----- >From: "John Bayly" <[EMAIL PROTECTED]> >To: <wireshark-users@wireshark.org> >Sent: Tuesday, November 20, 2007 6:28 AM >Subject: [Wireshark-users] Linksys WPC 54g promiscuous capture on XP-sp2 > > > > I'd been using Ethereal on my laptop using XP Pro-sp2 > > and a Linksys WPC54g v.1 (and a v.1.2 card) for quite > > some time. I never had any issues about capturing in > > promiscuous mode. > > I hadn't used for a while, and then found the > > Wireshark had superseded Ethereal, so I downloaded > > WinPCAP 4.02 and Wireshark. > > However, I now cannot capture in promiscuous mode. > > > > I'm using XP Pro-sp2 and I've tried every combination > > using the following: > > WPC54g v.1 > > WPC54g v.1.2 > > Card driver v.3.3 > > Card driver v.3.6 > > Card driver v.4.1 > > WinPCAP v.3.1 > > WinPCAP v.4.0.2 > > > > I've also tried using tshark.exe and windump.exe to > > capture, to no avail. > > > > Does anyone have an idea what might be causing this, > > especially as I used to have no problems. > > > > I'm wondering if MS have broken promiscuous capture as > > the configuration that used to work on another Laptop > > in our office appears to have stopped working too. > > > > Thanks in advance, > > John _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
