Hello, I am trying to implement reassembly for FTDI MPSSE protocol. The desegment API sounds like an excellent choice, because there can be more serial protocols implemented in the future that share similar characteristics to MPSSE (i.e. are designed around asynchronous character transmission).
Each time FTDI FT passes the payload to MPSSE dissector, MPSSE can: * dissect the data just fine if it received (one or more) complete function code with parameters, * dissect as much as it can (complete function code with parameters) and request X additional bytes The value X in some cases is known from the beginning, but in some cases it is only an estimate. It is only an estimate if the missing data includes the variable data length parameter (i.e. MPSSE dissector knows that it is a data shifting command, but does not know how many bytes the command will send out, because the length is in the next frame). I am not sure if the approach I am pursuing is good or bad. The work in progress I have produced so far is at [1]. I am stuck at the point where, I need to either: * pass the "partially reassembled" tvb to MPSSE to check if it is complete, or * mark the data as reassembled as soon as I receive X additional bytes, but then after passing such reassembled data to MPSSE, it should be possible to "unmark" in case it needs even more bytes (in case the original estimate changes based on the new information). Is either of the above viable? Are there any better approaches to the problem? [1] https://code.wireshark.org/review/37709 Best Regards, Tomasz Moń ___________________________________________________________________________ Sent via: Wireshark-dev mailing list <wireshark-dev@wireshark.org> Archives: https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe
