I did the following:
* Deleted the QT5.5.1 directory
* Installed Qt5.6.1
* Deleted my wsbuild64 directory content
* Ran the cmake build prep step
* Opened the Wireshark.sln in VS 2013
* Set Wireshark as the Startup Project
* Ran a Build for Debug x64
* Clicked on Local Windows Debugger to start Wireshark
* Wireshark started successfully
* Checked the Run\Debug directory and the QT5 DLLs are all in there
Thanks for the help.
Best regards...Paul
From: Paul Offord
Sent: 27 December 2016 14:12
To: Developer support list for Wireshark <wireshark-dev@wireshark.org>
Subject: Re: [Wireshark-dev] QT DLLs missing from build environment
Hi Anders,
I plan to upgrade Qt but I thought I'd try a build with releases I've used
before. I notice that the Qt site is offering 5.7 - is that a supported
release?
Thanks...Paul
Sent from Samsung Mobile on O2
-------- Original message --------
From: Anders Broman
Date:27/12/2016 14:04 (GMT+00:00)
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] QT DLLs missing from build environment
Hi,
At some point I think there was a fault in Qt causing it to not copy all .dll
when running the command to do so. I'm currently building with Qt 5.6 which I
believe is supposed
To be LTS.
Regards
Anders
From:
wireshark-dev-boun...@wireshark.org<mailto:wireshark-dev-boun...@wireshark.org>
[mailto:wireshark-dev-boun...@wireshark.org] On Behalf Of Paul Offord
Sent: den 27 december 2016 14:05
To: Developer support list for Wireshark
<wireshark-dev@wireshark.org<mailto:wireshark-dev@wireshark.org>>
Subject: [Wireshark-dev] QT DLLs missing from build environment
I'm building the latest Wireshark source on Windows 7 with QT5.5.1 and VS 2013.
As you may have seen from earlier posts, I scratched my old build environment
and I'm creating a new one. The build prep and build (Debug) complete
successfully, but when I try to start Wireshark I get a message saying
Qt5PrintSupportd.dll can't be found.
I remember this from when I created the environment last time around, and I
fixed it by copying the DLLs required into the Wireshark run directory. I
guess this isn't the way I should be doing it. What's the correct procedure
here?
Thanks and regards...Paul
______________________________________________________________________
This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and delete
this e-mail from your system.
Any views or opinions expressed are solely those of the author and do not
necessarily represent those of Advance Seven Ltd. E-mail transmission cannot be
guaranteed to be secure or error-free as information could be intercepted,
corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The
sender therefore does not accept liability for any errors or omissions in the
contents of this message, which arise as a result of e-mail transmission.
Advance Seven Ltd. Registered in England & Wales numbered 2373877 at Endeavour
House, Coopers End Lane, Stansted, Essex CM24 1SJ
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
______________________________________________________________________
This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and delete
this e-mail from your system.
Any views or opinions expressed are solely those of the author and do not
necessarily represent those of Advance Seven Ltd. E-mail transmission cannot be
guaranteed to be secure or error-free as information could be intercepted,
corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The
sender therefore does not accept liability for any errors or omissions in the
contents of this message, which arise as a result of e-mail transmission.
Advance Seven Ltd. Registered in England & Wales numbered 2373877 at Endeavour
House, Coopers End Lane, Stansted, Essex CM24 1SJ
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
___________________________________________________________________________
Sent via: Wireshark-dev mailing list <wireshark-dev@wireshark.org>
Archives: https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe
