Hi, Checked in.
Thanx, Jaap On Wed, 2 May 2007, Matt Addison wrote: > Problem: > The existing sll dissector does not handle ppp_hdlc packets (sll.ltype > == 0x0007). > > Resolution: > Alter packet-sll.c to call the ppp_hdlc dissector when a packet with > sll.ltype=0x0007 is received. > > Why: > Bringing up a T1 sniffer using a Digium Wildcat TE205P, stock wireshark > would not recognize the packets as they are delivered as ppp_hdlc in > sll, this is/has not been an issue for people using these cards to > terminate ppp in the machine as they can sniff the pppX interface, but > in a passive monitoring mode like I am trying to set up there is no pppX > interface- only an hdlcX interface from the zaptel drivers. > > Hardware: > Digium Wildcat TE205P, T1 spans in nethdlc mode in zaptel.conf, set to > ppp mode using sethdlc then hdlcX interfaces manually brought up with > ifconfig. > > > > Patch developed against SVN revision 21635 and applies/compiles clean on > both Linux (against the 0.99.4 sources used in Debian Etch) and Windows > (VC2005). > I'm not subscribed to the -dev list so if you could unicast > questions/comments to me as well as well as the list that'd be great. > > ~Matt > _______________________________________________ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev
