(...)
Found stability and no warnings/errors to report on usb nics:
RTL8821AU 11ac @aarch64
RTL8811AU 11ac @amd64
Cheers!
Nuno Teixeira <edua...@freebsd.org> escreveu (sábado, 26/04/2025 à(s) 08:58):
>
> Hello!
>
> > Ok, that is interesting. We're not keeping counters in m_get2() for when
> > the buffer requested is too large; it only returns NULL.
> > I guess it's bailing if it's above a page size (4kbytes.)
> >
> > Try changing the m_get2() call there to m_get3(); let's see if that
> > improves things.
> > (m_get3() will fail above 16kbytes; and if it can't allocate a buffer <
> > 16kbytes then we should get some UMA error counted somehwere.)
>
> iperf3 -R is happy, and git pull --rebase completed OK and fast:
>
> Connecting to host hp, port 5201
> Reverse mode, remote host hp is sending
> [ 5] local 192.168.1.82 port 39601 connected to 192.168.1.100 port 5201
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-1.06 sec 6.00 MBytes 47.4 Mbits/sec
> [ 5] 1.06-2.06 sec 15.9 MBytes 134 Mbits/sec
> [ 5] 2.06-3.06 sec 16.1 MBytes 135 Mbits/sec
> [ 5] 3.06-4.06 sec 16.4 MBytes 137 Mbits/sec
> [ 5] 4.06-5.00 sec 15.0 MBytes 134 Mbits/sec
> [ 5] 5.00-6.06 sec 16.4 MBytes 129 Mbits/sec
> [ 5] 6.06-7.06 sec 15.2 MBytes 128 Mbits/sec
> [ 5] 7.06-8.06 sec 14.8 MBytes 124 Mbits/sec
> [ 5] 8.06-9.06 sec 15.8 MBytes 132 Mbits/sec
> [ 5] 9.06-10.06 sec 16.1 MBytes 135 Mbits/sec
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bitrate Retr
> [ 5] 0.00-10.08 sec 148 MBytes 123 Mbits/sec 0 sender
> [ 5] 0.00-10.06 sec 148 MBytes 123 Mbits/sec receiver
>
> iperf Done.
>
> I will use this dongle on amd64 for further testing, I will patch aarch64
> soon.
>
> ```
> diff --git a/sys/dev/rtwn/usb/rtwn_usb_rx.c b/sys/dev/rtwn/usb/rtwn_usb_rx.c
> index 657d6bdeb9e4..54869fe336bd 100644
> --- a/sys/dev/rtwn/usb/rtwn_usb_rx.c
> +++ b/sys/dev/rtwn/usb/rtwn_usb_rx.c
> @@ -124,10 +124,10 @@ rtwn_rx_copy_to_mbuf(struct rtwn_softc *sc,
> struct rtwn_rx_stat_common *stat,
> if (rtwn_rx_check_pre_alloc(sc, stat) != 0)
> goto fail;
>
> - m = m_get2(totlen, M_NOWAIT, MT_DATA, M_PKTHDR);
> + m = m_get3(totlen, M_NOWAIT, MT_DATA, M_PKTHDR);
> if (__predict_false(m == NULL)) {
> - device_printf(sc->sc_dev, "%s: could not allocate RX mbuf\n",
> - __func__);
> + device_printf(sc->sc_dev, "%s: could not allocate RX
> mbuf (%d bytes)\n",
> + __func__, totlen);
> goto fail;
> }
> ```
>
> Thanks!
>
>
> --
> Nuno Teixeira
> FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org
--
Nuno Teixeira
FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org
