Nuno Teixeira <edua...@freebsd.org> escreveu (terça, 1/04/2025 à(s) 13:07):
> Hello all, > > For what I'm reading I will need to keep wifi-firmware-iwlwifi-kmod-22000 > port and config rc.conf: > > - wlans_iwlwifi0="wlan0" > + wlans_iwx0="wlan0" > > Do I need any more configs besides this? > On main from today, no attach to iwx driver: - wlans_iwx0="wlan0" - iwx doesn't show at dmesg at all - if_iwx.ko shows at kldstat --- Intel(R) Wireless WiFi based driver for FreeBSD pchtherm0: <CometLake-H Thermal Subsystem> mem 0xb44a5000-0xb44a5fff at device 18.0 on pci0 iwlwifi0: <iwlwifi> mem 0xb4498000-0xb449bfff at device 20.3 on pci0 iwlwifi0: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000 iwlwifi0: PCI dev 06f0/0074, rev=0x351, rfid=0x10a100 iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz iwlwifi0: successfully loaded firmware image 'iwlwifi-QuZ-a0-hr-b0-77.ucode' iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37 iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either iwl-debug-yoyo_bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo_bin either iwl_debug_yoyo_bin: could not load binary firmware /boot/firmware/iwl_debug_yoyo_bin either iwlwifi0: loaded firmware version 77.2df8986f.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm iwlwifi0: Detected RF HR B3, rfid=0x10a100 iwlwifi0: base HW address: 6c:6a:77:df:09:21 --- Is this related to: "To avoid breaking deployed WiFi configurations iwx probes with a lower priority than iwlwifi. This can be changed by blocking iwlwifi with devmatch." ? For sure that I'm missing some config. Thanks, -- Nuno Teixeira FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org
