I discovered this during testing freebsd 14.1.
System description:
slimline is an HP Slimline Desktop - 290-p0014
Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz
Coffee Lake (Core i7)
Ethernet RTL8111/8168/8411 and RTL8125 2.5GbE
Wi-Fi RTL8821CE
In an effort to reproduce, I pulled /usr/src and /usr/ports using git.
I started a buildworld and ssh'ed in and tail -f /var/log/Phase1.log.
After a short while, system is frozen to ssh, and can't use console
either. The latest changes were to network code, so I'll reboot and
build and install world and kernel before I continue testing...
Here's my ifconfig before the lockup:
re0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP>
metric 0 mtu 1500
options=60251b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,LRO,WOL_MAGIC,RXCSUM_IPV6,TXCSUM_IPV6>
ether ??:??:??:??:??:??
inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP>
metric 0 mtu 1500
options=60251b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,LRO,WOL_MAGIC,RXCSUM_IPV6,TXCSUM_IPV6>
ether ??:??:??:??:??:??
inet 192.168.1.55 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (2500Base-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu
16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=0
ether ??:??:??:??:??:??
inet 192.168.1.72 netmask 0xffffff00 broadcast 192.168.1.255
groups: wlan
ssid channel 11 (2462 MHz 11g) bssid ??:??:??:??:??:??
regdomain FCC country US authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 7 scanvalid 60
protmode CTS wme roaming MANUAL
parent interface: rtw880
media: IEEE 802.11 Wireless Ethernet OFDM/48Mbps mode 11g
status: associated
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
On 6/12/24 10:44, Bjoern A. Zeeb wrote:
On Wed, 12 Jun 2024, Steven Friedrich wrote:
I'm running 14.1-RELEASE, with q2 ports.
If I configure rtw88 and wlan in /etc/rc.conf, networking locks up
after a short while.
In what way? What's the state of wireless? Do you have logs?
Do you have a parallel ethernet? Is that working? Do you use lagg in
that case?
Where might I find current status of this driver? Open bug reports?
Open (and closed) bug reports categorized for rtw88/rtw89 are here:
https://bugs.freebsd.org/bugzilla/showdependencytree.cgi?id=273621&hide_resolved=0
