hello - i've successfully run the "apply-wireless.sh" script and booted
into a rebuilt kernel. the system has an intel 9560 device which i
usually used with if_iwm.
i am able to successfully unload if_iwm and load if_iwlwifi.ko. after
updating my rc.conf to use the iwlwifi0 device and running "service
netif start" i see the following output in my dmesg buffer:
lan0: Ethernet address: d8:3b:bf:82:d4:4e
lo0: link state changed to UP
iwlwifi0: lkpi_ic_getradiocaps: Adding chan 1/2412/0/0/0 returned error 55
iwlwifi0: lkpi_ic_getradiocaps: Adding chan 36/5180/0/0/0 returned error 55
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0
len 0
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0
len 0
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0
len 0
wlan0: _ieee80211_crypto_delkey: NONE keyix 65535 flags 0x3 rsc 0 tsc 0
len 0
wlan0: start running, 0 vaps running
wlan0: ieee80211_start_locked: up parent iwlwifi0
wlan0: start running, 1 vaps running
wlan0: ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0)
wlan0: ieee80211_newstate_cb: INIT -> SCAN arg 0
wlan0: sta_newstate: INIT -> SCAN (0)
the NIC isn't able to associate with any SSID's and /var/log/messages
contains:
Sep 9 20:52:15 colony wpa_supplicant[76640]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Sep 9 20:52:15 colony wpa_supplicant[76640]: wlan0:
CTRL-EVENT-SCAN-FAILED ret=-1 retry=1
i haven't had a chance to dig into what "error 55" is but posting here
to see if this is a known issue. here is my systems dmesg after i
unload if_iwm and load if_iwlwifi:
https://termbin.com/v23g
this dmesg is from after me running "service netif start"
https://termbin.com/bpkk
and finally here's a termbin of /var/log/messages.
https://termbin.com/99n1
happy to test any patches or run additional debug steps, i've got this
system setup as a zfs bootenv.
-pete
--
Pete Wright
p...@nomadlogic.org
@nomadlogicLA
