Hello David
and thanks for your answer. I guess it is something like this. Unfortunately all updates of the modem driver leave my modem inoperative and I am stuck with the current one. At least I have an idea what is going on. Thanks for your help.
Regards,
Frank
From: "David Barnish" <[EMAIL PROTECTED]> Reply-To: [email protected] To: <[email protected]> Subject: RE: [WinPcap-users] Can only see incoming packets Date: Wed, 9 Feb 2005 08:13:03 -0600
I have seen this same behavior when sniffing packets on a VPN connection. What we found was that the VPN client driver (which sits below the WinPCap driver) had a bug where it didn't support the hardware filter NDIS_PACKET_TYPE_ALL_LOCAL. It was not looping back the outgoing packets back up the NDIS stack to the WinPCap driver, so we never saw them. You might try using a different PPP client to see if it will work. You might also get the latest drivers for your PPP client to see if it was an issue and was fixed. Finally, you might want to ask the support folks for your PPP client if they are aware of any issues related to loopback traffic and their driver. In any case, I suspect that the problem is not in WinPcap, but another driver that is being used.
Thank you, David Barnish
"God does not play dice!" -- Albert Einstein
"Not only does God play dice with the Universe - he sometimes casts them where they can't be seen."
-- Stephen Hawking
-----Original Message----- From: G. Menge [mailto:[EMAIL PROTECTED] Sent: Monday, February 07, 2005 4:14 AM To: [email protected] Subject: [WinPcap-users] Can only see incoming packets
Hello,
I use WinXP Home Edition SP2 and wanted to trace some network problems
with Ethereal 0.10.9. I installed WinPCap V3.1 beta4 and I captured all
traffic on the PPP interface of my dial-up connection. However, I only saw
the packets that were incoming and could not see any packets going out of my
computer. There was no filter in effect.
Can anybody help me with this?
Regards,
Frank
================================================================== This is the WinPcap users list. It is archived at http://www.mail-archive.com/[email protected]/
To unsubscribe use mailto: [EMAIL PROTECTED] ==================================================================
================================================================= This is the WinPcap users list. It is archived at
http://www.mail-archive.com/[email protected]/
To unsubscribe use mailto: [EMAIL PROTECTED] =================================================================
================================================================== This is the WinPcap users list. It is archived at http://www.mail-archive.com/[email protected]/
To unsubscribe use mailto: [EMAIL PROTECTED]
==================================================================
