some net cards do allow for the MAC address to be set by the user, but generally the NIC has a unique address harwired in the chips. if all you want is to send packets with a different MAC address then you must parse the ethernet packet, replace the mac and send it back
----- Original Message ----- From: "Grzegorz Niemirowski" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 11, 2002 12:50 PM Subject: Re: [WinPcap-users] How to change the Mac address of my network adapter. > ---- Original Message ---- > From: "Murugappan Viswanath" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, September 11, 2002 9:46 AM > Subject: RE: [WinPcap-users] How to change the Mac address of my network > adapter. > > > U cannot change the MAC Address of any Adapter.Its universally unique > > It is possible with some kind of network cards. arp command changes arp > temporarily. > > > > ================================================================== > This is the WinPcap users list. It is archived at > http://www.mail-archive.com/[email protected]/ > > To unsubscribe use > mailto: [EMAIL PROTECTED]?body=unsubscribe > ================================================================== ================================================================== This is the WinPcap users list. It is archived at http://www.mail-archive.com/[email protected]/ To unsubscribe use mailto: [EMAIL PROTECTED]?body=unsubscribe ==================================================================
