What program are you using to capture the packets? It's possible that you
set it to capture only a portion of every packet (for example, windump by
default captures only the first 96 bytes of the packets). In every case,
JpCap uses winpcap to capture, so the fact that it works correctly means
that the problem is in the application and not in winpcap.
Loris
----- Original Message -----
From: "Randall Jameson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 07, 2002 5:35 PM
Subject: [WinPcap-users] Missing packets
Hello,
I'm testing my packet capture by going into windows exporer and clicking
on a text file that is on another computer. I'm capturing packets for the
ethernet adapter that connects the two pcs. If the file is a short file
then none of the text ever shows up in the packets. If it is a long file
then some of the text shows up. Got any pointers for me?
I get a lot of packets that look like this:
��SMB%
which I expected.
With the JpCap from Keita Fujii I was able to see all the packets.
--
regards,
Randall Jameson
2391 CR 457
Coleman, Texas 76834 USA http://www.colemantx.org
170 miles West of Austin, 50 miles South of Abilene
(915) 625-4000
http://www.io.com/~rjameson
