Well thank for the insight but I will still leave ubuntu updates off. I 
have clearly seen a few other posts with the same issue after updating to 
Ubuntu with not much of a fix. Considering this computer doesn't run 
anything vital to me I also don't care if it updates.

On Thursday, March 12, 2026 at 7:43:51 PM UTC-4 John Smith wrote:

> To be honest I have no idea why my copy of 24.04.3 LTS failed. It was in 
>> the middle of installing when I had a message window popup stating that the 
>> installed failed.
>
>
> That could have been a corrupt image or the USB/CD/DVD that wasn't written 
> to or couldn't be read from properly, but when you said that version broke 
> the driver I thought you meant it installed fully.
>  
>
>> I think when I get back home tonight I will disable updates just in case.
>
>
> That isn't a good strategy when there is bugs that get a high CVE score, 
> especially if the severity is up around 10.
>
> Setting hold on packages is less risky as only those packages won't update.
>
> On Fri, 13 Mar 2026 at 05:10, Mike Book <[email protected]> wrote:
>
>> To be honest I have no idea why my copy of 24.04.3 LTS failed. It was in 
>> the middle of installing when I had a message window popup stating that the 
>> installed failed. Asked me to send the report but I passed on it. So I 
>> don't believe it was a kernel issue. 
>>
>> Since I found my old previous installation media I knew that worked 
>> previously so just went with that. 
>>
>> Like stated I'm running desktop. Any time there is an update I get a 
>> window saying a update is available and I just pass on it. I think when I 
>> get back home tonight I will disable updates just in case.
>>
>> On Thursday, March 12, 2026 at 3:48:33 AM UTC-4 John Smith wrote:
>>
>>> I couldn't find an ISO of 24.04.3 LTS that would work when installing
>>>
>>>
>>> Was it just a kernel issue?
>>>
>>> If so wouldn't you just install an older kernel package and then use 
>>> apt-mark hold to stop it from being upgraded? 
>>>
>>> On Thu, 12 Mar 2026 at 15:20, Mike Book <[email protected]> wrote:
>>>
>>>> Thank you to everyone that assisted.
>>>>
>>>> My weather station is officially back up and running.
>>>>
>>>> Here is the fix just for those in the future that might be having the 
>>>> same problem.
>>>>
>>>> For starters Ubuntu 24.04.4 LTS kills the Acurite driver. It appears 
>>>> 25.10 does the same thing.
>>>>
>>>> I couldn't find an ISO of 24.04.3 LTS that would work when installing. 
>>>> I only guessed this would work from looking around on the forums. There is 
>>>> a live server version of 24.04.3 that might work but I haven't verified 
>>>> that. I also don't like server version too much. I prefer the usage of a 
>>>> GUI.
>>>>
>>>> I ended up getting lucky and finding my original flash drive that I 
>>>> used two years ago. This drive had the Ubuntu 24.04.2 LTS ISO installed on 
>>>> it. I went ahead and gave this a try. My installation of Ubuntu went 
>>>> without any hiccups.
>>>>
>>>> That being said, once Ubuntu installed I followed the Debian install on 
>>>> weewx website. After that was done I got some insufficient permission 
>>>> errors with weewx. This isn't a weewx problem and there was no need for me 
>>>> to go down the rabbit hole of creating udevs and such. When weewx installs 
>>>> it creates a bunch of groups and with Ubuntu any group policy that is made 
>>>> a complete restart is needed.
>>>>
>>>> I restarted the computer and checked the HTML path and sure if enough 
>>>> the Index.HTML file was there. I proceeded to edit my config file to get 
>>>> up 
>>>> and running on CWOP.
>>>>
>>>> My weather station is now live and showing data.
>>>>
>>>> Again, thanks to all of those that helped, it was much appreciated.
>>>>
>>>> Mike
>>>>
>>>> On Wednesday, March 11, 2026 at 4:46:33 PM UTC-4 Mike Book wrote:
>>>>
>>>>> Thank you friend,
>>>>>
>>>>> I have it downloading now. I also got a desktop version of 22.04.5 
>>>>> which resembles exactly how I remember my desktop looking before updating 
>>>>> the current software.
>>>>>
>>>>> I will try it later tonight to see if it works.
>>>>>
>>>>>
>>>>> On Wednesday, March 11, 2026 at 3:31:08 PM UTC-4 Tom Keffer wrote:
>>>>>
>>>>>> My apologies. I missed that point.
>>>>>>
>>>>>> Just use the same URL, except substitute 24.04.3 for 24.04.4:
>>>>>>
>>>>>>
>>>>>> https://ubuntu.com/download/server/thank-you?version=24.04.3&architecture=amd64&lts=true
>>>>>>
>>>>>> -tk
>>>>>>
>>>>>> On Wed, Mar 11, 2026 at 11:41 AM Mike Book <[email protected]> 
>>>>>> wrote:
>>>>>>
>>>>>>> yes but it appears this version is the version that kills the 
>>>>>>> Acurite driver. Was looking to get 24.04.3 which I had last year and 
>>>>>>> had 
>>>>>>> never updated.
>>>>>>>
>>>>>>> On Wednesday, March 11, 2026 at 2:26:15 PM UTC-4 Tom Keffer wrote:
>>>>>>>
>>>>>>>> Until 26.04 comes out, that's the current "Long Term Support" 
>>>>>>>> version. You can find it on their download page: 
>>>>>>>> https://ubuntu.com/download/server
>>>>>>>>
>>>>>>>> On Wed, Mar 11, 2026 at 10:54 AM Mike Book <[email protected]> 
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Since it was mentioned that there has been issues with acurite 
>>>>>>>>> drivers from newer Linux distros it has occurred to me that is more 
>>>>>>>>> than 
>>>>>>>>> likely the issue.
>>>>>>>>>
>>>>>>>>> When I first installed my weather station in 2025 Ubuntu 24.04.4 
>>>>>>>>> had not been released. I'm pretty sure I was running 24.04.3 and I 
>>>>>>>>> took a 
>>>>>>>>> look through the forums and it appears the consensus was to install 
>>>>>>>>> that 
>>>>>>>>> version of Ubuntu.
>>>>>>>>>
>>>>>>>>> Problem is I moved recently and can't find the original USB drive 
>>>>>>>>> I used to install Ubuntu.
>>>>>>>>>
>>>>>>>>> I've tried getting the ISO direct from Ubuntu but that hasn't 
>>>>>>>>> helped. I'm wondering if anyone knows where I can get the amd64 iso 
>>>>>>>>> for 
>>>>>>>>> 24.04.3. 
>>>>>>>>>
>>>>>>>>> On Wednesday, March 11, 2026 at 12:11:47 PM UTC-4 Pablo Sanchez 
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> I use openSUSE Tumbleweed. I installed weewx using the pip method 
>>>>>>>>>> - https://weewx.com/docs/5.3/quickstarts/pip/
>>>>>>>>>>
>>>>>>>>>> It works great!
>>>>>>>>>>
>>>>>>>>>> I should probably update the OS as it has been 50 odd days since 
>>>>>>>>>> my last update. :) 
>>>>>>>>>>
>>>>>>>>>> ---
>>>>>>>>>> pablo
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 2026-03-11 12:04, Mike Book wrote:
>>>>>>>>>>
>>>>>>>>>> I thank you for that but I have searched the forums for my exact 
>>>>>>>>>> errors and everything that is listed has not worked. 
>>>>>>>>>>
>>>>>>>>>> I recently got openSUSE installed to try that but it won't 
>>>>>>>>>> install.
>>>>>>>>>> mike@mint:~> sudo rpm --import https://weewx.com/keys.html 
>>>>>>>>>> [sudo] password for root:  
>>>>>>>>>> mike@mint:~> curl -s https://weewx.com/suse/weewx.repo | \ 
>>>>>>>>>> >     sudo tee /etc/zypp/repos.d/weewx.repo 
>>>>>>>>>> [weewx] 
>>>>>>>>>> name=weewx 
>>>>>>>>>> baseurl=http://weewx.com/suse/weewx/suse$releasever_major 
>>>>>>>>>> enabled=1 
>>>>>>>>>> gpgcheck=1 
>>>>>>>>>> mike@mint:~> sudo zypper install weewx 
>>>>>>>>>> Error building the cache: 
>>>>>>>>>> [weewx|http://weewx.com/suse/weewx/suse20260308] Failed to 
>>>>>>>>>> retrieve new repository metadata. 
>>>>>>>>>> History: 
>>>>>>>>>> - [weewx|http://weewx.com/suse/weewx/suse20260308] Repository 
>>>>>>>>>> type can't be determined. 
>>>>>>>>>> Warning: Skipping repository 'weewx' because of the above error. 
>>>>>>>>>> Some of the repositories have not been refreshed because of an 
>>>>>>>>>> error. 
>>>>>>>>>> Loading repository data... 
>>>>>>>>>> Reading installed packages... 
>>>>>>>>>> 'weewx' not found in package names. Trying capabilities. 
>>>>>>>>>> No provider of 'weewx' found. 
>>>>>>>>>> Resolving package dependencies... 
>>>>>>>>>> Nothing to do. 
>>>>>>>>>> mike@mint:~> 
>>>>>>>>>>
>>>>>>>>>> This is all I got. I'm not sure what could be wrong here.
>>>>>>>>>>
>>>>>>>>>> To the previous. I understand nothing much has changed on Weewx 
>>>>>>>>>> which I get but something isn't right.
>>>>>>>>>>
>>>>>>>>>> If its not Ubuntu distro then that makes sense but I'm pretty 
>>>>>>>>>> sure I never updated my distro previously until the SDD crash and it 
>>>>>>>>>> worked 
>>>>>>>>>> fine. 
>>>>>>>>>>
>>>>>>>>>> If its a distro issue then some guidance would be great. Again 
>>>>>>>>>> searched the forums and not finding much that helps.
>>>>>>>>>>
>>>>>>>>>> On Wednesday, March 11, 2026 at 11:53:55 AM UTC-4 p q wrote:
>>>>>>>>>>
>>>>>>>>>>> There's a problem with the more recent Linux versions and the 
>>>>>>>>>>> USB Acurite interface. Search this forum for conversations about it.
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Mar 11, 2026 at 8:35 AM Tom Keffer <[email protected]> 
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> While things like logging have changed, the guts of the Acurite 
>>>>>>>>>>>> driver has not changed since v3.9.2 in early 2019.
>>>>>>>>>>>>
>>>>>>>>>>>> When you updated your copy of Ubuntu, did it change the version 
>>>>>>>>>>>> of Python? There have been some problems with pyusb and Python 12.
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Mar 11, 2026 at 7:18 AM Mike Book <[email protected]> 
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Oh I'm not even getting the HTML file.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Weewx won't make that file if it isn't collecting any data. 
>>>>>>>>>>>>> Since I'm currently getting absolutely nothing for the data thus 
>>>>>>>>>>>>> no file.
>>>>>>>>>>>>>
>>>>>>>>>>>>> This is version 5.3 that I was installing. My last system that 
>>>>>>>>>>>>> worked was on the same Ubuntu OS but I was using weewx 5.1.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Not sure if there is a problem with Weewx.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Currently I'm attempting to install an openSUSE system and 
>>>>>>>>>>>>> going to try installing that way. Hopefully it will work.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wednesday, March 11, 2026 at 10:14:27 AM UTC-4 Steven Hulse 
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Mike, 
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm experiencing a similar issue after an update to 5.3 in 
>>>>>>>>>>>>>> Linux Mint. Did you check the web page that comes with Weewx? I 
>>>>>>>>>>>>>> looked at 
>>>>>>>>>>>>>> mine, and it is gathering data, so that's a way you can test to 
>>>>>>>>>>>>>> see if it's 
>>>>>>>>>>>>>> still working. My problem is that it's not publishing to 
>>>>>>>>>>>>>> Weatherunderground 
>>>>>>>>>>>>>> anymore. Is that what you are experiencing (not publishing)?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tuesday, March 10, 2026 at 10:10:45 AM UTC-6 Mike Book 
>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hey all, 
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> At one point weewx was working just fine for me. I had an 
>>>>>>>>>>>>>>> issue with the PC and had to update with a fresh install of 
>>>>>>>>>>>>>>> Ubuntu.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I have no idea what is wrong here but with the new install 
>>>>>>>>>>>>>>> and following the debian install tutorial to the tee I'm 
>>>>>>>>>>>>>>> getting USB errors 
>>>>>>>>>>>>>>> on weewx.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ● weewx.service - WeeWX
>>>>>>>>>>>>>>>      Loaded: loaded (/usr/lib/systemd/system/weewx.service; 
>>>>>>>>>>>>>>> enabled; preset: enabled)
>>>>>>>>>>>>>>>      Active: active (running) since Tue 2026-03-10 11:51:36 
>>>>>>>>>>>>>>> EDT; 7min ago
>>>>>>>>>>>>>>>        Docs: https://weewx.com/docs
>>>>>>>>>>>>>>>    Main PID: 6217 (python3)
>>>>>>>>>>>>>>>       Tasks: 2 (limit: 8004)
>>>>>>>>>>>>>>>      Memory: 16.9M (peak: 17.3M)
>>>>>>>>>>>>>>>         CPU: 327ms
>>>>>>>>>>>>>>>      CGroup: /system.slice/weewx.service
>>>>>>>>>>>>>>>              └─6217 python3 /usr/share/weewx/weewxd.py 
>>>>>>>>>>>>>>> /etc/weewx/weewx.conf
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Mar 10 11:57:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: INFO weewx.engine: 'pyephem' detected, extended 
>>>>>>>>>>>>>>> almanac data 
>>>>>>>>>>>>>>> is available
>>>>>>>>>>>>>>> Mar 10 11:57:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: INFO __main__: Starting up weewx version 5.3.1
>>>>>>>>>>>>>>> Mar 10 11:57:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: INFO weewx.engine: Using binding 'wx_binding' to 
>>>>>>>>>>>>>>> database 
>>>>>>>>>>>>>>> 'weewx.sdb'
>>>>>>>>>>>>>>> Mar 10 11:57:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: INFO weewx.manager: Starting backfill of daily 
>>>>>>>>>>>>>>> summaries
>>>>>>>>>>>>>>> Mar 10 11:57:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: INFO weewx.manager: Empty database
>>>>>>>>>>>>>>> Mar 10 11:57:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: INFO weewx.engine: Starting main packet loop.
>>>>>>>>>>>>>>> Mar 10 11:57:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: ERROR weewx.drivers.acurite: Failed attempt 1 of 
>>>>>>>>>>>>>>> 10 to get 
>>>>>>>>>>>>>>> LOOP data: [Errno 5] Input/Output Error
>>>>>>>>>>>>>>> Mar 10 11:58:07 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: ERROR weewx.drivers.acurite: Failed attempt 2 of 
>>>>>>>>>>>>>>> 10 to get 
>>>>>>>>>>>>>>> LOOP data: [Errno 5] Input/Output Error
>>>>>>>>>>>>>>> Mar 10 11:58:37 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: ERROR weewx.drivers.acurite: Failed attempt 3 of 
>>>>>>>>>>>>>>> 10 to get 
>>>>>>>>>>>>>>> LOOP data: [Errno 5] Input/Output Error
>>>>>>>>>>>>>>> Mar 10 11:59:07 weatherstation-ThinkCentre-M715q 
>>>>>>>>>>>>>>> weewxd[6217]: ERROR weewx.drivers.acurite: Failed attempt 4 of 
>>>>>>>>>>>>>>> 10 to get 
>>>>>>>>>>>>>>> LOOP data: [Errno 5] Input/Output Error
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> This is the error I'm getting.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> When I list my USB devices I do see the weather station.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> weatherstation@weatherstation-ThinkCentre-M715q:~$ lsusb
>>>>>>>>>>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root 
>>>>>>>>>>>>>>> hub
>>>>>>>>>>>>>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root 
>>>>>>>>>>>>>>> hub
>>>>>>>>>>>>>>> Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub
>>>>>>>>>>>>>>> Bus 002 Device 003: ID 2357:012d TP-Link Archer T3U [Realtek 
>>>>>>>>>>>>>>> RTL8812BU]
>>>>>>>>>>>>>>> Bus 002 Device 004: ID 046d:c534 Logitech, Inc. Unifying 
>>>>>>>>>>>>>>> Receiver
>>>>>>>>>>>>>>> Bus 002 Device 005: ID 24c0:0003 Chaney Instrument Model 
>>>>>>>>>>>>>>> 01036 weather center
>>>>>>>>>>>>>>> Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root 
>>>>>>>>>>>>>>> hub
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Oddly enough my weather station is not a 01036 it is an 
>>>>>>>>>>>>>>> 02064. Like stated this was working a day ago until the PC 
>>>>>>>>>>>>>>> problems.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> When I put the USB devices as a tree this is what I see.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> lsusb -t
>>>>>>>>>>>>>>> /:  Bus 001.Port 001: Dev 001, Class=root_hub, 
>>>>>>>>>>>>>>> Driver=ehci-pci/1p, 480M
>>>>>>>>>>>>>>> /:  Bus 002.Port 001: Dev 001, Class=root_hub, 
>>>>>>>>>>>>>>> Driver=xhci_hcd/4p, 480M
>>>>>>>>>>>>>>>     |__ Port 001: Dev 005, If 0, Class=Human Interface 
>>>>>>>>>>>>>>> Device, Driver=[none], 1.5M
>>>>>>>>>>>>>>>     |__ Port 004: Dev 002, If 0, Class=Hub, Driver=hub/4p, 
>>>>>>>>>>>>>>> 480M
>>>>>>>>>>>>>>>         |__ Port 001: Dev 003, If 0, Class=Vendor Specific 
>>>>>>>>>>>>>>> Class, Driver=rtw88_8822bu, 480M
>>>>>>>>>>>>>>>         |__ Port 003: Dev 004, If 0, Class=Human Interface 
>>>>>>>>>>>>>>> Device, Driver=usbhid, 12M
>>>>>>>>>>>>>>>         |__ Port 003: Dev 004, If 1, Class=Human Interface 
>>>>>>>>>>>>>>> Device, Driver=usbhid, 12M
>>>>>>>>>>>>>>> /:  Bus 003.Port 001: Dev 001, Class=root_hub, 
>>>>>>>>>>>>>>> Driver=xhci_hcd/4p, 5000M
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Also, the 02064 doesn't have the USB modes to select. This 
>>>>>>>>>>>>>>> automatically ports to USB 4 I think per weewx hardware 
>>>>>>>>>>>>>>> information. That 
>>>>>>>>>>>>>>> will not be something I can change.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Any guidance would be appreciated.
>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>> Mike
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -- 
>>>>>>>>>>>>> You received this message because you are subscribed to the 
>>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from 
>>>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>>>> To view this discussion visit 
>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/4e2db14c-0af0-4684-8a1e-da75c77a3e64n%40googlegroups.com
>>>>>>>>>>>>>  
>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/4e2db14c-0af0-4684-8a1e-da75c77a3e64n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>> .
>>>>>>>>>>>>>
>>>>>>>>>>>> -- 
>>>>>>>>>>>> You received this message because you are subscribed to the 
>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from 
>>>>>>>>>>>> it, send an email to [email protected].
>>>>>>>>>>>>
>>>>>>>>>>> To view this discussion visit 
>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/CAPq0zEBHs%3DY5FutDxs2L89TxVWnv8JU39_C4rpsuDx2tt_2ARA%40mail.gmail.com
>>>>>>>>>>>>  
>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/CAPq0zEBHs%3DY5FutDxs2L89TxVWnv8JU39_C4rpsuDx2tt_2ARA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> -- 
>>>>>>>>>>> Peter Quinn
>>>>>>>>>>> (415)794-2264 <(415)%20794-2264>
>>>>>>>>>>>
>>>>>>>>>> -- 
>>>>>>>>>> You received this message because you are subscribed to the 
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, 
>>>>>>>>>> send an email to [email protected].
>>>>>>>>>>
>>>>>>>>>> To view this discussion visit 
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0f43d730-53d9-46a8-9375-c564c0d0f0d3n%40googlegroups.com
>>>>>>>>>>  
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/0f43d730-53d9-46a8-9375-c564c0d0f0d3n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> -- 
>>>>>>>>> You received this message because you are subscribed to the Google 
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, 
>>>>>>>>> send an email to [email protected].
>>>>>>>>>
>>>>>>>> To view this discussion visit 
>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/d0a6d8d9-10bf-43ea-909a-6434adea9c26n%40googlegroups.com
>>>>>>>>>  
>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/d0a6d8d9-10bf-43ea-909a-6434adea9c26n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>>
>>>>>>>> -- 
>>>>>>> You received this message because you are subscribed to the Google 
>>>>>>> Groups "weewx-user" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it, 
>>>>>>> send an email to [email protected].
>>>>>>>
>>>>>> To view this discussion visit 
>>>>>>> https://groups.google.com/d/msgid/weewx-user/26942ed5-672d-4970-b8b9-c4f5cf1f7545n%40googlegroups.com
>>>>>>>  
>>>>>>> <https://groups.google.com/d/msgid/weewx-user/26942ed5-672d-4970-b8b9-c4f5cf1f7545n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>>
>>>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to [email protected].
>>>>
>>> To view this discussion visit 
>>>> https://groups.google.com/d/msgid/weewx-user/0a528d2d-3230-4427-981b-f8f64f572839n%40googlegroups.com
>>>>  
>>>> <https://groups.google.com/d/msgid/weewx-user/0a528d2d-3230-4427-981b-f8f64f572839n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>>
> To view this discussion visit 
>> https://groups.google.com/d/msgid/weewx-user/fc51a438-3d62-4a36-91d4-0d2e1d998456n%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/weewx-user/fc51a438-3d62-4a36-91d4-0d2e1d998456n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/weewx-user/39d176cc-792e-4d9d-a194-288dbde089a3n%40googlegroups.com.

Reply via email to