@Tom Yes that seems to work... On Thu, 25 Sept 2025 at 06:29, Tom Keffer <[email protected]> wrote:
> I see one possible point of confusion. For baromin, they say > > baromin > number > > Relative Pressure i.e. pressure adjusted to sea level (Inch of Mercury) > > This seems like they expect an adjustment *only* for altitude, not > temperature. If that's the case, then the correct WeeWX observation type > would be "altimeter", not "barometer". > > @John Smith <[email protected]> : could you try making the switch > and see if that makes a difference in your results? > > On Wed, Sep 24, 2025 at 3:15 AM Glenn McKechnie <[email protected]> > wrote: > >> Spent some time trying to understand this and what might have changed, We >> were using absbaromin to get the corrected readings when it was first >> implemented, and as John said this was because baromin gave readings that >> were too high. That now seems to have flipped, we're back to ridiculous >> highs again. >> >> We started back around the 16th, and all the pressure data prior to the >> 19th @ 19:45 is missing for Aus. So ? ; one of life's little mysteries I >> guess. >> >> Rather than questioning my sanity any further, I've checked out the >> development driver for restx.py and am using it in place of the previous >> one. >> >> Now barometer = baromin works, as does pressure = absbaromin >> >> We are back to sane values. The development driver works. >> >> Comparing the output to the official BOM values from the local airport, >> I'm within range. >> They are at 435 metres, I'm at 455 metres - close enough >> >> >> Cheers >> Glenn >> >> Various WeeWx addons at >> https://github.com/glennmckechnie >> >> >> On Wed, 24 Sept 2025 at 19:24, Graham Eddy <[email protected]> wrote: >> >>> ditto. just waiting for it to settle, then deploy >>> *⊣GE⊢* >>> >>> On 24 Sep 2025, at 6:10 pm, 'steepleian' via weewx-user < >>> [email protected]> wrote: >>> >>> I am a current WOW user and intend to continue with the new service. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion visit >>> https://groups.google.com/d/msgid/weewx-user/9C991DEF-EA73-4C4F-9C4B-D8EF19DAA641%40geddy.au >>> <https://groups.google.com/d/msgid/weewx-user/9C991DEF-EA73-4C4F-9C4B-D8EF19DAA641%40geddy.au?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion visit >> https://groups.google.com/d/msgid/weewx-user/CAAraAzi1K%3Du6kGVhTzCymJjJe21N1MTTO7ahx9m_%2BU-TncT4YQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/weewx-user/CAAraAzi1K%3Du6kGVhTzCymJjJe21N1MTTO7ahx9m_%2BU-TncT4YQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/CAGTinV44DvZgB64vh_AMxk13fv67RiZiChEHbUcJQUGqGxDSag%40mail.gmail.com.
