Thanks a lot. I've successfully installed it and can see loop output from a 
direct run. However, after restarting weewx and tracing the log, no weewx 
publishing. Is the gateway supporting fineoffset-wh65b? If not, could you 
guide me as to how I add the data mapping?...thanks.

On Monday, 15 September 2025 at 23:40:48 UTC+7 steepleian wrote:

> https://github.com/Millardiang/weewx-gw1000
>
> https://claydonsweather.org.uk
>
> On 15 Sep 2025, at 16:00, Chotechai Piyavongsiri <[email protected]> wrote:
>
> Hi,
>
>
> I've just replaced my broken Tempest with Fineoffset WH65B and GW1000. It 
> seems all the links to gw1000 driver are dead.
> Could someone point me to the right link? thanks.
>
> On Friday, 18 August 2023 at 10:59:12 UTC+7 Tom Keffer wrote:
>
>> Take that back. I was able to reproduce this problem. The extension is 
>> being installed in a non-standard spot. I'll look into it.
>>
>> On Thu, Aug 17, 2023 at 3:48 PM Tom Keffer <[email protected]> wrote:
>>
>>> I tried this myself, and it worked fine.
>>>
>>> Despite what the GW1000 README says, the current release is 0.4.2, not 
>>> 0.5.0b5. It's possible the older version has the problem, but the younger 
>>> version does not. Also, note that with V5, you can do the download and 
>>> install in one command. So, you want
>>>
>>> *sudo weectl extension install 
>>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.4.2/gw1000-0.4.2.tar.gz
>>>  
>>> <https://github.com/gjr80/weewx-gw1000/releases/download/v0.4.2/gw1000-0.4.2.tar.gz>*
>>>
>>>
>>> Afterwards, "weectl extension list" shows that it installed.
>>>
>>>
>>> -tk
>>>
>>>
>>>
>>> On Tue, Aug 15, 2023 at 8:44 AM 'steepleian' via weewx-user <
>>> [email protected]> wrote:
>>>
>>>> With a pip install you don’t need sudo. Also did you run 
>>>>
>>>> weectl station reconfigure 
>>>>
>>>> to actually select the driver?
>>>> Then 
>>>> sudo systemctl restart weewx 
>>>> (sudo is needed in this instance).
>>>>
>>>> https://claydonsweather.org.uk
>>>>
>>>> On 15 Aug 2023, at 09:42, [email protected] <[email protected]> 
>>>> wrote:
>>>>
>>>> Hi Ian
>>>> Thanks for looking.
>>>> I used this command to install WeeWx:
>>>>
>>>> sudo apt install ./python3-weewx_5.0.0a24-a_all.deb
>>>>
>>>>
>>>> and this command to install GW1000
>>>>
>>>>
>>>> sudo weectl extension install 
>>>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.5.0b5/gw1000-0.5.0b5.tar.gz
>>>>
>>>>
>>>> From syslog:
>>>>
>>>> Aug 15 10:36:01 raspberrypi weewx[677] INFO weewx.engine: Loading 
>>>> station type GW1000 (user.gw1000)
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: Caught 
>>>> unrecoverable exception:
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     ****  No 
>>>> module named 'user.gw1000'
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     **** 
>>>>  Traceback (most recent call last):
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     ****   
>>>>  File "/usr/share/weewx/weewxd.py", line 149, in main
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     ****     
>>>>  engine = weewx.engine.StdEngine(config_dict)
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     ****   
>>>>  File "/usr/share/weewx/weewx/engine.py", line 78, in __init__
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     ****     
>>>>  self.setupStation(config_dict)
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     ****   
>>>>  File "/usr/share/weewx/weewx/engine.py", line 105, in setupStation
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     ****     
>>>>  __import__(driver)
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     **** 
>>>>  ModuleNotFoundError: No module named 'user.gw1000'
>>>> Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__:     **** 
>>>>  Exiting.
>>>> Aug 15 10:36:01 raspberrypi systemd[1]: weewx.service: Main process 
>>>> exited, code=exited, status=1/FAILURE
>>>> Aug 15 10:36:01 raspberrypi systemd[1]: weewx.service: Failed with 
>>>> result 'exit-code'.
>>>>
>>>>
>>>> I have attached the weewx.conf file
>>>>
>>>>
>>>> Gert
>>>>
>>>>
>>>>
>>>>
>>>> On Tuesday, August 15, 2023 at 8:52:05 AM UTC+2 Ian Millard wrote:
>>>>
>>>>> How did you attempt the install? I am running version 5 with a pip 
>>>>> installation. I am also running the Gateway driver and it installed 
>>>>> seamlessly using weectl extension install [URL]
>>>>>
>>>>> Sent from my iPad.
>>>>>
>>>>> On 15 Aug 2023, at 05:57, [email protected] <[email protected]> 
>>>>> wrote:
>>>>>
>>>>> Hi Vince
>>>>>
>>>>> I followed the installation guide for the driver, but the installation 
>>>>> used the folder structure from WeeWx version 4.
>>>>>
>>>>> Rgds
>>>>> Gert
>>>>>
>>>>> On Tuesday, August 15, 2023 at 1:44:12 AM UTC+2 vince wrote:
>>>>>
>>>>>> sure why wouldn't it be ?
>>>>>>
>>>>>> On Monday, August 14, 2023 at 2:03:23 PM UTC-7 [email protected] 
>>>>>> wrote:
>>>>>>
>>>>>>> Hi
>>>>>>> Is it possible to install the gateway with WeeWx 5.0
>>>>>>>
>>>>>>> Thanks
>>>>>>> Gert
>>>>>>>
>>>>>> -- 
>>>>> You received this message because you are subscribed to the Google 
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>>> an email to [email protected].
>>>>> To view this discussion on the web visit 
>>>>> https://groups.google.com/d/msgid/weewx-user/99af5f5f-3f49-441d-acf0-e4006a1e734fn%40googlegroups.com
>>>>>  
>>>>> <https://groups.google.com/d/msgid/weewx-user/99af5f5f-3f49-441d-acf0-e4006a1e734fn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to [email protected].
>>>> To view this discussion on the web visit 
>>>> https://groups.google.com/d/msgid/weewx-user/3cac5915-3b90-44f0-9f5d-e6e85ec506f4n%40googlegroups.com
>>>>  
>>>> <https://groups.google.com/d/msgid/weewx-user/3cac5915-3b90-44f0-9f5d-e6e85ec506f4n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>> <weewx.conf>
>>>>
>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to [email protected].
>>>> To view this discussion on the web visit 
>>>> https://groups.google.com/d/msgid/weewx-user/0A38E170-E51D-400D-BAAC-509EA31550EB%40btinternet.com
>>>>  
>>>> <https://groups.google.com/d/msgid/weewx-user/0A38E170-E51D-400D-BAAC-509EA31550EB%40btinternet.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
>
> To view this discussion visit 
> https://groups.google.com/d/msgid/weewx-user/d02de458-3ea0-48de-b5b1-2f9c7f026c24n%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/weewx-user/d02de458-3ea0-48de-b5b1-2f9c7f026c24n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/weewx-user/02598299-1a62-4b93-b535-ad2ad0c8aeb8n%40googlegroups.com.

Reply via email to