WeeWX: altimeter': '30.029 barometer': '29.98 pressure': '28.058 KPSK 2025-08-24 08:35:00 altimeter = 30.02 inHg
KPSK 2025-08-24 08:35:00 SLP =1014.22 = 29.95 inHg You are spot on with altimeter! KPSK does not publish SLP in its METAR so I had to hunt around for it. You can us your NWS Time series Viewer to get SLP.. WeeWX refers to SLP as "barometer". I'd say you are now calibrated. On Sunday, August 24, 2025 at 9:06:51 AM UTC-4 kufuu wrote: > > *Current conditions at* Dublin / New River Valley (KPSK) *Lat: *37.13°N > *Lon: *80.68°W*Elev: *2106ft. > > Overcast > > 67°F > > 19°C > > *Humidity* > 88% > *Wind Speed* > SW 3 mph > *Barometer* > 30.02 in > *Dewpoint* > 64°F (18°C) > *Visibility* > 10.00 mi > *Last update* > 24 Aug 8:35 am EDT > > On Sunday, August 24, 2025 at 8:56:35 AM UTC-4 kufuu wrote: > >> REC: 2025-08-24 08:50:00 EDT (1756039800) 'altimeter': >> '30.029532326429237', 'appTemp': '72.57562147734592', 'barometer': >> '29.981221699640386', 'cloudbase': '2929.6889799923492', 'dateTime': >> '1756039800', 'dewpoint': '63.31536848803366', 'ET': 'None', 'heatindex': >> '68.495', 'humidex': '78.03578397157159', 'inDewpoint': >> '54.71694388930514', 'inHumidity': '61', 'inTemp': '68.72', 'interval': >> '5', 'maxSolarRad': '315.9994602721425', 'outHumidity': '85', 'outTemp': >> '68.0', 'pressure': '28.058911365', 'rain': '0.0', 'rainRate': '0.0', >> 'usUnits': '1', 'windchill': '68.0', 'windDir': 'None', 'windGust': '0.0', >> 'windGustDir': 'None', 'windrun': '0.0', 'windSpeed': '0.0' >> LOOP: 2025-08-24 08:51:41 EDT (1756039901) 'altimeter': >> '30.029532326429237', 'appTemp': '72.82860931324616', 'barometer': >> '29.98054422916703', 'cloudbase': '2930.511265697056', 'dateTime': >> '1756039901', 'dewpoint': '63.49175043093296', 'ET': 'None', 'heatindex': >> '68.69300000000001', 'humidex': '78.34213268284668', 'inDewpoint': >> '54.71694388930514', 'inHumidity': '61', 'inTemp': '68.72', >> 'inTempBatteryStatus': '0', 'maxSolarRad': '322.44979536500733', >> 'outHumidity': '85', 'outTemp': '68.18', 'outTempBatteryStatus': '0', >> 'pressure': '28.058911365', 'rain': 'None', 'rainBatteryStatus': '0', >> 'rainRate': '0.0', 'rxCheckPercent': '100', 'usUnits': '1', >> 'windBatteryStatus': '0', 'windchill': '68.18', 'windDir': 'None', >> 'windGust': '0.0', 'windGustDir': 'None', 'windrun': 'None', 'windSpeed': >> '0.0' >> >> >> On Saturday, August 23, 2025 at 7:11:17 PM UTC-4 [email protected] >> wrote: >> >>> Unfortunately your LaCrosse model has been "retired" and from looking at >>> a number of posts at wxforum.net it appears that your absolute pressure >>> value is not user adjustable. Therefore, we can try using WeeWX to >>> modify/re-calibrate your absolute pressure/pressure. >>> >>> Restore the station altitude back to 1865 ft Try putting in a >>> calibration offset of -1.79 inHg. in your weewx.conf file (see below). >>> Restart WeeWX then run another LOOP to obtain the three pressures; >>> "pressure", "altimeter" and "barometer" to see iif barometer and altimeter >>> seem to be more accurate. When you are comparing pressure values from your >>> weather station to an airport you must ensure tht both you and the >>> airport you are comparing with is in the same pressure system, i.e, the >>> same high pressure or low pressure system, KPSK is considered to be a >>> close-by airport 15 miles/25 km so chances are you should be in the same >>> pressure system. Any other airport farther away gets a bit trickier. >>> >>> If you wish to read a bit more about barometer set-up, configuration and >>> troubleshooting, check out the barometer wiki at >>> www.barometer-wiki.ca/barometer. >>> >>> Good luck! >>> >>> [StdCalibrate] >>> [[Corrections]] >>> pressure = pressure - 1.79 >>> >>> On Friday, August 22, 2025 at 9:18:07 AM UTC-4 kufuu wrote: >>> >>>> Thanks >>>> >>>> On Friday, August 22, 2025 at 8:22:25 AM UTC-4 [email protected] >>>> wrote: >>>> >>>>> EDIT: Sorry. I meant to say station pressure calculator not station >>>>> elevation calculator >>>>> You can use this station pressure calculator: >>>>> https://www.sensorsone.com/elevation-station-qfe-sea-level-qnh-pressure-calculator/?ab=1&v0=1865&f0=ft&f1=inHg0C&f2=inHg0C >>>>> >>>>> Note: This calculator uses aviation terms. QFE = station pressure and >>>>> QNH = altimeter setting. I've already entered in your elevation. All you >>>>> have to do is enter in the altimeter setting of your airport in the QNH >>>>> input field and the calculator will calculate your QFE (station pressure). >>>>> --- >>>>> >>>>> On Thursday, August 21, 2025 at 2:49:01 PM UTC-4 [email protected] >>>>> wrote: >>>>> >>>>>> Given: >>>>>> >>>>>> Aug 20 6:35 pm >>>>>> >>>>>> Altitude (true) = 1865 ft >>>>>> WeeWX altitude = 70 ft >>>>>> WeeWX altimeter= 29.86 inHg (rounded)) >>>>>> WeeWX barometer = 29.85 inHg (rounded) >>>>>> WeeWX pressure = 29.78 inHg (rounded) >>>>>> >>>>>> NOTE: at altitude = 70 ft we are very close to sea level (altitude = >>>>>> 0). As mentioned in my previous post, all three pressures >>>>>> hypothetically, >>>>>> should be the same at sea level. We can see that clearly happening at >>>>>> the >>>>>> 70 ft altitude where the readings start getting closer together. >>>>>> >>>>>> Aug 20 18:35 (from mesowest): >>>>>> >>>>>> KPSK elevation = 2106 ft >>>>>> KPSK pressure = 27.74 >>>>>> KPSK altimeter = 29.95 >>>>>> >>>>>> EXAMPLE station elevation calculation: >>>>>> >>>>>> LaCrosse true altitude = 1865 ft >>>>>> KPSK altimeter= 29.95 inHg >>>>>> >>>>>> Solving for LaCrosse "pressure" = 27.99 inHg >>>>>> >>>>>> As reported LaCrosse "pressure" = 29.78 inHg >>>>>> >>>>>> It looks like your current pressure of 29.78 is much too high. >>>>>> >>>>>> In order to calculate altimeter, at a location with a 1865 ft >>>>>> altitude, your relative pressure on your console should always be >>>>>> reading >>>>>> 1.96 Hg higher than your current live absolute pressure ("pressure"). >>>>>> >>>>>> To re-calibrate your display console: >>>>>> >>>>>> 1. Calculate your station pressure (follow the example above) and >>>>>> then add 1.96 to this number to get your corrected relative pressure. >>>>>> Modify the existing relative pressure in your display console. >>>>>> 2. Your pressure is wrong and you will have to fix it. I was unable >>>>>> to find a way to modify your absolute pressure from your manual. You may >>>>>> have to contact LaCrosse and see how this may be done. >>>>>> 3. Alternatively, I believe there is a way to add a pressure >>>>>> calibration offset in the WeeWX config file. >>>>>> 4. Once you fixed your absolute pressure and relative pressure,, >>>>>> don'forget to put back your correct station altitude of 1865 ft. >>>>>> --- >>>>>> >>>>>> On Wednesday, August 20, 2025 at 7:11:02 PM UTC+4 kufuu wrote: >>>>>> >>>>>>> Correction , I have weewx set at 70ft elevation to try and match >>>>>>> another weather station, sorry about that. >>>>>>> >>>>>>> >>>>>>> On Wednesday, August 20, 2025 at 6:50:00 PM UTC-4 kufuu wrote: >>>>>>> >>>>>>>> Im about 15 miles away >>>>>>>> >>>>>>>> On Wednesday, August 20, 2025 at 6:47:42 PM UTC-4 kufuu wrote: >>>>>>>> >>>>>>>>> My actual elevation is 1865ft , weewx is set to 0 >>>>>>>>> >>>>>>>>> Using configuration file /etc/weewx/weewx.conf >>>>>>>>> REC: 2025-08-20 18:35:00 EDT (1755729300) 'altimeter': >>>>>>>>> '29.856197863702114', 'appTemp': '84.16620032955495', 'barometer': >>>>>>>>> '29.850973617639387', 'cloudbase': '1750.7310847902036', 'dateTime': >>>>>>>>> '1755729300', 'dewpoint': '69.42478322692313', 'ET': 'None', >>>>>>>>> 'heatindex': >>>>>>>>> '77.86800000000002', 'humidex': '91.66911741879971', 'inDewpoint': >>>>>>>>> '56.232061622715676', 'inHumidity': '56', 'inTemp': >>>>>>>>> '72.86000000000001', >>>>>>>>> 'interval': '5', 'maxSolarRad': '192.36417227192797', 'outHumidity': >>>>>>>>> '78', >>>>>>>>> 'outTemp': '76.82000000000002', 'pressure': '29.778039395', 'rain': >>>>>>>>> '0.0', >>>>>>>>> 'rainRate': '0.0', 'usUnits': '1', 'windchill': '76.82000000000002', >>>>>>>>> 'windDir': 'None', 'windGust': '0.0', 'windGustDir': 'None', >>>>>>>>> 'windrun': >>>>>>>>> '0.0', 'windSpeed': '0.0' >>>>>>>>> >>>>>>>>> LOOP: 2025-08-20 18:35:44 EDT (1755729344) 'altimeter': >>>>>>>>> '29.856197863702114', 'appTemp': '84.16620032955495', 'barometer': >>>>>>>>> '29.850973617639387', 'cloudbase': '1750.7310847902036', 'dateTime': >>>>>>>>> '1755729344', 'dewpoint': '69.42478322692313', 'ET': 'None', >>>>>>>>> 'heatindex': >>>>>>>>> '77.86800000000002', 'humidex': '91.66911741879971', 'inDewpoint': >>>>>>>>> '56.232061622715676', 'inHumidity': '56', 'inTemp': >>>>>>>>> '72.86000000000001', >>>>>>>>> 'inTempBatteryStatus': '0', 'maxSolarRad': '189.6877965534115', >>>>>>>>> 'outHumidity': '78', 'outTemp': '76.82000000000002', >>>>>>>>> 'outTempBatteryStatus': '0', 'pressure': '29.778039395', 'rain': >>>>>>>>> 'None', >>>>>>>>> 'rainBatteryStatus': '0', 'rainRate': '0.0', 'rxCheckPercent': '100', >>>>>>>>> 'usUnits': '1', 'windBatteryStatus': '0', 'windchill': >>>>>>>>> '76.82000000000002', >>>>>>>>> 'windDir': 'None', 'windGust': '0.0', 'windGustDir': 'None', >>>>>>>>> 'windrun': >>>>>>>>> 'None', 'windSpeed': '0.0' >>>>>>>>> >>>>>>>>> KPSK dublin VA >>>>>>>>> >>>>>>>>> >>>>>>>>> *Current conditions at* Dublin / New River Valley (KPSK) *Lat: * >>>>>>>>> 37.13°N*Lon: *80.68°W*Elev: *2106ft. >>>>>>>>> >>>>>>>>> Mostly Cloudy >>>>>>>>> >>>>>>>>> 76°F >>>>>>>>> >>>>>>>>> 24°C >>>>>>>>> >>>>>>>>> *Humidity* >>>>>>>>> 76% >>>>>>>>> *Wind Speed* >>>>>>>>> E 7 mph >>>>>>>>> *Barometer* >>>>>>>>> 29.95 in >>>>>>>>> *Dewpoint* >>>>>>>>> 68°F (20°C) >>>>>>>>> *Visibility* >>>>>>>>> 10.00 mi >>>>>>>>> *Heat Index* >>>>>>>>> 77°F (25°C) >>>>>>>>> *Last update* >>>>>>>>> 20 Aug 6:35 pm EDT >>>>>>>>> >>>>>>>>> *More Information:* >>>>>>>>> >>>>>>>>> Local Forecast Office <https://www.weather.gov/rnk>More Local Wx >>>>>>>>> <http://forecast.weather.gov/obslocal.php?warnzone=VAZ013&local_place=2%20Miles%20N%20Dublin%20VA&zoneid=EDT&offset=14400>3 >>>>>>>>> >>>>>>>>> Day History >>>>>>>>> <http://forecast.weather.gov/data/obhistory/KPSK.html>Hourly >>>>>>>>> Weather Forecast >>>>>>>>> <https://forecast.weather.gov/MapClick.php?lat=37.1333&lon=-80.6833&unit=0&lg=english&FcstType=graphical> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Wednesday, August 20, 2025 at 6:00:53 PM UTC-4 >>>>>>>>> [email protected] wrote: >>>>>>>>> >>>>>>>>>> The three pressures on your LOOP was "altimeter", "barometer" and >>>>>>>>>> "pressure". >>>>>>>>>> If you set station altitude = 0 then you are telling your weather >>>>>>>>>> station's barometer that it is located at sea level. >>>>>>>>>> Therefore all three pressures shouldl read the same. >>>>>>>>>> >>>>>>>>>> "pressure" is just your local atmospheric pressure at your >>>>>>>>>> location's altitude.. >>>>>>>>>> "altimeter" is a sea level pressure that factors in your altitude >>>>>>>>>> above sea level and "corrects" your local pressure (station >>>>>>>>>> pressure) and >>>>>>>>>> calculates an equivalent pressure at sea level. >>>>>>>>>> "barometer" is also a sea level pressure except it factors in >>>>>>>>>> your station pressure "(pressure" in WeeWX) , local temperature and >>>>>>>>>> humidity and "corrects" it to an equivalent pressure at sea level. >>>>>>>>>> >>>>>>>>>> I took a quick look at your weather station's manual and it >>>>>>>>>> appears that your display console reads "relative pressure" only. So >>>>>>>>>> in >>>>>>>>>> your case if you set station altitude = 0 in WeeWX, WeeWX's SLP >>>>>>>>>> correction >>>>>>>>>> will calculate a correction = 0. It makes sense because you told >>>>>>>>>> WeeWX you >>>>>>>>>> are located at sea level so there is no need to correct your >>>>>>>>>> "pressure" to >>>>>>>>>> sea level - you are already at sea level! Therefore "pressure" = >>>>>>>>>> "barometer" at sea level ( altitude = 0). >>>>>>>>>> >>>>>>>>>> I am not familiar with LaCrosse barometer operations- but I'll >>>>>>>>>> try to help. Other LaCrosse owners can certainly jump in... >>>>>>>>>> >>>>>>>>>> Things to check. >>>>>>>>>> >>>>>>>>>> 1. What have you entered as your station altitude in WeeWX? Did >>>>>>>>>> you ensure that the station altitude you entered in WeeWX is the >>>>>>>>>> altitude >>>>>>>>>> of the barometric sensor (total height above sea level?) How did you >>>>>>>>>> calculate your station altitude? >>>>>>>>>> >>>>>>>>>> 2. Your weather station manual makes no mention of sea level >>>>>>>>>> pressure calculations, entering an altitude or elevation in your >>>>>>>>>> display >>>>>>>>>> console.or using an offset. The manual implies that the console only >>>>>>>>>> displays relative pressure? Can you confirm that? >>>>>>>>>> >>>>>>>>>> 3. How close are you to an official weather station at an >>>>>>>>>> airport? Can you provide the ICAO code for it? Or the name of the >>>>>>>>>> airport? >>>>>>>>>> >>>>>>>>>> 4. Your July 31 LOOP altimeter and barometer readings appear to >>>>>>>>>> be unseasonably high for typical summertime weather. >>>>>>>>>> >>>>>>>>>> 5. WeeWX is calculating altimeter correctly but WeeWX barometer >>>>>>>>>> seems high compared to the Starpath online SLP calculator using the >>>>>>>>>> same >>>>>>>>>> input parameters. WeeWX "barometer" should be close to be the same >>>>>>>>>> or less >>>>>>>>>> than "altimeter" at the temperatures you reported. >>>>>>>>>> >>>>>>>>>> 6. Does your weather station use PC software from the >>>>>>>>>> manufacturer? If so, what is it reporting currently for absolute >>>>>>>>>> pressure >>>>>>>>>> and relative pressure? Can you adjust your absolute pressure? >>>>>>>>>> >>>>>>>>>> 7. Can you do another LOOP and give us the three pressures >>>>>>>>>> (altimeter, barometer, and pressure)? >>>>>>>>>> >>>>>>>>>> At the same time you do a LOOP ,can you obtain the altimeter >>>>>>>>>> setting of a close-by airport. And finally, can you obtain the >>>>>>>>>> elevation of >>>>>>>>>> that airport. >>>>>>>>>> >>>>>>>>>> Summing up, we need: your station altitude, your weather >>>>>>>>>> station's absolute pressure, relative pressure and the current WeeWX >>>>>>>>>> LOOP >>>>>>>>>> pressure values (altimeter, barometer, and pressure) and the LOOP >>>>>>>>>> outside >>>>>>>>>> temperature. In order to make some pressure comparisons and accuracy >>>>>>>>>> checks. We would also need , the name(s) of any close-by airport(s) >>>>>>>>>> and how >>>>>>>>>> close you are to these airports. lus we need the airport altimeter >>>>>>>>>> setting >>>>>>>>>> reading and elevation. As Tom mentioned in the wiki, you have to be >>>>>>>>>> careful >>>>>>>>>> about comparing your relative pressure on your display console with >>>>>>>>>> the >>>>>>>>>> WeeWX "barometer" calculation. They could be two different things. >>>>>>>>>> >>>>>>>>>> Michael's advice is I think, correct. You probably need to >>>>>>>>>> re-calibrate or at least verify if your station pressure/absolute >>>>>>>>>> value is >>>>>>>>>> accurate. >>>>>>>>>> >>>>>>>>>> On Wednesday, August 20, 2025 at 1:33:38 AM UTC+4 >>>>>>>>>> [email protected] wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Which obs_type "reads what is on the display", when altitude is >>>>>>>>>>> set to 0? pressure, altimeter or barometer or all three? (It should >>>>>>>>>>> be all >>>>>>>>>>> three) When setting your altitude, pressure should always "read >>>>>>>>>>> what is on >>>>>>>>>>> the display", altimeter and barometer will change with the altitude >>>>>>>>>>> you >>>>>>>>>>> configure. >>>>>>>>>>> >>>>>>>>>>> You should calibrate your station to the real pressure provided >>>>>>>>>>> by a reliable station near you, which is located at the same >>>>>>>>>>> altitude. Then >>>>>>>>>>> configure the altitude of the station in weewx, then choose the >>>>>>>>>>> obs_types >>>>>>>>>>> you want to have displayed in your report. Depending on what you >>>>>>>>>>> choose, >>>>>>>>>>> the may or may not "read what is on the display", which is >>>>>>>>>>> perfectly fine >>>>>>>>>>> for altimeter and barometer. >>>>>>>>>>> kufuu schrieb am Dienstag, 19. August 2025 um 21:09:21 UTC+2: >>>>>>>>>>> >>>>>>>>>>>> If I put 0 altitude in weewx config then it reads what is on >>>>>>>>>>>> the display, is there any way to correct or just leave it 0 ? >>>>>>>>>>>> >>>>>>>>>>>> On Thursday, July 31, 2025 at 9:29:40 AM UTC-4 kufuu wrote: >>>>>>>>>>>> >>>>>>>>>>>>> It can wait till then and good luck, >>>>>>>>>>>>> >>>>>>>>>>>>> On Thursday, July 31, 2025 at 9:06:30 AM UTC-4 kufuu wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Let me redo this and put the dates in order, >>>>>>>>>>>>>> LOOP: 2025-07-31 08:45:20 EDT (1753965920) 'altimeter': >>>>>>>>>>>>>> '31.994965595814566', 'appTemp': '82.83203424777768', >>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>> '31.942483641883886', 'cloudbase': '2805.6732703464695', >>>>>>>>>>>>>> 'dateTime': >>>>>>>>>>>>>> '1753965920', 'dewpoint': '70.70103761047554', 'ET': 'None', >>>>>>>>>>>>>> 'heatindex': >>>>>>>>>>>>>> '76.113', 'humidex': '90.81599237942409', 'inDewpoint': >>>>>>>>>>>>>> '55.52280883736111', 'inHumidity': '58', 'inTemp': '71.06', >>>>>>>>>>>>>> 'inTempBatteryStatus': '0', 'maxSolarRad': '357.687499228319', >>>>>>>>>>>>>> 'outHumidity': '87', 'outTemp': '74.84', 'outTempBatteryStatus': >>>>>>>>>>>>>> '0', >>>>>>>>>>>>>> 'pressure': '29.919783335', 'rain': '0.0', 'rainBatteryStatus': >>>>>>>>>>>>>> '0', >>>>>>>>>>>>>> 'rainRate': '0.0', 'rxCheckPercent': '100', 'usUnits': '1', >>>>>>>>>>>>>> 'windBatteryStatus': '0', 'windchill': '74.84', 'windDir': >>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>> 'windGust': '0.0', 'windGustDir': 'None', 'windrun': 'None', >>>>>>>>>>>>>> 'windSpeed': >>>>>>>>>>>>>> '0.0' >>>>>>>>>>>>>> REC: 2025-07-31 08:45:00 EDT (1753965900) 'altimeter': >>>>>>>>>>>>>> '31.994965595814566', 'appTemp': '82.83203424777768', >>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>> '31.942483641883886', 'cloudbase': '2805.6732703464695', >>>>>>>>>>>>>> 'dateTime': >>>>>>>>>>>>>> '1753965900', 'dewpoint': '70.70103761047554', 'ET': 'None', >>>>>>>>>>>>>> 'heatindex': >>>>>>>>>>>>>> '76.113', 'humidex': '90.81599237942409', 'inDewpoint': >>>>>>>>>>>>>> '55.52280883736111', 'inHumidity': '58.0', 'inTemp': '71.06', >>>>>>>>>>>>>> 'inTempBatteryStatus': '0.0', 'interval': '5.0', 'maxSolarRad': >>>>>>>>>>>>>> '351.7781598061274', 'outHumidity': '87.0', 'outTemp': '74.84', >>>>>>>>>>>>>> 'outTempBatteryStatus': '0.0', 'pressure': '29.919783335', >>>>>>>>>>>>>> 'rain': '0.0', >>>>>>>>>>>>>> 'rainBatteryStatus': '0.0', 'rainRate': '0.0', 'rxCheckPercent': >>>>>>>>>>>>>> '97.5', >>>>>>>>>>>>>> 'usUnits': '1', 'windBatteryStatus': '0.0', 'windchill': >>>>>>>>>>>>>> '74.84', >>>>>>>>>>>>>> 'windDir': 'None', 'windGust': '0.0', 'windGustDir': 'None', >>>>>>>>>>>>>> 'windrun': >>>>>>>>>>>>>> '0.0', 'windSpeed': '0.0' >>>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>>> File "/usr/share/weewx/weewx/reportengine.py", line 248, in >>>>>>>>>>>>>> run >>>>>>>>>>>>>> obj.start() >>>>>>>>>>>>>> File "/usr/share/weewx/weewx/reportengine.py", line 465, in >>>>>>>>>>>>>> start >>>>>>>>>>>>>> self.run() >>>>>>>>>>>>>> File "/usr/share/weewx/weewx/reportengine.py", line 621, in >>>>>>>>>>>>>> run >>>>>>>>>>>>>> ncopy += weeutil.weeutil.deep_copy_path(path, >>>>>>>>>>>>>> html_dest_dir) >>>>>>>>>>>>>> File "/usr/share/weewx/weeutil/weeutil.py", line 1811, in >>>>>>>>>>>>>> deep_copy_path >>>>>>>>>>>>>> shutil.copy(path, d) >>>>>>>>>>>>>> File "/usr/lib/python3.9/shutil.py", line 418, in copy >>>>>>>>>>>>>> copyfile(src, dst, follow_symlinks=follow_symlinks) >>>>>>>>>>>>>> File "/usr/lib/python3.9/shutil.py", line 264, in copyfile >>>>>>>>>>>>>> with open(src, 'rb') as fsrc, open(dst, 'wb') as fdst: >>>>>>>>>>>>>> PermissionError: [Errno 13] Permission denied: >>>>>>>>>>>>>> '/var/www/html/weewx/seasons.css' >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/0590dc21-ed87-4f7f-8a1a-c073a123440fn%40googlegroups.com.
