Which obs_type "reads what is on the display", when altitude is set to 0? pressure, altimeter or barometer or all three? (It should be all three) When setting your altitude, pressure should always "read what is on the display", altimeter and barometer will change with the altitude you configure.
You should calibrate your station to the real pressure provided by a reliable station near you, which is located at the same altitude. Then configure the altitude of the station in weewx, then choose the obs_types you want to have displayed in your report. Depending on what you choose, the may or may not "read what is on the display", which is perfectly fine for altimeter and barometer. kufuu schrieb am Dienstag, 19. August 2025 um 21:09:21 UTC+2: > If I put 0 altitude in weewx config then it reads what is on the display, > is there any way to correct or just leave it 0 ? > > On Thursday, July 31, 2025 at 9:29:40 AM UTC-4 kufuu wrote: > >> It can wait till then and good luck, >> >> On Thursday, July 31, 2025 at 9:06:30 AM UTC-4 kufuu wrote: >> >>> Let me redo this and put the dates in order, >>> LOOP: 2025-07-31 08:45:20 EDT (1753965920) 'altimeter': >>> '31.994965595814566', 'appTemp': '82.83203424777768', 'barometer': >>> '31.942483641883886', 'cloudbase': '2805.6732703464695', 'dateTime': >>> '1753965920', 'dewpoint': '70.70103761047554', 'ET': 'None', 'heatindex': >>> '76.113', 'humidex': '90.81599237942409', 'inDewpoint': >>> '55.52280883736111', 'inHumidity': '58', 'inTemp': '71.06', >>> 'inTempBatteryStatus': '0', 'maxSolarRad': '357.687499228319', >>> 'outHumidity': '87', 'outTemp': '74.84', 'outTempBatteryStatus': '0', >>> 'pressure': '29.919783335', 'rain': '0.0', 'rainBatteryStatus': '0', >>> 'rainRate': '0.0', 'rxCheckPercent': '100', 'usUnits': '1', >>> 'windBatteryStatus': '0', 'windchill': '74.84', 'windDir': 'None', >>> 'windGust': '0.0', 'windGustDir': 'None', 'windrun': 'None', 'windSpeed': >>> '0.0' >>> REC: 2025-07-31 08:45:00 EDT (1753965900) 'altimeter': >>> '31.994965595814566', 'appTemp': '82.83203424777768', 'barometer': >>> '31.942483641883886', 'cloudbase': '2805.6732703464695', 'dateTime': >>> '1753965900', 'dewpoint': '70.70103761047554', 'ET': 'None', 'heatindex': >>> '76.113', 'humidex': '90.81599237942409', 'inDewpoint': >>> '55.52280883736111', 'inHumidity': '58.0', 'inTemp': '71.06', >>> 'inTempBatteryStatus': '0.0', 'interval': '5.0', 'maxSolarRad': >>> '351.7781598061274', 'outHumidity': '87.0', 'outTemp': '74.84', >>> 'outTempBatteryStatus': '0.0', 'pressure': '29.919783335', 'rain': '0.0', >>> 'rainBatteryStatus': '0.0', 'rainRate': '0.0', 'rxCheckPercent': '97.5', >>> 'usUnits': '1', 'windBatteryStatus': '0.0', 'windchill': '74.84', >>> 'windDir': 'None', 'windGust': '0.0', 'windGustDir': 'None', 'windrun': >>> '0.0', 'windSpeed': '0.0' >>> Traceback (most recent call last): >>> File "/usr/share/weewx/weewx/reportengine.py", line 248, in run >>> obj.start() >>> File "/usr/share/weewx/weewx/reportengine.py", line 465, in start >>> self.run() >>> File "/usr/share/weewx/weewx/reportengine.py", line 621, in run >>> ncopy += weeutil.weeutil.deep_copy_path(path, html_dest_dir) >>> File "/usr/share/weewx/weeutil/weeutil.py", line 1811, in >>> deep_copy_path >>> shutil.copy(path, d) >>> File "/usr/lib/python3.9/shutil.py", line 418, in copy >>> copyfile(src, dst, follow_symlinks=follow_symlinks) >>> File "/usr/lib/python3.9/shutil.py", line 264, in copyfile >>> with open(src, 'rb') as fsrc, open(dst, 'wb') as fdst: >>> PermissionError: [Errno 13] Permission denied: >>> '/var/www/html/weewx/seasons.css' >>> >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/ed6e51c5-1e45-4bdf-bcaa-8e497d0697d2n%40googlegroups.com.
