After a refresh, the error becomes:
paho-mqtt.min.js:37 WebSocket connection to
'wss://mqtt.dreamwoodestate.net:9011/mqtt' failed:
d._doConnect @ paho-mqtt.min.js:37
d.connect @ paho-mqtt.min.js:31
Client.connect @ paho-mqtt.min.js:70
connect @ belchertown.js?1754408117:1543
(anonymous) @ belchertown/:171
l @ jquery.min.js:2
c @ jquery.min.js:2
On Wednesday, 6 August 2025 at 01:35:27 UTC+10 Peter Schmelitschek wrote:
> With mqtt_websockets_ssl = 1 in the [[[Extras]]] of [[Belchertown]] in
> weewx.conf, I get 'Failed connecting to the weather station' from the
> browser using https.
> I can see the belchertown.js has updated as you pointed out, so now it's:
> belchertown_debug("MQTT: Connecting to MQTT Websockets:
> mqtt.dreamwoodestate.net 9011 (SSL Enabled)");
> var useSSL = true;
>
> client = new Paho.Client("mqtt.dreamwoodestate.net", 9011,
> mqttclient);
>
> BTW, ChatGPT told me last week that I should add a "/" in between the 9011
> and mqttclient in the client = line.
> I removed that "/" earlier tonight thinking the advice was wrong - but it
> dowsn't seem to improve the situation either way.
>
> Right now the browser shows this error from F12:
> paho-mqtt.min.js:37 WebSocket connection to 'wss://
> mqtt.dreamwoodestate.net:9011/mqtt' failed:
> d._doConnect @ paho-mqtt.min.js:37
> On Wednesday, 6 August 2025 at 00:41:41 UTC+10 Jacques Terrettaz wrote:
>
>> Your belchertown.js file (
>> https://dreamwoodinternational.com/weewx/belchertown/js/belchertown.js)
>> is explicitly trying to connect to the MQTT broker with SSL disabled.
>> See it in line 1523 of belchertown.js :
>> belchertown_debug("MQTT: Connecting to MQTT Websockets:
>> mqtt.dreamwoodestate.net 9011 (SSL Disabled)");
>> *var useSSL = false;*
>> client = new Paho.Client("mqtt.dreamwoodestate.net", 9011,
>> mqttclient);
>>
>> So double check that you have not conflicting configuration in the
>> Belchertown configuration about the use of SSL with MQTT, and verify that
>> the
>> https://dreamwoodinternational.com/weewx/belchertown/js/belchertown.js file
>> is synchronized with the one generated by the skin in your weewx VM. The
>> belchertown skin is updating the js file every time a new data record has
>> been received by weewx.
>>
>> Le 5 août 2025 à 15:35, Peter Schmelitschek <[email protected]> a
>> écrit :
>>
>>
>> Any ideas on solving this issue (from the browser's explorer)?
>>
>> paho-mqtt.min.js:37 Mixed Content: The page at
>> 'https://dreamwoodinternational.com/weewx/belchertown/?debug=true'
>> was loaded over HTTPS, but attempted to connect to the insecure WebSocket
>> endpoint 'ws://mqtt.dreamwoodestate.net:9011/mqtt'. This request has
>> been blocked; this endpoint must be available over WSS.
>> (anonymous) @ paho-mqtt.min.js:37
>> On Tuesday, 5 August 2025 at 22:22:35 UTC+10 Peter Schmelitschek wrote:
>>
>>> This seems to be the issue (from using ?debug=true in browser):
>>>
>>> MQTT: Connecting to MQTT Websockets: mqtt.dreamwoodestate.net 9011 (SSL
>>> Enabled)
>>> belchertown.js?1754396118:1579 MQTT: 2025-08-05T22:19:59+10:00: Cannot
>>> connect to MQTT broker
>>>
>>> On Tuesday, 5 August 2025 at 21:44:06 UTC+10 Peter Schmelitschek wrote:
>>>
>>>> Replies are getting out of order.
>>>> myconfig.conf - running without comments:
>>>> persistence false
>>>>
>>>>
>>>> allow_anonymous false
>>>> password_file /etc/mosquitto/passwd
>>>> acl_file /etc/mosquitto/acl
>>>>
>>>> listener 1883
>>>> listener 8883
>>>> cafile /etc/letsencrypt/live/mqtt.dreamwoodestate.net/chain.pem
>>>> certfile /etc/letsencrypt/live/mqtt.dreamwoodestate.net/cert.pem
>>>> keyfile /etc/letsencrypt/live/mqtt.dreamwoodestate.net/privkey.pem
>>>> protocol mqtt
>>>>
>>>> listener 9011
>>>> protocol websockets
>>>>
>>>> On Tuesday, 5 August 2025 at 18:37:56 UTC+10 Jacques Terrettaz wrote:
>>>>
>>>>> You have possibly a comment line (starting with "#") in the first line
>>>>> of myconfig.conf. Try to remove it and any other comment line.
>>>>>
>>>>> Here is for exemple the content of my own myconfig.conf file :
>>>>> listener 1883
>>>>> listener 8083
>>>>> protocol websockets
>>>>> allow_anonymous false
>>>>> password_file /etc/mosquitto/passwd
>>>>> acl_file /etc/mosquitto/acl
>>>>>
>>>>>
>>>>> Le 5 août 2025 à 10:14, Peter Schmelitschek <[email protected]> a
>>>>> écrit :
>>>>>
>>>>> I have recreated both ACL and myconfig.conf files from scratch using
>>>>> NANO because Mosquitto complains of unexpected character at the start of
>>>>> files.
>>>>> However, with that done, I still get this at Mosquitto restart:
>>>>> Loading config file /etc/mosquitto/conf.d/myconfig.conf
>>>>> Error: Unknown configuration variable "#"
>>>>> Error found at /etc/mosquitto/conf.d/myconfig.conf:1
>>>>> Error found at /etc/mosquitto/mosquitto.conf:18
>>>>>
>>>>> This is possibly the root cause of my MQTT problems - I have been
>>>>> commenting out the ACL file previously to get WeeWx to appear at this
>>>>> stage.
>>>>> Right now I'm seeing "Failed connecting to the weather station"
>>>>>
>>>>>
>>>>>
>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/weewx-user/Gq6uNw_Cxss/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> [email protected].
>>
>> To view this discussion visit
>> https://groups.google.com/d/msgid/weewx-user/8e9656f2-23b7-47ec-8b1d-cbfe1083ae39n%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/8e9656f2-23b7-47ec-8b1d-cbfe1083ae39n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/bd8abc73-727d-4f3e-adbc-35c65dcc9e3cn%40googlegroups.com.
