Well, finally, it works - mostly. After I got the GW3001 I managed to get it into producing data. Interestingly it did connect to my Froggit DP1500 as well. I then did dactivate all unused sensors there. So, I think, that could use this GW1000 clone for both arrays.
Then I introduced the GW3000 into weewx as a service - and did not see any data. I then changed both drivers, with GW1000 as service - with all data from GW3000 but none from GW1000. I switched back and replaced the GW3000 service by @Ian ecowitt-http driver. The log showed the activation, I could even see catchup, but no data. Long story short result: I always missed to establish a field map for the service stanzas. Silly me! I should have known that in case of running as a service, a field map is mandatory, because this was one of my strategies for „silencing“ certain fields, such as the indoor temperature and wind of GW3000. Both are not representative. So I finally went back to the most conservative setup and user GW1000 as GW1000driver and GW3000 as GW1000Service. I maybe will replace GW3000service by Ecowitt-httpService, as I know, that it will work. But, currently, the only advantage would be the use of catchup. So, I ended up with weewx using data of both sources. I additionally found a lot of help using the examples in @Werner github driver and comparison of his custom driver and the new http driver. What still is open to be solved: I use alltimeSeansos skin, which is a clone of the most recent Seasons skin. I tried to add the new piezo rain plots, besides that of tipping sensor rain, which was „build in“. I did non succeed. I had a look into the www/html/weewx directory and found, that the png files were there. But they did not show in the web site. My quick and dirty solution was to rename the stanza contining both sensors in the skin.config into that, which is shown on the web page. Now, I see both rain results as adjacent columns. Fine. But, why does Seasons not show the other plots? I had a look into the „logic“ of index.html.tmpl, where there is a group, containing „rain“, that should be displayed for day, week, month, year, if present, so far I can understand. But although there are files like dayrain.png and dayrain_t.png and dayrain_p.png, only dayrain.png is imported into index.html. For now, my quick and dirty solution satisfies my interest. But maybe someone can enlighten me, how to deal with this structure. Thanks Peter DrVet52 schrieb am Samstag, 12. Juli 2025 um 21:14:11 UTC+2: > Glenn McKechnie <[email protected]> schrieb am Sa., 12. Juli 2025, > 05:07: > >> Weewx does all the calculations, AlltimeSeasons takes them from the NOAA >> tables. >> >> If there is an entry in the files in the NOAA directory (for a 2nd rain >> gauge there won't be), those daily summaries are correctly generated (no >> extreme errors in data) then half the work is done. Editing the NOAA >> templates is interesting, but quite do-able. >> >> It then relies on the alltimes skin.conf and the historygenerator.inc >> page having a definition for those daily summaries. With that done, they >> can be displayed. >> That is all reasonably straightforward. YMMV. >> >> You're talking serious magic to select the "better" sensor and display it >> accordingly. Ditto with the mean. It could be done, but you're on your own >> there. >> Far easier to include both rain gauge types in the displayed data. IMHO >> that is more informative too as you'll see the differences as they happen, >> know which one has gone offline or started pulling its stats from mercury. >> >> I have 2 rain gauges. My allTimeSeason stats page displays them both. >> >> I do have an unreleased, tweaked version which installs as a separate >> skin, but is ultimately incorporated into the Seasons skin via the >> index.html page. >> It's in an unfinished state, and you would need to parse what I've done >> and troubleshoot as you go. I'll obviously help but you'll need to do some >> hard yards too. >> >> Contact me off-list and I'll send it, as time becomes available (mainly >> me) we should be able to get it working for a 2nd rain gauge. >> >> My email address is in the install.py file. >> >> Cheers >> Glenn >> >> Various WeeWx addons at >> https://github.com/glennmckechnie >> >> >> >> On Sat, 12 Jul 2025 at 01:48, DrVet52 <[email protected]> wrote: >> >>> Thanks, Glenn! I am glad with AlltimeSeasons, as is now. Nicht to see, >>> that is now installable, and does not need to be installed manually. >>> Although, when manually installed, it was necessary to have a look into the >>> diff files, which gateway e good feeling, what was changed compared to >>> standard Seasons skin. >>> So, I think, that you know about the mechanisms of summarizing rain >>> data. I think, it is a better approach to do this calculations in weewx, >>> and not in alltimeSeasons. Because, it would be important, not to sum up >>> the same rain from different sensors, but either chose one ( preferably the >>> "better" sensor ), or, if ther is no bias, calculate sort of statistical >>> mean value of the sensor data. In case of piezo vs tipping sensor, I tend >>> to a biased version: when tipping gives no data, take that of Piezo, >>> otherwise that of the tipping bucket. >>> What is your opinion? >>> >>> Glenn McKechnie <[email protected]> schrieb am Fr., 11. Juli 2025, >>> 01:42: >>> >>>> >>>> >>>> On Thu, 10 Jul 2025 at 23:03, Vetti52 <[email protected]> wrote: >>>> [...] >>>> >>>> >>>>> And, second, I would like to see the this sum in the allTime table ( >>>>> https://github.com/glennmckechnie/alltimeSeasons), I have integrated >>>>> into my Season skin. As far as I can look into it, this is a small >>>>> version of the fuzzy-archer skin, Michael has used, right >>>> >>>> >>>> It's a fork of gedgers repo >>>> https://github.com/gedger/alltimeSeasons/ >>>> which (in its first release in 2020) attributes >>>> https://github.com/brewster76/fuzzy-archer >>>> >>>> Yes, It's a simpler version and because of that origin timing it won't >>>> have any of the extras that the latest version of fuzzy-archer may have / >>>> has added. >>>> >>>> I added an extra totals column, changed some colors, then packaged it >>>> as an installable skin (per weewx style), and that's about it. >>>> Anything else would need to be adapted from the current fuzzy-archer >>>> and incorporated into it, or a new fork. >>>> >>>> >>>> Cheers >>>> Glenn >>>> >>>> Various WeeWx addons at >>>> https://github.com/glennmckechnie >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-user" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/weewx-user/rwdy_SwGW8o/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> To view this discussion visit >>>> https://groups.google.com/d/msgid/weewx-user/CAAraAzgLusKPepML6VWPiu1O2a5FPm5X-AsbPA7jALevp0V87A%40mail.gmail.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/CAAraAzgLusKPepML6VWPiu1O2a5FPm5X-AsbPA7jALevp0V87A%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion visit >>> https://groups.google.com/d/msgid/weewx-user/CAO%3D2E3ktpNVSTM0Ee9uXxF7Ygysc%3DBBWbYPJO3fe8hp9J635OQ%40mail.gmail.com >>> >>> <https://groups.google.com/d/msgid/weewx-user/CAO%3D2E3ktpNVSTM0Ee9uXxF7Ygysc%3DBBWbYPJO3fe8hp9J635OQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/rwdy_SwGW8o/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> > To view this discussion visit >> https://groups.google.com/d/msgid/weewx-user/CAAraAzgE%3DuhAZ-iS%3D4TswJcMwefCHqkBSfQ%3D1%3D%3DuoVR1VxF6fA%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/weewx-user/CAAraAzgE%3DuhAZ-iS%3D4TswJcMwefCHqkBSfQ%3D1%3D%3DuoVR1VxF6fA%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/41660165-53ea-416d-a5b0-3b7eabef0d2an%40googlegroups.com.
