Thanks. I can only tell you what worked for me. When I did install or install --user without the -break it would not install even in a venv.
As to rsync, unfortunately, the server I use will ONLY accept ssh sftp. In fact, I don't blame him...I used to have httpd as the web server daemon on my Pi and just opening that one port got be all kinds of unwanted attention from around the world. On Monday, July 14, 2025 at 3:54:02 PM UTC-4 Burns Fisher wrote: > I just got this working and thought it might be useful to pass on some > hints collected together here. > > FIrst, REALLY do use a python virtual environment. It will save much > grief later. The instructions for installing weewx under a venv are in the > docs: https://weewx.com/docs/5.1/quickstarts/pip/?h=virtual+environment > > Now install pysftp. This package is a bit old and lots of net searches > tell you to use something else, but it works fine once you get it in. The > key is that on the latest Raspbian you need to install this in a virtual > environment. You can't install stuff system wide (without really knowing > what you are doing). You do this by > > - be sure the virtual environment is activated in your terminal process. > (The prompt will start (weewx-venv). > -pip install --user --break-system-packages pysftp > (Don't be scared of "break system packages" if you also say -user. If > you don't say -user, this overrides the checks and installs it system > wide. It may be fine, but not recommended) > > -feel free to let it start and make sure it is working, setting up the > database, etc. If you have an old database from a previous incarnation you > can just drop it in the right place, assuming it is not corrupted. > > - stop weewx using the command 'systemctl stop weewx' > > - Now install weewx-sftp. The readme in > https://github.com/matthewwall/weewx-sftp is a bit out of date, as are a > couple other things. Get the zip file as the readme says, but then the > correct command to install it on these newer versions is > weectl extension install weewx-sftp.zip > -DO NOT start weewx back up yet. First you will find some stuff in > sftp.py that does not work on the latest of everything. sftp.py is in > ~/weew-data/bbin/user assuming you did everything based on your login > directory. Edit it, and everywhere you see cPickle (or maybe cpickle) > change it to just pickle. This requirement must have been fairly recent > since Matthew Wall did a checkin that was supposed to make this work for > Pip V3. > -Change the [SFTP] username, password, and destination directory to where > you want it to be. > - restart weewx using 'systemctl start weewx' > If there is a problem, you can look at error messages using > > journalctl -e (the last page or so of the log) or > journalctl -n 100 (number of your choice...show the last 100 lines of the > log) > > ============================== > I hope this will help someone. Honestly, there is nothing here that is > not likely to be somewhere else, but I thought it would be nice to put it > all together. BTW, I used ChatGPT to help figure out some of this stuff. > It was not always right, but usually pointed me in the right direction. > And surprisingly it knows a lot about weewx! > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/fb704ac0-05af-43cd-8747-62638315ab7en%40googlegroups.com.
