In the absence of logs, we can't help you. Best of luck. On Saturday, May 17, 2025 at 10:54:07 AM UTC-7 P Black wrote:
> Vince, > > I restarted weewx but after connecting the Vantage to the usb port on the > pi. Looking at the output of journalctl -f, I saw much weewx activity > related to the Vantage. The webpage was encouraging but still listed the > station as the Simulator. Playing around a little (stop, start, etc) I saw > one USB0 error in red, but that was just once and saw it identified the > extended data set tables. After letting it run awhile, the webpage changed > to note it was now Hardware Vantage Pro2 and the data curves were getting > to be correct. The outside temperature and dew point is not updating yet > for the daily chart but appears to be working for the weekly. After running > for awhile a new graph appeared showing the 2 extended temperature > sensors (very nice...no work on my part). > > I will leave it alone to see what finally happens. The data file I ported > over goes back to 2011. > > Stay healthy, > Pat > > On Friday, May 16, 2025 at 5:08:15 PM UTC-4 vince wrote: > >> Set debug=1 in weewx.conf, restart weewx, and examine your syslog to >> verify weewx is indeed running and using the vantage driver. >> >> >> On Friday, May 16, 2025 at 1:16:26 PM UTC-7 P Black wrote: >> >>> Hi, >>> >>> I am finally moving from wview to weewx and want to make sure that I am >>> doing it correctly...and...easily. >>> >>> station: VantagePro2 >>> computer: old---raspberry pi 3 running wview with extended sensors >>> (using a couple extra thermocouples) >>> new: raspberry pi 5 (addon battery powered RTC) running weewx 5.1 >>> >>> So far: >>> 1) installed weewx 5.1 and have it running using the simulator >>> 2) config for Vantage making sure to use SI units and USB0 >>> 3)copied wview database to /var/lib/weewx and rename to weewx.sdb then >>> sudo chown weewx:weewx weewx.sdb >>> 4) tried a simple running with 2) and 3) but only the simulator shows on >>> webpage >>> >>> Seek advice: >>> >>> 1) what steps should be done next? >>> 2) will the extended data field from wview be populated by weewx or do I >>> need to explicitly set something for that to happen? >>> 3) I assume that I will have to add a couple graphs to display the extra >>> 2 temperature data sets. >>> 4) what problems ...no challenges... do I have yet to fix? >>> >>> Stay healthy, >>> Pat >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/b583a199-b698-41d0-a286-e484c2c474c9n%40googlegroups.com.
