That driver was written for python2.x and that's long gone now. It was never upgraded but there is a fork of it that was rejigged to use Python3.x and tweaked for the weewx 4.x versions. It relies on the module python3-six (that's available in Debian 12)
https://github.com/chaunceygardiner/weewx-ip100 Try that one, It may work as is with weewx 5.1, probably should work for weewx 4.x. Forget about 3.6, you'll get lost if you go down that path. Cheers Glenn Various WeeWx addons at https://github.com/glennmckechnie On Mon, 10 Feb 2025 at 11:41, kenwoodts850 via weewx-user < weewx-user@googlegroups.com> wrote: > I originally posted this in the Reddit/weewx area where it was suggested > that here would be a better place to post. Rather than compose a new post, > I used "cut and paste" so if you reading this for a second time, my > apologies. Also. since I am posting this from an email account rather > than the group web page, I have no idea if the fomatting will carry > through. If it is hard to read, reading it on Reddit might be easier. > Thanks. > > > I am trying to make weewx work with a Rainwise IP-100. I have tried > several different ways using the weewx-ip100 driver created by Matthew Wall > on GitHub. I first tried following the readme file that was part of the > IP100 driver package, but it didn’t take me long to discover that the > commands used there were based on a much older version of weewx than the > version 5.1 I installed. > > I next tried the instructions provided in the weewx 5.1 documentation > rather than those that accompanied the driver package. I first installed > weewx 5.1 and assumed that it did install correctly as I was able to bring > up a web page based on the simulator using a PC. I next installed the IP100 > driver using: > > weectl extension install weewx-ip100-master.zip > > and confirmed it was installed using the command: > > weectl extension list > > which resulted in: > > ip100 0.4 Capture weather data from Rainwise IP-100 > > I then tried to link them using the command: > > weectl station reconfigure --no-prompt --driver=user.ip100 > > and it resulted in the following: > > Using configuration file /etc/weewx/weewx.conf > Processing configuration file /etc/weewx/weewx.conf > Traceback (most recent call last): > File "/usr/share/weewx/weectl.py", line 75, in <module> > main() > File "/usr/share/weewx/weectl.py", line 67, in main > namespace.func(namespace) > File "/usr/share/weewx/weectllib/__init__.py", line 90, in dispatch > namespace.action_func(config_dict, namespace) > File "/usr/share/weewx/weectllib/station_cmd.py", line 311, in > reconfigure_station > weectllib.station_actions.station_reconfigure(config_dict=config_dict, > File "/usr/share/weewx/weectllib/station_actions.py", line 164, in > station_reconfigure > config_config(config_dict, > File "/usr/share/weewx/weectllib/station_actions.py", line 207, in > config_config > config_driver(config_dict, driver=driver, no_prompt=no_prompt) > File "/usr/share/weewx/weectllib/station_actions.py", line 424, in > config_driver > driver_editor, driver_name, driver_version = > weecfg.load_driver_editor(final_driver) > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > File "/usr/share/weewx/weecfg/__init__.py", line 452, in load_driver_editor > driver_module = importlib.import_module(driver_module_name) > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > File "/usr/lib/python3.11/importlib/__init__.py", line 126, in import_module > return _bootstrap._gcd_import(name[level:], package, level) > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > File "<frozen importlib._bootstrap>", line 1206, in _gcd_import > File "<frozen importlib._bootstrap>", line 1178, in _find_and_load > File "<frozen importlib._bootstrap>", line 1149, in _find_and_load_unlocked > File "<frozen importlib._bootstrap>", line 690, in _load_unlocked > File "<frozen importlib._bootstrap_external>", line 936, in exec_module > File "<frozen importlib._bootstrap_external>", line 1074, in get_code > File "<frozen importlib._bootstrap_external>", line 1004, in source_to_code > File "<frozen importlib._bootstrap>", line 241, in _call_with_frames_removed > File "/etc/weewx/bin/user/ip100.py", line 84 > print packet > ^^^^^^^^^^^^ > SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...) > > The only line that I thought I could address was the last line which > seemed to be the reason for the early exit. Based on that, I edited the > "/etc/weewx/bin/user/ip100.py” file to add the parentheses on line 84. I > then ran it again only to find a similar error further down. I didn’t keep > count, but I suspect there were about a dozen such errors in all. As I > reached the end of the file, I was hopeful for success, but after the last > error about parentheses was fixed, I had the following last lines > > File "/etc/weewx/bin/user/ip100.py", line 9, in <module> Import urllib2 > ModulesNotFoundError: No module named ‘urllib2’ > > I figured I reached a dead end at that point since my programming skills > are limited to a working occasionally with bash scripts. > > I next tried version python-weewx_4.0.0-1_all.deb, the latest standard > release, and version weewx_3.6.0-1_all.deb, the release from about the same > time the driver was released, and they both resulted in failure with > messages like those below from the oldest version. > > apt install /home/user/weewx_3.6.0-1_all.deb > Reading package lists... Done > Building dependency tree... Done > Reading state information... Done > Note, selecting 'weewx' instead of '/home/user/weewx_3.6.0-1_all.deb' > Some packages could not be installed. This may mean that you have > requested an impossible situation or if you are using the unstable > distribution that some required packages have not yet been created > or been moved out of Incoming. > The following information may help to resolve the situation: > > The following packages have unmet dependencies: > weewx : Depends: python (>= 2.5) but it is not installable > Depends: python-configobj (>= 4.5) but it is not installable > Depends: python-cheetah (>= 2.0) but it is not installable > Depends: python-imaging (>= 1.1.6) but it is not installable > Depends: python-serial (>= 2.3) but it is not installable > Depends: python-usb (>= 0.4) but it is not installable > Recommends: python-dev (>= 2.5) but it is not installable > Recommends: python-pip (>= 0.7) but it is not installable > Recommends: apache2 but it is not going to be installed > Recommends: ftp > E: Unable to correct problems, you have held broken packages. > > I recently acquired the IP-100 when there were no suggestions made in > response to a post I made here on how to make my older CC-2000 work with > weewx several months ago. I made my decision on the IP-100 based on the > fact there was a IP-100 driver available for weewx, so I am hoping there is > something I am doing wrong, or at least someone will have a suggestion on > how to modify what I am doing to make the IP-100 work with one of the > versions, hopefully 5.1. Otherwise I am now going to have two devices that > won’t work with weewx. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/weewx-user/trinity-1b8dffd1-0c4c-4750-810f-4051fa45bce0-1739138009892%403c-app-mailcom-bs14 > <https://groups.google.com/d/msgid/weewx-user/trinity-1b8dffd1-0c4c-4750-810f-4051fa45bce0-1739138009892%403c-app-mailcom-bs14?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/CAAraAzjT3a7pCk-Y2neG5KwuqrPodzfG%2BCXEW1xqcbrTO%2BneqA%40mail.gmail.com.
