Then you need to fill the affected column of the archive table, which isn't possible to do correctly. Depending on the obs_type, you might find a way that would fit your need, but it might have drawbacks. Particulary for rain: if you have the daily rain sum of 30mm, you could manually insert 30mm for any archive value in the rain column, which gives you the correct sum for that day after you rebuild that day, but a insanely high rainRate, if you recalculate derived values. You can distribute the rain over different archive intervals, which is also not correct but would also lead to the correct sum and a wrong rainRate, but this wrong rainRate might be acceptable for you, because it might be below your max rainRate for that month/year/alltime, that you might want to show in a historical summary.
Any way you do it, it won't be correct, you will have to find your individual solution with the most acceptable drawbacks. mihec schrieb am Sonntag, 2. Februar 2025 um 08:05:44 UTC+1: > Hi, thank you for your quick answer. > I understood the rebuild-daily is my last step. However, my difficulty is > in the first step - how to enter the corrected values to the database so > they won't be overridden in the future. As I said, I don't have raw > (minute) data but only daily totals. > Thanks! > > sobota, 1. februar 2025 ob 21:57:00 UTC+1 je oseba michael.k...@gmx.at > napisala: > >> >> https://weewx.com/docs/5.1/utilities/weectl-database/?h=wee+database#rebuild-the-daily-summaries >> >> And don't forget to delete existing NOAA files, as they won't be updated >> if they exist. >> >> mihec schrieb am Samstag, 1. Februar 2025 um 19:50:31 UTC+1: >> >>> Hello, >>> my Davis station has occasional issues with rain measurement lately. I >>> do have data from manual measurements (daily totals). >>> Is it possible to fix the daily totals in the weewx database so I >>> replace the wrong values with my manual measurements? If yes, any hint how >>> to do it properly so the values will update also in the NOAA reports? >>> This is only temporary until I have the hardware issue fixed. >>> >>> Thank you. >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/20283003-84e9-4aca-894b-a53dba1278f1n%40googlegroups.com.
