See: https://weewx.com/docs/5.1/reference/weewx-options/stdcalibrate/?h=stdcalibrate#corrections
michael.k...@gmx.at schrieb am Mittwoch, 15. Januar 2025 um 18:47:38 UTC+1: > Yes it is. I have a station with two Anemometers and I mix them in the > way, that always the higher windSpeed/windGust will be used, if both are > there, or the one that's there. Anemometers freeze or sometime I have > Signal strength issues. I always take the direction of a specific one (an > ultrasonic with heating, that won't freeze), except it isn't there. It's > quite a brainf*ck, but it works. Some other Corrections are also done: > > [StdCalibrate] > > [[Corrections]] > > radiation = luminosity/126.7 if luminosity is not None else None > #gw1000 fix > lightning_distance = lightning_distance if lightning_strike_count > > 0 else None > windSpeed = ws90_windSpeed if 'windSpeed' not in locals() else > windSpeed if 'ws90_windSpeed' not in locals() else ws90_windSpeed if > ws90_windSpeed > windSpeed else windSpeed > windGust = ws90_windGust if 'windGust' not in locals() else > windGust if 'ws90_windGust' not in locals() else ws90_windGust if > ws90_windGust > windGust else windGust > windDir = ws90_windDir if 'ws90_windDir' in locals() and > ws90_windDir is not None else windDir > > > > Rory Gillies schrieb am Mittwoch, 15. Januar 2025 um 17:53:42 UTC+1: > >> I know I could just try this but interested to hear if it would work, or >> if I have any other options. WeeWX 5.1. >> >> Is it possible to use logic in StdCalibrate in weewx.con? Something like >> this: >> >> [StdCalibrate] >> if windSpeed == 0 windspeed = windspeed + 15 >> if windDir == NULL windDir = windDir + 235 >> >> The reason is I have a dying anemometer and it's going to take a couple >> of weeks to get a replacement installed (it's on my chimney 8m above the >> ground). When the wind blows from SSW to WSW above 20mph it sometimes drops >> to zero every few loop packets (other times it is perfect). >> >> [image: Screenshot 2025-01-15 at 16.49.12.png] >> >> I know the observations will be technically incorrect but better than no >> wind at all! >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/bf70fd1d-3f00-45c2-82d4-32db1658e49dn%40googlegroups.com.
