try "sudo ss -tupl" which should show which process is using port 1883....
On Wednesday, August 7, 2024 at 7:49:16 PM UTC-7 M&M wrote: > Thanks for looking into this for me. I feel like I've read a bunch of > pages and that I'm really close to this. I've attached my weewx.conf, > mosquitto.conf, and local.conf (located at /etc/mosquitto/conf.d/). > > Looking at the mosquitto log file, I'm seeing this error a ton of times: > > 1722824003: mosquitto version 2.0.11 starting > 1722824003: Config loaded from /etc/mosquitto/mosquitto.conf. > 1722824003: Opening websockets listen socket on port 9001. > 1722824003: Opening ipv4 listen socket on port 1883. > 1722824003: Opening ipv6 listen socket on port 1883. > 1722824003: Opening ipv4 listen socket on port 1883. > 1722824003: Error: Address already in use > > Although ps -ef is only showing one mosquitto running which I see the > service running with systemctl. > > On Monday, August 5, 2024 at 9:04:15 PM UTC-4 vince wrote: > >> Can't help without seeing your current mosquitto config file and your >> weewx.conf file at a minimum. Remember you need to restart weewx after >> making weewx.conf changes and that your mosquitto broker is running and >> accepting incoming traffic into the ip address you are trying to talk to. >> >> You might check your mosquitto broker's logfile too to see if anything >> there is being logged that might help. >> >> On Sunday, August 4, 2024 at 8:12:53 PM UTC-7 M&M wrote: >> >>> Vince, I followed that link and I'm making some progress. Thank you. I >>> now get the message on my local page: >>> >>> >>> Connected. Waiting for data. Last Updated 4 August 2024, 23:00:00 >>> >>> I've been reading over some threads of people having the same issue but >>> those fixes are not working for me. Thoughts? >>> >>> On Friday, August 2, 2024 at 4:01:58 PM UTC-4 Stefanos Kalaitzis wrote: >>> >>>> >>>> Try this in weewx.conf :** but be careful with the unit_system >>>> [[MQTT]] >>>> topic = your_topic >>>> unit_system = METRICWX >>>> binding = loop >>>> aggregation = aggregate >>>> log_success = false >>>> log_failure = true >>>> server_url = mqtt://broker.hivemq.com:1883 >>>> >>>> [[[inputs]]] >>>> [[[[windSpeed]]]] >>>> units = km_per_hour >>>> [[[[windGust]]]] >>>> units = km_per_hour >>>> >>>> In belchertown stanza : >>>> >>>> >>>> #--- MQTT Websockets (for Real Time Streaming) Options --- >>>> mqtt_websockets_enabled = 1 >>>> >>>> mqtt_websockets_host = broker.hivemq.com >>>> mqtt_websockets_port = 8884 >>>> mqtt_websockets_ssl = 1 >>>> mqtt_websockets_topic = yourtopic/loop >>>> # disconnect_live_website_visitor = 1800000 >>>> >>>> **Change only the topic and the unit system you are using. Because i am >>>> writing from mobile please forgive me if something is strange to your eyes. >>>> >>>> Στις Παρ 2 Αυγ 2024, 21:42 ο χρήστης vince <vince...@gmail.com> έγραψε: >>>> >>>>> You're probably overthinking. It's really very simple. You don't >>>>> need SSL if you're just going to run on your LAN. You likely don't even >>>>> need to password protect it either if you are LAN only. >>>>> >>>>> See the example starting at line 72 of >>>>> https://github.com/vinceskahan/weewx-odds-and-ends/blob/master/install-belchertown-websockets >>>>> >>>>> for the minimal mosquitto MQTT server setup that works for me. >>>>> >>>>> On Friday, August 2, 2024 at 10:56:59 AM UTC-7 M&M wrote: >>>>> >>>>>> I've read a bunch about MQTT, Belchertown, and Weewx so I thought I >>>>>> would able to get this working. From the pages I read on github and >>>>>> such, >>>>>> it didn't seem like it took a lot of configuration to mosquitto to get >>>>>> it >>>>>> working. From the links I posted above that I followed, it didn't seem >>>>>> that I needed to have SSL certs working yet to get it working locally. >>>>>> I >>>>>> figured I would do that first before venturing out to get this working >>>>>> on a >>>>>> website. So I'll go back and see what I can configure to get the certs >>>>>> added to my conf files. >>>>>> >>>>>> Do you have any websites that you suggest to use to get this >>>>>> working? I feel like I'm close. >>>>>> >>>>>> On Friday, August 2, 2024 at 8:41:28 AM UTC-4 gary....@gmail.com >>>>>> wrote: >>>>>> >>>>>>> I see you haven't done much research. >>>>>>> If you want to understand this and get the Belchertown skin to work, >>>>>>> you need to do some. >>>>>>> A default mosquitto.conf isn't going to work as you want. >>>>>>> You will likely need SSL certs in order to have websockets work via >>>>>>> the internet vs local LAN. >>>>>>> You should have writing to mosquitto password protected, but >>>>>>> allow anonymous reading. >>>>>>> >>>>>>> When MQTT/Websockets works, it is great. Getting there requires a >>>>>>> passing familiarity with the care and feeding of mosquitto. >>>>>>> >>>>>>> On Thursday, August 1, 2024 at 11:38:28 PM UTC-4 M&M wrote: >>>>>>> >>>>>>>> Where can I find out if I have acl? >>>>>>>> >>>>>>>> My mosquitto.conf file looks a bit different. I didn't change any >>>>>>>> of it after it was installed besides the two listener lines. It looks >>>>>>>> like >>>>>>>> this: >>>>>>>> >>>>>>>> pi@raspberrypi:~ $ more /etc/mosquitto/mosquitto.conf >>>>>>>> # Place your local configuration in /etc/mosquitto/conf.d/ >>>>>>>> # >>>>>>>> # A full description of the configuration file is at >>>>>>>> # /usr/share/doc/mosquitto/examples/mosquitto.conf.example >>>>>>>> >>>>>>>> pid_file /run/mosquitto/mosquitto.pid >>>>>>>> >>>>>>>> persistence true >>>>>>>> persistence_location /var/lib/mosquitto/ >>>>>>>> >>>>>>>> log_dest file /var/log/mosquitto/mosquitto.log >>>>>>>> >>>>>>>> include_dir /etc/mosquitto/conf.d >>>>>>>> >>>>>>>> listener 1883 >>>>>>>> listener 9001 >>>>>>>> protocol websockets >>>>>>>> >>>>>>>> On Thursday, August 1, 2024 at 9:38:48 AM UTC-4 gary....@gmail.com >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Do you have an acl and does it resemble this? >>>>>>>>> # Allow anonymous access to the sys >>>>>>>>> topic read $SYS/# >>>>>>>>> >>>>>>>>> # Allow anonymous to read weather >>>>>>>>> topic read weather/# >>>>>>>>> topic read tester/# >>>>>>>>> >>>>>>>>> # weewx readwrite to the loop >>>>>>>>> user weewx >>>>>>>>> topic weather/# >>>>>>>>> topic tester/# >>>>>>>>> >>>>>>>>> Did you create a password for the weewx user (not the linux user, >>>>>>>>> the mqtt user)? >>>>>>>>> >>>>>>>>> Does your mosquitto conf file resemble this? >>>>>>>>> persistence false >>>>>>>>> allow_anonymous true >>>>>>>>> password_file /etc/mosquitto/pwfile >>>>>>>>> acl_file /etc/mosquitto/acl >>>>>>>>> # Insecure mqtt to localhost only, and secure mqtt >>>>>>>>> listener 1883 >>>>>>>>> listener 8883 >>>>>>>>> certfile /etc/mosquitto/certs/cert.pem >>>>>>>>> cafile /etc/mosquitto/certs/chain.pem >>>>>>>>> keyfile /etc/mosquitto/certs/privkey.pem >>>>>>>>> protocol mqtt >>>>>>>>> >>>>>>>>> # websockets >>>>>>>>> listener 8080 >>>>>>>>> certfile /etc/mosquitto/certs/cert.pem >>>>>>>>> cafile /etc/mosquitto/certs/chain.pem >>>>>>>>> keyfile /etc/mosquitto/certs/privkey.pem >>>>>>>>> protocol websockets >>>>>>>>> On Wednesday, July 31, 2024 at 11:47:46 PM UTC-4 M&M wrote: >>>>>>>>> >>>>>>>>>> I checked mosquitto.conf and it has "listener 1883" in it. I >>>>>>>>>> also disabled my pihole and checked that my raspberry pi is >>>>>>>>>> listening on >>>>>>>>>> port 1883. >>>>>>>>>> >>>>>>>>>> On Friday, July 26, 2024 at 11:23:25 PM UTC-4 M&M wrote: >>>>>>>>>> >>>>>>>>>>> I checked journalctl and now I'm seeing this error: >>>>>>>>>>> >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd[1141]: ERROR >>>>>>>>>>> user.ambientweatherapi: AmbientAPI get_devices() returned empty dict >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd.py[1141]: ambientweatherapi >>>>>>>>>>> driver encountered an error. >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd[1141]: ERROR >>>>>>>>>>> user.ambientweatherapi: ambientweatherapi driver encountered an >>>>>>>>>>> error. >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd.py[1141]: Error caught was: >>>>>>>>>>> AmbientAPI get_devices() returned empty dict >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd[1141]: ERROR >>>>>>>>>>> user.ambientweatherapi: Error caught was: AmbientAPI get_devices() >>>>>>>>>>> returned >>>>>>>>>>> empty dict >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd.py[1141]: ambientweatherapi >>>>>>>>>>> driver had an error sending data to weewx. >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd[1141]: ERROR >>>>>>>>>>> user.ambientweatherapi: ambientweatherapi driver had an error >>>>>>>>>>> sending data >>>>>>>>>>> to weewx. >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd.py[1141]: Error caught was: >>>>>>>>>>> Previous error occured, skipping packet build. >>>>>>>>>>> Jul 26 23:16:30 raspberrypi weewxd[1141]: ERROR >>>>>>>>>>> user.ambientweatherapi: Error caught was: Previous error occured, >>>>>>>>>>> skipping >>>>>>>>>>> packet build. >>>>>>>>>>> >>>>>>>>>>> On Friday, July 26, 2024 at 11:20:51 PM UTC-4 M&M wrote: >>>>>>>>>>> >>>>>>>>>>>> Making some progress. I am back to having weewx running and I >>>>>>>>>>>> now have mosquito running as well. I was able to test that >>>>>>>>>>>> service by >>>>>>>>>>>> mosquitto_sub and mosquitto_pub which worked by sending "hello >>>>>>>>>>>> world". >>>>>>>>>>>> However when I check my local Belchertown page, it now says this >>>>>>>>>>>> at the top: >>>>>>>>>>>> >>>>>>>>>>>> Failed connecting to the weather station. Please try again >>>>>>>>>>>> later! Last Updated 26 July 2024, 23:10:00 >>>>>>>>>>>> >>>>>>>>>>>> On Friday, July 26, 2024 at 2:02:17 PM UTC-4 M&M wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Oh thats right! I edited the /etc/default/locales file. I >>>>>>>>>>>>> changed it from en_GB.UTF-8 to en_US.UTF-8 since I was trying to >>>>>>>>>>>>> fix the >>>>>>>>>>>>> time in Belchertown skin to show a 12h time format. I believe I >>>>>>>>>>>>> fixed it >>>>>>>>>>>>> and for some reason, i decided to edit the locales file. I'll >>>>>>>>>>>>> change that >>>>>>>>>>>>> back when I get to that system. >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks. I believe that is what will fix it. >>>>>>>>>>>>> >>>>>>>>>>>>> On Friday, July 26, 2024 at 12:17:42 PM UTC-4 vince wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> https://stackoverflow.com/questions/14547631/python-locale-error-unsupported-locale-settling >>>>>>>>>>>>>> >>>>>>>>>>>>>> Have you messed with system locale at the os level or edited >>>>>>>>>>>>>> it in some weewx or mqtt config file ? There have been some >>>>>>>>>>>>>> skeletal >>>>>>>>>>>>>> reports about this over the years but I've never really >>>>>>>>>>>>>> understood the >>>>>>>>>>>>>> explanations. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Friday, July 26, 2024 at 3:41:42 AM UTC-7 Mark Jenks wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Make sure MQTT is running correctly. You can test it via >>>>>>>>>>>>>>> CLI. This page goes into configuring a cert, you can stop >>>>>>>>>>>>>>> reading at >>>>>>>>>>>>>>> that point. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> https://medium.com/gravio-edge-iot-platform/how-to-set-up-a-mosquitto-mqtt-broker-securely-using-client-certificates-82b2aaaef9c8 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thursday, July 25, 2024 at 10:27:54 PM UTC-5 M&M wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Also I tried commenting out all of the MQTT lines in >>>>>>>>>>>>>>>> weewx.conf so that I could get the service running again but >>>>>>>>>>>>>>>> it isn't >>>>>>>>>>>>>>>> running at all. Giving me the same error as I posted above. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thursday, July 25, 2024 at 11:11:15 PM UTC-4 M&M wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I'm getting closer. Mosquito service is running but weewx >>>>>>>>>>>>>>>>> gives me the follow error in journalctl: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Jul 25 22:59:55 raspberrypi weewxd[25852]: INFO __main__: >>>>>>>>>>>>>>>>> Terminating weewx version 5.0.2 >>>>>>>>>>>>>>>>> Jul 25 22:59:55 raspberrypi systemd[1]: weewx.service: >>>>>>>>>>>>>>>>> Succeeded. >>>>>>>>>>>>>>>>> Jul 25 22:59:55 raspberrypi systemd[1]: Stopped WeeWX. >>>>>>>>>>>>>>>>> Jul 25 22:59:55 raspberrypi systemd[1]: weewx.service: >>>>>>>>>>>>>>>>> Consumed 3h 44min 13.462s CPU time. >>>>>>>>>>>>>>>>> Jul 25 23:00:51 raspberrypi systemd[1]: Started WeeWX. >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: INFO __main__: >>>>>>>>>>>>>>>>> Initializing weewxd version 5.0.2 >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: INFO __main__: >>>>>>>>>>>>>>>>> Command line: /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: Traceback (most >>>>>>>>>>>>>>>>> recent call last): >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewxd.py", line 265, in <module> >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: main() >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weewxd.py", line 107, in main >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: weewx_root, >>>>>>>>>>>>>>>>> user_module = weeutil.startup.initialize(config_dict) >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File >>>>>>>>>>>>>>>>> "/usr/share/weewx/weeutil/startup.py", line 67, in initialize >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: >>>>>>>>>>>>>>>>> importlib.import_module('user.extensions') >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File >>>>>>>>>>>>>>>>> "/usr/lib/python3.9/importlib/__init__.py", line 127, in >>>>>>>>>>>>>>>>> import_module >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: return >>>>>>>>>>>>>>>>> _bootstrap._gcd_import(name[level:], package, level) >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File "<frozen >>>>>>>>>>>>>>>>> importlib._bootstrap>", line 1030, in _gcd_import >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File "<frozen >>>>>>>>>>>>>>>>> importlib._bootstrap>", line 1007, in _find_and_load >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File "<frozen >>>>>>>>>>>>>>>>> importlib._bootstrap>", line 986, in _find_and_load_unlocked >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File "<frozen >>>>>>>>>>>>>>>>> importlib._bootstrap>", line 680, in _load_unlocked >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File "<frozen >>>>>>>>>>>>>>>>> importlib._bootstrap_external>", line 790, in exec_module >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File "<frozen >>>>>>>>>>>>>>>>> importlib._bootstrap>", line 228, in _call_with_frames_removed >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File >>>>>>>>>>>>>>>>> "/etc/weewx/bin/user/extensions.py", line 18, in <module> >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: >>>>>>>>>>>>>>>>> locale.setlocale(locale.LC_ALL, '') >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: File >>>>>>>>>>>>>>>>> "/usr/lib/python3.9/locale.py", line 610, in setlocale >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: return >>>>>>>>>>>>>>>>> _setlocale(category, locale) >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi weewxd[28347]: locale.Error: >>>>>>>>>>>>>>>>> unsupported locale setting >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi systemd[1]: weewx.service: >>>>>>>>>>>>>>>>> Main process exited, code=exited, status=1/FAILURE >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi systemd[1]: weewx.service: >>>>>>>>>>>>>>>>> Failed with result 'exit-code'. >>>>>>>>>>>>>>>>> Jul 25 23:00:53 raspberrypi systemd[1]: weewx.service: >>>>>>>>>>>>>>>>> Consumed 2.050s CPU time. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thursday, July 25, 2024 at 1:47:21 PM UTC-4 vince wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Pat's docs are authoritative for Belchertown and the MQTT >>>>>>>>>>>>>>>>>> stuff looks ok to me. Just follow that. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> https://github.com/weewx/weewx/wiki/mqtt has Tom's >>>>>>>>>>>>>>>>>> instructions for installing the MQTT extension. You can >>>>>>>>>>>>>>>>>> check it at least >>>>>>>>>>>>>>>>>> minimally by running "weectl extension list" and it should >>>>>>>>>>>>>>>>>> show up in the >>>>>>>>>>>>>>>>>> list of installed extensions. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Your config file stuff for weewx that you posted looked >>>>>>>>>>>>>>>>>> ok to me. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thursday, July 25, 2024 at 9:54:13 AM UTC-7 M&M wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> That is correct that I have the MQTT installed as an >>>>>>>>>>>>>>>>>>> extension for weewx which is running on the pi. I checked >>>>>>>>>>>>>>>>>>> for a >>>>>>>>>>>>>>>>>>> mqtt.service and I'm not seeing one on there. I'm also not >>>>>>>>>>>>>>>>>>> seeing a >>>>>>>>>>>>>>>>>>> mosquitto_sub or pub installed so I think I must have >>>>>>>>>>>>>>>>>>> missed anothe page to >>>>>>>>>>>>>>>>>>> get this installed and working. From searching around >>>>>>>>>>>>>>>>>>> right now, it looks >>>>>>>>>>>>>>>>>>> like I need to follow this page: >>>>>>>>>>>>>>>>>>> https://obrienlabs.net/how-to-setup-your-own-mqtt-broker/ >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I'm hoping to get this on a website that doesn't cost >>>>>>>>>>>>>>>>>>> anything but one step at a time. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Am I on the right track? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Wednesday, July 24, 2024 at 10:50:45 PM UTC-4 vince >>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Connection refused generally means the remote computer >>>>>>>>>>>>>>>>>>>> is not accepting incoming connections on that port. It >>>>>>>>>>>>>>>>>>>> looks to me like >>>>>>>>>>>>>>>>>>>> you are trying to connect to the MQTT server on the same >>>>>>>>>>>>>>>>>>>> pi ? Did you >>>>>>>>>>>>>>>>>>>> enable and start the MQTT server ? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Did you test it with mosquitto_sub and mosquitto_pub to >>>>>>>>>>>>>>>>>>>> know that the MQTT server is working ok ? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> The authoritative belchertown docs are at >>>>>>>>>>>>>>>>>>>> https://github.com/poblabs/weewx-belchertown?tab=readme-ov-file#mqtt-and-mqtt-websockets-optional >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> if you haven't gone through them already. Note that it >>>>>>>>>>>>>>>>>>>> has a prerequisite >>>>>>>>>>>>>>>>>>>> to install the MQTT extension which itself has >>>>>>>>>>>>>>>>>>>> prerequisite python modules. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Test with mosquitto_sub/pub first to know your MQTT >>>>>>>>>>>>>>>>>>>> server is working as desired, then do the weewx part. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wednesday, July 24, 2024 at 7:30:33 PM UTC-7 M&M >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Somewhat of a new user here to Weewx. I am running it >>>>>>>>>>>>>>>>>>>>> on a Raspberry Pi Zero W (192.168.0.196) and also >>>>>>>>>>>>>>>>>>>>> installed the Belchertown >>>>>>>>>>>>>>>>>>>>> skin. I followed these steps ( >>>>>>>>>>>>>>>>>>>>> https://www.wxforum.net/index.php?topic=43377.0) to >>>>>>>>>>>>>>>>>>>>> install and configure MQTT but I'm running into some >>>>>>>>>>>>>>>>>>>>> errors. Here is what >>>>>>>>>>>>>>>>>>>>> part of my weewx.conf file looks like for the MQTT stuff: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> [[MQTT]] >>>>>>>>>>>>>>>>>>>>> server_url = mqtt:// >>>>>>>>>>>>>>>>>>>>> random_username:random_...@192.168.0.196:1883 >>>>>>>>>>>>>>>>>>>>> <http://random_username:random_password@192.168.0.196:1883> >>>>>>>>>>>>>>>>>>>>> unit_system = US >>>>>>>>>>>>>>>>>>>>> topic = weather >>>>>>>>>>>>>>>>>>>>> binding = archive, loop >>>>>>>>>>>>>>>>>>>>> aggregation = aggregate >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> [[Belchertown]] >>>>>>>>>>>>>>>>>>>>> skin = Belchertown >>>>>>>>>>>>>>>>>>>>> HTML_ROOT = /var/www/html/weewx/belchertown >>>>>>>>>>>>>>>>>>>>> enable = true >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> [[[Extras]]] >>>>>>>>>>>>>>>>>>>>> #--- MQTT Websockets (for Real Time >>>>>>>>>>>>>>>>>>>>> Streaming) Options --- >>>>>>>>>>>>>>>>>>>>> mqtt_websockets_enabled = 1 >>>>>>>>>>>>>>>>>>>>> mqtt_websockets_host = 192.168.0.x >>>>>>>>>>>>>>>>>>>>> mqtt_websockets_port = 9001 >>>>>>>>>>>>>>>>>>>>> mqtt_websockets_ssl = 0 >>>>>>>>>>>>>>>>>>>>> mqtt_websockets_topic = weather/loop >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I also added user.mqtt.MQTT to restful_services at the >>>>>>>>>>>>>>>>>>>>> end of the file. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> The error I'm seeing in journalctl is: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Jul 24 22:16:40 raspberrypi weewxd[25776]: ERROR >>>>>>>>>>>>>>>>>>>>> user.mqtt: Failed to connect to MQTT server (mqtt:// >>>>>>>>>>>>>>>>>>>>> random_username:x...@192.168.0.196:1883 >>>>>>>>>>>>>>>>>>>>> <http://random_username:xxx@192.168.0.196:1883>): >>>>>>>>>>>>>>>>>>>>> [Errno 111] Connection refused >>>>>>>>>>>>>>>>>>>>> Jul 24 22:16:40 raspberrypi weewxd[25776]: ERROR >>>>>>>>>>>>>>>>>>>>> weewx.restx: MQTT: Failed to publish record 2024-07-24 >>>>>>>>>>>>>>>>>>>>> 22:15:00 EDT >>>>>>>>>>>>>>>>>>>>> (1721873700): MQTT client not available >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Any ideas what I'm missing? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/81877241-40e9-426e-ae14-1d2d709008ecn%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/81877241-40e9-426e-ae14-1d2d709008ecn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f9c5da98-d06b-4146-a039-c3de9671fbf7n%40googlegroups.com.
