Hi, Also noticed the same. Did you ever get anywhere with this?
Am thinking about changing the console to use WU format, and changing interceptor to use wu-client. But haven't got that far yet RRB. On Wednesday 17 July 2024 at 16:14:36 UTC+1 Jeff Burricelli wrote: > Is anyone using the ECOWITT Wittboy Pro Weather Station HP2564, with 7 > Inch HP2560 TFT Display Console and WS90 Outdoor Weather Sensor combo? My > rain totals keep increasing through out the day, even if no more rain > occurs. From running in console mode, I feel like the ecowitt is reporting > its total rain itself, but weewx is taking that number and just adding it > to its own total each loop. This combo is not supported by the ecowitt > gateway drive, so I am forced to use the interceptor. Here is my > interceptor config which I used based off other posts here: > > [Interceptor] > driver = user.interceptor > device_type = ecowitt-client > port = 8000 > [[sensor_map_extensions]] > rain = drain_piezo > rainRate = rrain_piezo > supplyVoltage = wh90batt > referenceVoltage = ws90cap_volt > > Thanks! > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4d35ad89-58bc-4431-9262-7e3a8a6ee8bbn%40googlegroups.com.
