<https://translate.google.com/about/?hl=de> <https://policies.google.com/?hl=de> <https://support.google.com/translate/?hl=de> <https://www.google.com/about?hl=de> Hello Doug I have a question. It's now been 2 years since my last post. My search didn't turn up much worth knowing either. That's why I wanted to ask again whether anything has happened in these 2 years regarding the reading of the fine dust sensor. The aim would therefore be to write the measured values into a separate database. The goal would be to discharge every minute. I want to save the weather data, i.e. not reduce the interval to 10 minutes, as this has no meaning for this data. Greeting
<https://translate.google.com/saved> <https://translate.google.com/contribute> Übersetzungsergebnisse verfügbar Doug Jenkins schrieb am Sonntag, 14. August 2022 um 13:26:01 UTC+2: > No problem. I reviewed the airlink proxy code and it is a bit of effort to > get setup and configured. I personally do not use the proxy as I am just > polling the sensor every 5 minutes. > > What I would do for now is just setup the weewx airlink driver with your > station and set the archive interval to 60 seconds and see how that goes. > > DDJ > > > > On Sat, Aug 13, 2022 at 9:53 AM <sschn...@bluewin.ch> wrote: > >> Hello Doug. >> >> >> >> Thx for the Help. I've tried to somehow get that with the proxy. But >> unfortunately without success. Since I'm not a professional in such things, >> for me it's mostly stationery what's written there. Is there a more >> detailed guide on how to install this proxy? How can I start it >> afterwards and check whether it is running? >> >> Excuse my "dummy" question ;-) >> >> >> >> Greeting >> >> >> >> *Von:* weewx...@googlegroups.com <weewx...@googlegroups.com> *Im Auftrag >> von *Doug Jenkins >> *Gesendet:* Freitag, 12. August 2022 20:17 >> *An:* weewx...@googlegroups.com >> *Betreff:* Re: [weewx-user] weewx airlink update >> >> >> >> You can by setting your archive interval to 60 seconds in the weewx conf >> file here >> >> >> >> [StdArchive] >> >> >> >> # If the station hardware supports data logging then the archive >> interval >> >> # will be downloaded from the station. Otherwise, specify it (in >> seconds). >> >> archive_interval = 300 >> >> >> >> Now with the Airlink driver, you may get a timeout from the API if you >> poll it all the time. John Kline has another repo that creates a proxy >> service for the airlink driver. that repo is here : >> chaunceygardiner/airlink-proxy: >> Proxy server for Davis AirLink air quality sensor. (github.com) >> <https://github.com/chaunceygardiner/airlink-proxy> >> >> >> >> DDJ >> >> >> >> On Fri, Aug 12, 2022 at 2:10 PM Meteo Oberwallis <sschn...@bluewin.ch> >> wrote: >> >> Hello everyone. >> >> I use the interval of 10 minutes at Weewx. Now, of course, the fine dust >> pollution is only measured at ten-minute intervals. Is there any way to set >> this interval to every minute? Then it would also be possible to save the >> particulate matter values in a separate SQLite database? Has that >> possibly already run someone of you? >> >> It`s the original Davis Air Quality Sensor. >> >> >> >> I have this -> https://github.com/chaunceygardiner/weewx-airlink >> >> >> >> Thank for our Help`s >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/9d580716-93d3-41d4-87c5-54d345e583e8n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/9d580716-93d3-41d4-87c5-54d345e583e8n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/L351f8T97jg/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/CACC0i0wqNWKiiuHy13-0pSf-4O3CRWYXBDLtbhK3HDWZFcuhLw%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/weewx-user/CACC0i0wqNWKiiuHy13-0pSf-4O3CRWYXBDLtbhK3HDWZFcuhLw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/000e01d8af1c%241efe0a60%245cfa1f20%24%40bluewin.ch >> >> <https://groups.google.com/d/msgid/weewx-user/000e01d8af1c%241efe0a60%245cfa1f20%24%40bluewin.ch?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/cba910fb-a18b-4dbf-80c6-871db148a270n%40googlegroups.com.
