check your altitude in weewx.conf - you possibly have a typo there. It
should look like:
altitude = 365, foot # Choose 'foot' or 'meter' for unit
On Wednesday, March 20, 2024 at 11:54:05 AM UTC-7 [email protected] wrote:
> Just guessing by the error message:
>
> weectl.py: error: unrecognized arguments: feet,foot
>
> https://weewx.com/docs/5.0/reference/skin-options/units/?h=singular#groups
> Note that the measurement unit is always specified in the singular. That
> is, specify degree_C or foot, not degrees_C or feet.
>
>
>
> Ron Walker schrieb am Mittwoch, 20. März 2024 um 19:24:41 UTC+1:
>
>> I have been through the forum looking for this issue , but have not seen
>> this issue addressed.
>>
>> I;m trying to install weewx 5.02 on a fresh install of Debian Buster on a
>> Raspberry Pi 3. When I attempt to install weewx, I get the following:
>>
>> ron@WeatherPi5:~ $ wget -qO - https://weewx.com/apt/weewx-python3.list |
>> sudo tee /etc/apt/sources.list.d/weewx.list
>> deb [arch=all] http://weewx.com/apt/python3 buster main
>> ron@WeatherPi5:~ $ sudo apt update
>> Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
>> Get:2 http://weewx.com/apt/python3 buster InRelease [4,252 B]
>>
>> Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
>>
>> Get:4 http://weewx.com/apt/python3 buster/main all Packages [4,988 B]
>> Fetched 9,240 B in 2s (5,992 B/s)
>> Reading package lists... Done
>> Building dependency tree... Done
>> Reading state information... Done
>> All packages are up to date.
>> ron@WeatherPi5:~ $ sudo apt install weewx
>> Reading package lists... Done
>> Building dependency tree... Done
>> Reading state information... Done
>> The following package was automatically installed and is no longer
>> required:
>> libfuse2
>> Use 'sudo apt autoremove' to remove it.
>> The following additional packages will be installed:
>> python3-cheetah python3-configobj python3-ephem python3-usb
>> Suggested packages:
>> python-cheetah-doc python3-markdown python3-memcache
>> python-configobj-doc
>> sqlite ftp httpd
>> The following NEW packages will be installed:
>> python3-cheetah python3-configobj python3-ephem python3-usb weewx
>> 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
>> Need to get 2,370 kB of archives.
>> After this operation, 9,616 kB of additional disk space will be used.
>> Do you want to continue? [Y/n] y
>> Get:2 http://weewx.com/apt/python3 buster/main all weewx all 5.0.2-1
>> [1,556 kB]
>> Get:1 http://mirror.us.leaseweb.net/raspbian/raspbian bullseye/main
>> armhf python3-configobj all 5.0.6-4 [35.8 kB]
>> Get:3 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf
>> python3-cheetah armhf 3.2.6-1+b1 [142 kB]
>> Get:4 http://mirror.us.leaseweb.net/raspbian/raspbian bullseye/main
>> armhf python3-usb all 1.0.2-2 [38.9 kB]
>> Get:5 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf
>> python3-ephem armhf 3.7.7.1-1+b1 [596 kB]
>> Fetched 2,370 kB in 2s (1,376 kB/s)
>> Preconfiguring packages ...
>> Selecting previously unselected package python3-configobj.
>> (Reading database ... 173112 files and directories currently installed.)
>> Preparing to unpack .../python3-configobj_5.0.6-4_all.deb ...
>> Unpacking python3-configobj (5.0.6-4) ...
>> Selecting previously unselected package python3-cheetah.
>> Preparing to unpack .../python3-cheetah_3.2.6-1+b1_armhf.deb ...
>> Unpacking python3-cheetah (3.2.6-1+b1) ...
>> Selecting previously unselected package python3-usb.
>> Preparing to unpack .../python3-usb_1.0.2-2_all.deb ...
>> Unpacking python3-usb (1.0.2-2) ...
>> Selecting previously unselected package python3-ephem.
>> Preparing to unpack .../python3-ephem_3.7.7.1-1+b1_armhf.deb ...
>> Unpacking python3-ephem (3.7.7.1-1+b1) ...
>> Selecting previously unselected package weewx.
>> Preparing to unpack .../archives/weewx_5.0.2-1_all.deb ...
>> Unpacking weewx (5.0.2-1) ...
>> Setting up python3-usb (1.0.2-2) ...
>> Setting up python3-ephem (3.7.7.1-1+b1) ...
>> Setting up python3-cheetah (3.2.6-1+b1) ...
>> Setting up python3-configobj (5.0.6-4) ...
>> Setting up weewx (5.0.2-1) ...
>> Using weewx:weewx as user:group
>> Creating /etc/default/weewx
>> usage: weectl.py -v|--version
>> weectl.py -h|--help
>> weectl.py database --help
>> weectl.py debug --help
>> weectl.py device --help
>> weectl.py extension --help
>> weectl.py import --help
>> weectl.py report --help
>> weectl.py station --help
>> weectl.py: error: unrecognized arguments: feet,foot
>> dpkg: error processing package weewx (--configure):
>> installed weewx package post-installation script subprocess returned
>> error exit
>> status 2
>> Processing triggers for man-db (2.9.4-2) ...
>> Errors were encountered while processing:
>> weewx
>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>
>> The result is that I cannot uninstall nor can I install weewx. Any help
>> would be appreciated. If this issue has been addressed, please point me to
>> it! Thanks!
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d708d64c-d09f-4f83-8dbc-2fd9717dfe35n%40googlegroups.com.
