You are missing a search list extension called "stats". I suspect
that this is the old stats module that came with WeeWX until v4.6.
If that's the case, I've attached it. Put it in /etc/weewx/bin/user
If it came from somewhere else, I have no idea what it is. Or,
perhaps you don't use it at all.
On Wed, Mar 6, 2024 at 12:32 PM salinois <[email protected]> wrote:
OK, I took that, thanks.
but I use this command:
|# Reconfigure to use your hardware *weectlstationreconfigure
*watch: [weectl station reconfigure Using configuration file
/etc/weewx/weewx.conf Processing configuration file
/etc/weewx/weewx.conf Give a description of the station. This
will be used for the title of reports. description [Loulle,
Jura (France)]: Specify altitude, with units 'foot' or
'meter'. For example: 35, foot 12, meter altitude [700,
meter]: Specify latitude in decimal degrees, negative for
south. latitude [46.2539]: Specify longitude in decimal
degrees, negative for west. longitude [5.3168]: Choose a unit
system for the reports. Later, you can modify your choice, or
choose a combination of units. Unit systems include: us (ºF,
inHg, in, mph) metricwx (ºC, mbar, mm, m/s) metric (ºC, mbar,
cm, km/h) unit system [us]: Choose a driver. Installed
drivers include: 0) BYOWS (user.byows) 1) AcuRite
(weewx.drivers.acurite) 2) BYOWS (weewx.drivers.byows) 3)
CC3000 (weewx.drivers.cc3000) 4) FineOffsetUSB
(weewx.drivers.fousb) 5) Simulator (weewx.drivers.simulator)
6) TE923 (weewx.drivers.te923) 7) Ultimeter
(weewx.drivers.ultimeter) 8) Vantage (weewx.drivers.vantage)
9) WMR100 (weewx.drivers.wmr100) 10) WMR300
(weewx.drivers.wmr300) 11) WMR9x8 (weewx.drivers.wmr9x8) 12)
WS1 (weewx.drivers.ws1) 13) WS23xx (weewx.drivers.ws23xx) 14)
WS28xx (weewx.drivers.ws28xx) driver: 0 You can register the
station on weewx.com <http://weewx.com>, where it will be
included in a map. If you choose to register, you will also
need a unique URL to identify the station (such as a website,
or a WeatherUnderground link). register this station (y/n)?
[n] Saving configuration file /etc/weewx/weewx.conf Saved old
configuration file as /etc/weewx/weewx.conf.20240306210700]
And this is better. sudo systemctl restart weewx.service
pi@raspberrypi:~/Documents $ sudo systemctl status
weewx.service ● weewx.service - WeeWX Loaded: loaded
(/lib/systemd/system/weewx.service; enabled; vendor preset:
enabled) Active: active (running) since Wed 2024-03-06
21:07:54 CET; 2s ago Docs: https://weewx.com/docs Main PID:
30869 (python3) Tasks: 4 (limit: 4915) CPU: 577ms CGroup:
/system.slice/weewx.service └─30869 python3
/usr/share/weewx/weewxd.py /etc/weewx/weewx.conf mars 06
21:07:54 raspberrypi weewxd[30869]: INFO weewx.restx: CWOP:
Posting not enabled. mars 06 21:07:54 raspberrypi
weewxd[30869]: INFO weewx.restx: WOW: Posting not enabled.
mars 06 21:07:54 raspberrypi weewxd[30869]: INFO weewx.restx:
AWEKAS: Posting not enabled. mars 06 21:07:54 raspberrypi
weewxd[30869]: INFO weewx.engine: 'pyephem' detected,
extended almanac data is available mars 06 21:07:54
raspberrypi weewxd[30869]: INFO __main__: Starting up weewx
version 5.0.2 mars 06 21:07:54 raspberrypi weewxd[30869]:
INFO weewx.engine: Using binding 'wx_binding' to database
'weewx.sdb' mars 06 21:07:54 raspberrypi weewxd[30869]: INFO
weewx.manager: Starting backfill of daily summaries mars 06
21:07:54 raspberrypi weewxd[30869]: INFO weewx.manager: Daily
summaries up to date mars 06 21:07:54 raspberrypi
weewxd[30869]: INFO weewx.engine: Starting main packet loop.
mars 06 21:07:54 raspberrypi weewxd.py[30869]: BYOWS RPi:
Unknown Wind Vane value: 0.0 but I have again these ERRORS
!!! [Mar 6 21:30:16 raspberrypi weewxd[31170]: INFO
weewx.manager: Added record 2024-03-06 21:30:00 CET
(1709757000) to database 'weewx.sdb' Mar 6 21:30:16
raspberrypi weewxd[31170]: INFO weewx.manager: Added record
2024-03-06 21:30:00 CET (1709757000) to daily summary in
'weewx.sdb' Mar 6 21:30:16 raspberrypi weewxd.py: BYOWS RPi:
Unknown Wind Vane value: 0.0 Mar 6 21:30:17 raspberrypi
weewxd[31170]: INFO weewx.cheetahgenerator: Generated 8 files
for report SeasonsReport in 1.26 seconds Mar 6 21:30:18
raspberrypi weewxd[31170]: INFO weewx.imagegenerator:
Generated 15 images for report SeasonsReport in 0.69 seconds
Mar 6 21:30:18 raspberrypi weewxd[31170]: INFO
weewx.reportengine: Copied 0 files to /var/www/html/weewx Mar
6 21:30:18 raspberrypi weewxd[31170]: ERROR
weewx.reportengine: Caught unrecoverable exception in
generator 'weewx.cheetahgenerator.CheetahGenerator' Mar 6
21:30:18 raspberrypi weewxd[31170]: ERROR weewx.reportengine:
**** No module named 'user.stats' Mar 6 21:30:18 raspberrypi
weewxd[31170]: ERROR weewx.reportengine: **** Traceback (most
recent call last): Mar 6 21:30:18 raspberrypi weewxd[31170]:
ERROR weewx.reportengine: **** File
"/usr/share/weewx/weewx/reportengine.py", line 220, in run
Mar 6 21:30:18 raspberrypi weewxd[31170]: ERROR
weewx.reportengine: **** obj.start() Mar 6 21:30:18
raspberrypi weewxd[31170]: ERROR weewx.reportengine: ****
File "/usr/share/weewx/weewx/reportengine.py", line 409, in
start Mar 6 21:30:18 raspberrypi weewxd[31170]: ERROR
weewx.reportengine: **** self.run() Mar 6 21:30:18
raspberrypi weewxd[31170]: ERROR weewx.reportengine: ****
File "/usr/share/weewx/weewx/cheetahgenerator.py", line 163,
in run Mar 6 21:30:18 raspberrypi weewxd[31170]: ERROR
weewx.reportengine: ****
self.init_extensions(gen_dict[section_name]) Mar 6 21:30:18
raspberrypi weewxd[31170]: ERROR weewx.reportengine: ****
File "/usr/share/weewx/weewx/cheetahgenerator.py", line 194,
in init_extensions Mar 6 21:30:18 raspberrypi weewxd[31170]:
ERROR weewx.reportengine: **** klass =
weeutil.weeutil.get_object(x) Mar 6 21:30:18 raspberrypi
weewxd[31170]: ERROR weewx.reportengine: **** File
"/usr/share/weewx/weeutil/weeutil.py", line 1404, in
get_object Mar 6 21:30:18 raspberrypi weewxd[31170]:
Traceback (most recent call last): Mar 6 21:30:18 raspberrypi
weewxd[31170]: File "/usr/share/weewx/weewx/reportengine.py",
line 220, in run Mar 6 21:30:18 raspberrypi weewxd[31170]:
obj.start() Mar 6 21:30:18 raspberrypi weewxd[31170]: File
"/usr/share/weewx/weewx/reportengine.py", line 409, in start
Mar 6 21:30:18 raspberrypi weewxd[31170]: self.run() Mar 6
21:30:18 raspberrypi weewxd[31170]: File
"/usr/share/weewx/weewx/cheetahgenerator.py", line 163, in
run Mar 6 21:30:18 raspberrypi weewxd[31170]:
self.init_extensions(gen_dict[section_name]) Mar 6 21:30:18
raspberrypi weewxd[31170]: File
"/usr/share/weewx/weewx/cheetahgenerator.py", line 194, in
init_extensions Mar 6 21:30:18 raspberrypi weewxd[31170]:
klass = weeutil.weeutil.get_object(x) Mar 6 21:30:18
raspberrypi weewxd[31170]: File
"/usr/share/weewx/weeutil/weeutil.py", line 1404, in
get_object Mar 6 21:30:18 raspberrypi weewxd[31170]: module =
importlib.import_module(module_name) Mar 6 21:30:18
raspberrypi weewxd[31170]: File
"/usr/lib/python3.9/importlib/__init__.py", line 127, in
import_module Mar 6 21:30:18 raspberrypi weewxd[31170]:
return _bootstrap._gcd_import(name[level:], package, level)
Mar 6 21:30:18 raspberrypi weewxd[31170]: File "<frozen
importlib._bootstrap>", line 1030, in _gcd_import Mar 6
21:30:18 raspberrypi weewxd[31170]: File "<frozen
importlib._bootstrap>", line 1007, in _find_and_load Mar 6
21:30:18 raspberrypi weewxd[31170]: File "<frozen
importlib._bootstrap>", line 984, in _find_and_load_unlocked
Mar 6 21:30:18 raspberrypi weewxd[31170]:
ModuleNotFoundError: No module named 'user.stats' Mar 6
21:30:18 raspberrypi weewxd[31170]: ERROR weewx.reportengine:
**** module = importlib.import_module(module_name) Mar 6
21:30:18 raspberrypi weewxd[31170]: ERROR weewx.reportengine:
**** File "/usr/lib/python3.9/importlib/__init__.py", line
127, in import_module Mar 6 21:30:18 raspberrypi
weewxd[31170]: ERROR weewx.reportengine: **** return
_bootstrap._gcd_import(name[level:], package, level) Mar 6
21:30:18 raspberrypi weewxd[31170]: ERROR weewx.reportengine:
**** File "<frozen importlib._bootstrap>", line 1030, in
_gcd_import Mar 6 21:30:18 raspberrypi weewxd[31170]: ERROR
weewx.reportengine: **** File "<frozen
importlib._bootstrap>", line 1007, in _find_and_load Mar 6
21:30:18 raspberrypi weewxd[31170]: ERROR weewx.reportengine:
**** File "<frozen importlib._bootstrap>", line 984, in
_find_and_load_unlocked Mar 6 21:30:18 raspberrypi
weewxd[31170]: ERROR weewx.reportengine: ****
ModuleNotFoundError: No module named 'user.stats' Mar 6
21:30:18 raspberrypi weewxd[31170]: ERROR weewx.reportengine:
**** Generator terminated Mar 6 21:30:18 raspberrypi
weewxd.py: BYOWS RPi: Unknown Wind Vane value: 0.0] but, I
don't again modify all the weewx.conf, maybe normaly......
Patrick |
Le 06/03/2024 à 21:13, Tom Keffer a écrit :
It should be
driver = user.byows
On Wed, Mar 6, 2024 at 11:29 AM salinois <[email protected]>
wrote:
ok Tom,
this is a fresh install, not upgrade, but When I put my
other sd card with 4.9 version, it is ok, so, it is not
a issue with GPIO, I think.
And yes, the driver is here:
[ls -ail /etc/weewx/bin/user/
total 32
526359 drwxrwsr-x 3 weewx weewx 4096 6 mars 18:32 .
526358 drwxrwsr-x 3 weewx weewx 4096 7 févr. 22:15 ..
524298 -rw-r--r-- 1 weewx weewx 10990 8 févr. 13:05
byows.py
526361 -rw-rw-r-- 1 weewx weewx 541 7 févr. 22:15
extensions.py
526360 -rw-rw-r-- 1 weewx weewx 306 7 févr. 22:15
__init__.py
655698 drwxr-sr-x 2 weewx weewx 4096 6 mars 18:32
__pycache__]
and the lines for the driver in weewx.conf are:
*[Station]*
# Description of the station location, such as your
town.
location = "Loulle, Jura (France)"
# Latitude in decimal degrees. Negative for southern
hemisphere.
latitude = 46.2539
# Longitude in decimal degrees. Negative for western
hemisphere.
longitude = 5.3168
# Altitude of the station, with the unit it is in.
This is used only
# if the hardware cannot supply a value.
altitude = 700, meter # Choose 'foot' or 'meter'
for unit
# Set to type of station hardware. There must be a
corresponding stanza
# in this file, which includes a value for the
'driver' option.
*station_type = BYOWS*
and next*
*
*#################################################################################
[BYOWS]
* # This section is for the Raspberry Pi Bring Your Own
Weather Station driver.
# The driver to use*
driver = byows ===> is it the good syntax ? *in
version 4.9 I have user.byows
but now, there no more errors:
[ sudo systemctl status weewx.service
● weewx.service - WeeWX
Loaded: loaded (/lib/systemd/system/weewx.service;
enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed
2024-03-06 20:21:34 CET; 3s ago
Docs: https://weewx.com/docs
Process: 29896 ExecStart=weewxd
/etc/weewx/weewx.conf (code=exited, status=1/FAILURE)
Main PID: 29896 (code=exited, status=1/FAILURE)
CPU: 337ms
mars 06 20:21:34 raspberrypi weewxd[29896]:
self.setupStation(config_dict)
mars 06 20:21:34 raspberrypi weewxd[29896]: File
"/usr/share/weewx/weewx/engine.py", line 104, in
setupStation
mars 06 20:21:34 raspberrypi weewxd[29896]:
__import__(driver)
mars 06 20:21:34 raspberrypi weewxd[29896]:
ModuleNotFoundError: *No module named 'byows'*
mars 06 20:21:34 raspberrypi weewxd[29896]: CRITICAL
__main__: **** File
"/usr/share/weewx/weewx/engine.py", line 104, in
setupStation
mars 06 20:21:34 raspberrypi weewxd[29896]: CRITICAL
__main__: **** __import__(driver)
mars 06 20:21:34 raspberrypi weewxd[29896]: CRITICAL
__main__: **** ModuleNotFoundError: No module named 'byows'
mars 06 20:21:34 raspberrypi weewxd[29896]: CRITICAL
__main__: **** Exiting.
mars 06 20:21:34 raspberrypi systemd[1]: weewx.service:
Main process exited, code=exited, status=1/FAILURE
mars 06 20:21:34 raspberrypi systemd[1]: weewx.service:
Failed with result 'exit-code'.]*
*
Patrick*
*
*
*
*
*
Le 06/03/2024 à 19:23, Tom Keffer a écrit :
If you did a package install, the driver byows.py
should go in /etc/weewx/bin/user. But, frankly, this
should have been done for you if you did an upgrade
from V4 to V5. Take a look in /etc/weewx/bin/user and
see if it's in there.
But, the error in the little snippet from your status
report is a different one. For some reason, your
installation thinks it is not running on a Raspberry
Pi, so it cannot access the gpio pins. I'm not an
expert on that, but it may be due to a missing
installation package.
On Wed, Mar 6, 2024 at 10:13 AM salinois
<[email protected]> wrote:
again me
perhaps , I found
Should I use this method now?
[weectl extension install /home/pi/byows.py]
and after:
weectl station reconfigures --no-prompt
--driver=weewx.drivers.byows
Patrick
Le 06/03/2024 à 18:47, salinois a écrit :
hello,
I restart my installation with version weewx 5.0.1
and I have these errors:
on my version which works in 4.10.2, my "byows.py"
driver is located here: [/usr/share/weewx/user/]
but I saw that the tree structure has changed;
where should I put my driver now?
watch these errors:
sudo systemctl status weewx.service
● weewx.service - WeeWX
Loaded: loaded
(/lib/systemd/system/weewx.service; enabled;
vendor preset: enabled)
Active: failed (Result: exit-code) since Wed
2024-03-06 18:32:05 CET; 2s ago
Docs: https://weewx.com/docs
Process: 11182 ExecStart=weewxd
/etc/weewx/weewx.conf (code=exited, status=4)
Main PID: 11182 (code=exited, status=4)
CPU: 682ms
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL weewx.engine: **** pin =
self.pin_factory.pin(pin)
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/gpiozero/pins/pi.py",
line 103, in pin
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL weewx.engine: **** pin =
self.pin_class(self, n)
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL weewx.engine: **** File
"/usr/lib/python3/dist-packages/gpiozero/pins/rpigpio.py",
line 111, in __init__
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL weewx.engine: ****
GPIO.setup(self.number, GPIO.IN <http://GPIO.IN>,
self.GPIO_PULL_UPS[self._pull])
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL weewx.engine: **** RuntimeError: Not
running on a RPi!
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL __main__:*Unable to load driver: Not
running on a RPi!*
mars 06 18:32:05 raspberrypi weewxd[11182]:
CRITICAL __main__: **** Exiting...
mars 06 18:32:05 raspberrypi systemd[1]:
weewx.service: Main process exited, code=exited,
status=4/NOPERMISSION
mars 06 18:32:05 raspberrypi systemd[1]:
weewx.service: Failed with result 'exit-code'.
Patrick
Le 08/02/2024 à 08:59, salinois a écrit :
hello Matthew
OK I understand if that works
thanks also to vince.
Now , I must to try the 5.0.0 version
Patrick
Le 07/02/2024 à 23:06, matthew wall a écrit :
On Wednesday, February 7, 2024 at 3:36:55 PM
UTC-5 [email protected] wrote:
pi@raspberrypi:~ $ wget -qO -
https://weewx.com/apt/weewx-python3.list |
sudo tee /etc/apt/sources.list.d/weewx.list
*/_deb [arch=all]
http://weewx.com/apt/python3 buster main_
==> _why Buster_/*
'buster' (i.e., debian 10) is the oldest release
on which the deb package will install.
if you look at the python2 configuration, it
uses the label 'squeeze' (debian 6)
the weewx packages are *really* stable with
respect to dependencies, so the same package
that works with debian 10 also works with debian
11 and debian 12. besides, i am too old and lazy
to build a new deb and new apt repository for
every major debian release that comes out :)
--
You received this message because you are
subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop
receiving emails from it, send an email to
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/ca7d09e7-acd7-4115-ae62-7ac60a1ef82bn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/ca7d09e7-acd7-4115-ae62-7ac60a1ef82bn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are
subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving
emails from it, send an email to
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/320351a0-1a0a-4474-9c39-de81a0e01011%40gmail.com
<https://groups.google.com/d/msgid/weewx-user/320351a0-1a0a-4474-9c39-de81a0e01011%40gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to
the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving
emails from it, send an email to
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zEA%3DtRcHr84k%2BigR-nQtPbaxsZTHoV7u2rnED7wr2QYQWg%40mail.gmail.com
<https://groups.google.com/d/msgid/weewx-user/CAPq0zEA%3DtRcHr84k%2BigR-nQtPbaxsZTHoV7u2rnED7wr2QYQWg%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to
the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/e38a1a56-974c-4fa8-804c-b095698ed7df%40gmail.com
<https://groups.google.com/d/msgid/weewx-user/e38a1a56-974c-4fa8-804c-b095698ed7df%40gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zECppBi9R8cp2ZvBtagbfuWQDUdmz58Ry-KLDya%2BW11dDA%40mail.gmail.com
<https://groups.google.com/d/msgid/weewx-user/CAPq0zECppBi9R8cp2ZvBtagbfuWQDUdmz58Ry-KLDya%2BW11dDA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/ec687b6e-de74-4e9d-9870-53fbdbc8385b%40gmail.com
<https://groups.google.com/d/msgid/weewx-user/ec687b6e-de74-4e9d-9870-53fbdbc8385b%40gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zEDSxwrcxbgKMhRrk919eiZWYNw_UT8PG%2BbcAEcVLJZcUw%40mail.gmail.com
<https://groups.google.com/d/msgid/weewx-user/CAPq0zEDSxwrcxbgKMhRrk919eiZWYNw_UT8PG%2BbcAEcVLJZcUw%40mail.gmail.com?utm_medium=email&utm_source=footer>.
