You have some pretty hideously formatted JSON to parse, but here's what it
looks like in a more readable format after piping it through 'jq' and doing
a little hand editing for readability....
{
"sensor": [
{
"title": "Indoor",
"list": [
[ "Temperature", "68.9", "°F" ],
[ "Humidity", "38", "%" ] ]
},
{
"title": "Outdoor",
"list": [
[ "Temperature", "61.7", "°F" ],
[ "Humidity", "29", "%" ] ]
},
{
"title": "Pressure", "list": [
[ "Absolute", "26.76", "inhg" ],
[ "Relative", "29.84", "inhg" ] ]
},
{
"title": "Wind Speed",
"list": [
[ "Max Daily Gust", "5.1", "mph" ],
[ "Wind", "1.1", "mph" ],
[ "Gust", "1.6", "mph" ],
[ "Direction", "123", "°" ],
[ "Wind Average 2 Minute", "0.4", "mph" ],
[ "Direction Average 2 Minute", "111", "°" ],
[ "Wind Average 10 Minute", "1.3", "mph" ],
[ "Direction Average 10 Minute", "134", "°" ]
]
},
{
"title": "Rainfall",
"list": [
[ "Rate", "0.0", "inch/hr" ],
[ "Hour", "0.0", "inch", "43" ],
[ "Day", "0.0", "inch", "44" ],
[ "Week", "0.0", "inch", "45" ],
[ "Month", "0.0", "inch", "46" ],
[ "Year", "5.72", "inch", "47" ],
[ "Total", "10.65", "inch", "48" ]
],
"range": "Range: 0inch to 393.7inch."
},
{
"title": "Solar",
"list": [
[ "Light", "261.36", "w/m²" ],
[ "UVI", "1.2", "" ]
]
}
],
"battery": {
"title": "Battery",
"list": [ "All battery are ok" ]
}
}
On Wednesday, March 6, 2024 at 11:59:36 AM UTC-8 Michael wrote:
> I have officially given up on getting interceptor to work in sniffing mode
> on Phython3.
>
> On Wednesday, March 6, 2024 at 11:17:39 AM UTC-7 matthew wall wrote:
>
>> it looks like the raddy L7 can upload to wundgerground, so if you are
>> using the raddy's wifi, you should be able to use the interceptor driver to
>> capture or directly receive the wunderground output. setting up the
>> interceptor is not trivial, but there are many examples.
>>
>> it would be nice if there were a generic json driver, analogous to the
>> fileparse driver. but the json structure varies a lot from one device to
>> another, and the mechanism for obtaining that json output also varies. for
>> example, the tempest broadcasts json data, whereas the ruddy emits json as
>> a response to http request. so i understand why no one has written one yet.
>>
>> m
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/421d1ce1-9dcf-4148-827d-b97c92a4495cn%40googlegroups.com.
