I am using an acurite atlas 7 in 1 weather station and am following the instructions on Matthew walls sdr rpi recipe and similarly ChrisM510 on Acurite Atlas on WeeWX RTL SDR RTL_433 RPi on GitHub. Before the weewx 5.0 update I had everything in these instructions working and was using the weewx-mqtt to send information to a broker. Now as i try to do the same as on this tutorial with weewx 5.0 I run into many errors. I followed these steps git clone https://github.com/merbanan/rtl_433 cd rtl_433 mkdir build cd build cmake .. make sudo make install And when i enter rtl_433 to see what devices are broadcasting data I get the following message "rtl_433 version 23.11-54-gf88bf685 branch master at 202402112003 inputs file rtl_tcp RTL-SDR
Kernel driver is active, or device is claimed by second instance of librtlsdr. In the first case, please either detach or blacklist the kernel module (dvb_usb_rtl28xxu), or enable automatic detaching at compile time. usb_claim_interface error -6 [sdr_open_rtl] Failed to open rtlsdr device #0. [sdr_open_rtl] Unable to open a device" I blacklisted the kernel module dvb_usb_rtl28xxu in /etc/modprobe.d/blacklist using sudo nano /etc/modprobe.d/blacklist and adding in blacklist dvb_usb_rtl28xxu but this didn't work. On another Rspberry pi everything on ChrisM510 instructions installed and also installed weewx-mqtt but the only time the broker will get information from the raspberry pi is when I run weewx directly and not as a daemon. Any help would be appreciated. Thanks -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3a34ba47-8322-43af-b98b-c5e3c0b4252en%40googlegroups.com.
