Ignore that empty queue, I forgot that the console device actively reports to a certain IP...
michael.k...@gmx.at schrieb am Samstag, 20. Januar 2024 um 08:52:04 UTC+1: > The empty queue is probably because of running it in WSL and being in a > different IP range than the Console: > 2024-01-19 18:47:39 weewxd[13771] DEBUG user.interceptor: empty queue > > $ ip addr > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > group default qlen 1000 > link/ether 00:15:5d:a1:b2:53 brd ff:ff:ff:ff:ff:ff > inet 172.19.239.191/20 brd 172.19.239.255 scope global eth0 > valid_lft forever preferred_lft forever > inet6 fe80::215:5dff:fea1:b253/64 scope link > valid_lft forever preferred_lft forever > > And the console has 10.0.1.106 > > I need to set up WSL to be in the same network or try this on another > machine. > > Anyway, @grj80: have you ever considered collecting data from more than > one ecowitt console device with the driver? For me this would make perfect > sense, but I can very well understand, if it doesn't to you :D > michael.k...@gmx.at schrieb am Freitag, 19. Januar 2024 um 18:48:05 UTC+1: > >> Yes, it's possible. >> 2024-01-19 18:27:35 weewxd[5855] DEBUG user.gw1000: Next update in 9 >> seconds >> 2024-01-19 18:27:35 weewxd[5855] DEBUG user.gw1000: Next update in 9 >> seconds >> LOOP: 2024-01-19 18:27:35 CET (1705685255) 'altimeter': >> '1023.2565915245989', 'appTemp': '-4.6378894597484965', 'barometer': >> '1026.3446847507096', 'cloudbase': '972.4294835518078', 'dateTime': >> '1705685255', 'daymaxwind': '2.1', 'dayRain': '4.7', 'dewpoint': >> '-6.267050581532717', 'ET': 'None', 'extraHumid6': '62', 'extraHumid7': >> '61', 'extraHumid8': '58', 'extraTemp6': '14.8', 'extraTemp7': '19.9', >> 'extraTemp8': '20.6', 'heatindex': '-1.9000000000000008', 'humidex': >> '-1.9', 'inDewpoint': '12.462345522375951', 'inHumidity': '60', 'inTemp': >> '20.5', 'lightning_distance': 'None', 'lightning_last_det_time': >> '1705345360', 'lightning_strike_count': '0', 'lightningcount': '0', >> 'luminosity': '0.0', 'maxSolarRad': '0.0', 'monthRain': '50.4', >> 'outHumidity': '72', 'outTemp': '-1.9', 'p_dayRain': '0.0', 'p_monthRain': >> '26.5', 'p_rain': '0.0', 'p_rainRate': '0.0', 'p_stormRain': '0.0', >> 'p_weekRain': '11.8', 'p_yearRain': '26.5', 'pressure': '971.0', >> 'radiation': '0.0', 'rain': '0.0', 'rainRate': '0.0', 'relbarometer': >> '1023.8', 'stormRain': '0.0', 'usUnits': '17', 'UV': '0', 'uvradiation': >> '0.0', 'weekRain': '15.2', 'wh31_ch6_batt': '0', 'wh31_ch6_sig': '4', >> 'wh31_ch7_batt': '0', 'wh31_ch7_sig': '4', 'wh31_ch8_batt': '0', >> 'wh31_ch8_sig': '4', 'wh32_batt': '0', 'wh32_sig': '4', 'wh40_batt': >> '1.45', 'wh40_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 'windchill': >> '-1.9000000000000008', 'windDir': 'None', 'windGust': '1.3', 'windrun': >> 'None', 'windSpeed': '0.0', 'ws90_batt': '3.28', 'ws90_sig': '4', >> 'yearRain': '50.4' >> >> But why would anybody want to do this? I have two GW2000 devices and want >> to store and show data of as many of my sensor possible in a single weewx >> instance. Yet configuring the driver both, as driver and a service at the >> same time, seems to work as I hoped at least foor LOOP: two device queries, >> on LOOP data. >> >> The question now: is it possible to configure the driver/service in a >> way, they uses their own ip_address and is it possible to map the >> Wind/Dir/Gust of the WS90 bound to the one GW2000, to e.g. >> us_windSpeed/us_windDir/us_windGust (us for ultrasonic) just like p_rain >> for the haptic array? >> >> Or isn't this possible and do I have to combine the Interceptor driver >> with the Ecowitt Gateway Driver, one as a service, the other as a Driver to >> achieve this? If yes, how could this be possible, I tried it with >> Interceptor as a driver and Ecowitt Gateway Driver as a Service and get not >> device data: >> 2024-01-19 18:46:59 weewxd[13771] DEBUG user.interceptor: empty queue >> 2024-01-19 18:47:07 weewxd[13771] DEBUG user.gw1000: Next update in 9 >> seconds >> 2024-01-19 18:47:09 weewxd[13771] DEBUG user.interceptor: empty queue >> 2024-01-19 18:47:16 weewxd[13771] DEBUG user.gw1000: Next update in 9 >> seconds >> 2024-01-19 18:47:19 weewxd[13771] DEBUG user.interceptor: empty queue >> 2024-01-19 18:47:25 weewxd[13771] DEBUG user.gw1000: Next update in 9 >> seconds >> 2024-01-19 18:47:29 weewxd[13771] DEBUG user.interceptor: empty queue >> 2024-01-19 18:47:34 weewxd[13771] DEBUG user.gw1000: Next update in 9 >> seconds >> 2024-01-19 18:47:39 weewxd[13771] DEBUG user.interceptor: empty queue >> 2024-01-19 18:47:43 weewxd[13771] DEBUG user.gw1000: Next update in 9 >> seconds >> 2024-01-19 18:47:49 weewxd[13771] DEBUG user.interceptor: empty queue >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f6d982c4-e13b-497e-b3b6-53f74313ead7n%40googlegroups.com.
