Hello Rainer, *Did you press the USB button for the console to initiate the communication while weewx was waiting ? YesDid you choose the proper Logger in the console ? I am not sure what you mean with that.* I followed the instruction for installation as given from: Platform Packages
For Debian, Ubuntu, Mint, including Raspberry Pi, see: http://weewx.com/docs/debian.htm I cannot access the installation now and will provide more detailed log later with debug set to 1. I may have forgotten to add the Klimalogg installation at GitHub - matthewwall/weewx-klimalogg: klimalogg pro driver for weewx <https://github.com/matthewwall/weewx-klimalogg> /Boris måndag 11 december 2023 kl. 17:03:56 UTC+1 skrev Rainer Lang: > only from the context (and when you know) one can guess that you are > talking about KlimaLogg and the the KlimaLogg extension. > And the messages refer to the tranceiver USB stick through which the > KlimaLogg console communicates with weewx > Are you aware of how the two devices cooperate ? > > Did you press the USB button for the console to initiate the communication > while weewx was waiting ? > Did you choose the proper Logger in the console ? > That doesn't look like a weewx issue but a user issue handling their > hardware 😎 > what does the [kl] stanza in your weewx.conf look like ? > > Normally we reply here only if you provide a log from a new start of weewx > - and from the start of the logging > such snippets are not helpful - most likely, provided you have set debug = > 1 or debug = 3 in weewx.conf and restarted, > in the earlier syslog messages at startup some hints can be found > > providing such a complete log has the chance to be more insightful - > looking forward to seeing it ... > On 11.12.2023 16:29, BORIS wrote: > > When starting a new installation I get the following error. > > boris@boris-NUC-Jamjo:~$ sudo tail -f /var/log/syslog > Dec 11 16:21:16 boris-NUC-Jamjo weewx[770] INFO user.kl: press the USB > button to start communication > Dec 11 16:21:28 boris-NUC-Jamjo wpa_supplicant[638]: wlo2: Reject scan > trigger since one is already pending > Dec 11 16:21:28 boris-NUC-Jamjo wpa_supplicant[638]: wlo2: Failed to > initiate AP scan > Dec 11 16:21:29 boris-NUC-Jamjo wpa_supplicant[638]: wlo2: Reject scan > trigger since one is already pending > Dec 11 16:21:29 boris-NUC-Jamjo wpa_supplicant[638]: wlo2: Failed to > initiate AP scan > Dec 11 16:21:30 boris-NUC-Jamjo wpa_supplicant[638]: wlo2: Reject scan > trigger since one is already pending > Dec 11 16:21:30 boris-NUC-Jamjo wpa_supplicant[638]: wlo2: Failed to > initiate AP scan > Dec 11 16:21:31 boris-NUC-Jamjo weewx[770] INFO user.kl: press the USB > button to start communication > Dec 11 16:21:46 boris-NUC-Jamjo weewx[770] INFO user.kl: press the USB > button to start communication > Dec 11 16:22:01 boris-NUC-Jamjo weewx[770] INFO user.kl: press the USB > button to start communication > Dec 11 16:22:16 boris-NUC-Jamjo weewx[770] INFO user.kl: press the USB > button to start communication > Dec 11 16:22:23 boris-NUC-Jamjo weewx[770] ERROR user.kl: > generateResponse: intercepted message from device 01bd with length: e5 > Dec 11 16:22:23 boris-NUC-Jamjo weewx[770] ERROR user.kl: unexpected > device ID (id=01bd); use parameter 'serial' if more than one USB > transceiver present > Dec 11 16:22:23 boris-NUC-Jamjo weewx[770] ERROR user.kl: > generateResponse: intercepted message from device 01bd with length: e5 > Dec 11 16:22:23 boris-NUC-Jamjo weewx[770] ERROR user.kl: unexpected > device ID (id=01bd); use parameter 'serial' if more than one USB > transceiver present > Dec 11 16:22:23 boris-NUC-Jamjo weewx[770] ERROR user.kl: > generateResponse: intercepted message from device 01bd with length: e5 > Dec 11 16:22:23 boris-NUC-Jamjo weewx[770] ERROR user.kl: unexpected > device ID (id=01bd); use parameter 'serial' if more than one USB > transceiver present > Dec 11 16:22:24 boris-NUC-Jamjo weewx[770] ERROR user.kl: > generateResponse: intercepted message from device 01bd with length: e5 > Dec 11 16:22:24 boris-NUC-Jamjo weewx[770] ERROR user.kl: unexpected > device ID (id=01bd); use parameter 'serial' if more than one USB > transceiver present > Dec 11 16:22:24 boris-NUC-Jamjo weewx[770] ERROR user.kl: > generateResponse: intercepted message from device 01bd with length: e5 > Dec 11 16:22:24 boris-NUC-Jamjo weewx[770] ERROR user.kl: unexpected > device ID (id=01bd); use parameter 'serial' if more than one USB > transceiver present > Dec 11 16:22:24 boris-NUC-Jamjo weewx[770] ERROR user.kl: > generateResponse: intercepted message from device 01bd with length: e5 > Dec 11 16:22:24 boris-NUC-Jamjo weewx[770] ERROR user.kl: unexpected > device ID (id=01bd); use parameter 'serial' if more than one USB > transceiver present > Dec 11 16:22:25 boris-NUC-Jamjo weewx[770] ERROR user.kl: > generateResponse: intercepted message from device 01bd with length: e5 > Dec 11 16:22:25 boris-NUC-Jamjo weewx[770] ERROR user.kl: unexpected > device ID (id=01bd); use parameter 'serial' if more than one USB > transceiver present > > What is wrong? > /Boris > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/e098085b-7b58-44b6-b0d3-fd740edd6d7en%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/e098085b-7b58-44b6-b0d3-fd740edd6d7en%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/d932a614-2bab-4b0b-bb98-51d014513254n%40googlegroups.com.
