You may be able to use this. I have this and a WLL and like the WFL better. https://www.scaledinstruments.com/shop/shop-by-category/data-loggers/wifilogger2/
On Wednesday, October 11, 2023 at 10:41:35 AM UTC-4 Tom Hogland wrote: > I currently have a VP2 and use the 6316 Envoy and 6510Ser datalogger > connected to the PC running weewx. If you have the VP2 console close to the > PC you want to use for weewx you can install the new datalogger in it and > run the cord to the PC - nothing else required. If not, then you can either > use the 6316 Envoy and a 6510 datalogger in place of the console and put it > by your PC, or you can get a 6100 WLL. WLL replaces the Envoy and > datalogger and uploads directly to Davis Cloud - the "weatherlinklive" > driver would sniff the network and intercept those packets coming from the > WLL and inject them to weewx. > > Note that the WLL has temp/humidity and barometer built in. It can read > additional wireless sensors, but so can the Envoy - each has 8 channels it > can listen to. Both are pricey, but it appears that WLL is the "way of the > future" for them, rather than the Envoy. > > My VP2 combination has been online since about 2004 without issue, and > using weewx since wview went defunct several years ago. I also run a > Tempest, and I'm looking forward to replacing my weird "dual station" > configuration with two small containers using v5. > > -Tom > > > On Wednesday, October 11, 2023 at 5:54:29 AM UTC-8 Rich Strle wrote: > >> Question: Will the ‘stock’ WeeWX driver communicate with the 6100 Davis >> WeatherLink Live? >> >> >> Detail: >> >> >> I have upgraded to a Davis VantagePro2 (VP2) from a VantagePro1 (VP1). >> >> >> Currently I get data from the VP1 from a Davis Envoy product number 6314 >> with a serial data logger installed. >> >> >> To get the same functionality in my VP2 I need a new Davis Envoy product >> number 6316 Data Envoy and a new data logger 6510USB Davis WeatherLink >> Computer Interface. >> >> >> Would I be better off with a 6100 Davis WeatherLink Live? It seems to >> offer more functionality like adding additional sensors including the Davis >> Airline air quality sensor. >> >> >> In the Vantage Notes section: >> >> >> “The Davis Vantage stations include a variety of models and >> configurations. The WeeWX driver can communicate with a console or envoy >> using serial, USB, or TCP/IP interface.” >> >> >> Poking around in the drivers section of the wiki, I see a weatherlinklive >> weewx-driver. Is that my best option to feed data into weewx? >> >> >> Or will the ‘stock’ WeeWX driver communicate with the 6100 Davis >> WeatherLink Live? >> >> >> Apologies for the long drawn out question. My VP1 ran since 2001 and fed >> data to my website since then. A lot has changed since then. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/eae2b3a9-6774-4c05-ba69-c63cbd5c6a64n%40googlegroups.com.
