It's v4.10.2 - my typo mistake.  I always use the latest release of weewx.  
I'll go with MQTT.

- Paul VE1DX

On Tuesday, October 10, 2023 at 9:51:28 PM UTC-3 Greg Troxel wrote:

> WindnFog <foc...@gmail.com> writes:
>
> > Given the somewhat erratic behaviour of the Raspberry Pi's 4's USB ports 
> > and the handshaking between weewx and the data console, I suspect what I 
> > want to do is impossible, but here's a shot in the dark. 
>
> +1 to vince's comments. USB should be ok if your power supply is
> adequate.
>
> > I'd like to "split" my USB data from a Vantage Vue console between my 
> > production weewx Pi 4 and a development Pi 4. weewx is working well 
> using 
> > the Simulator on my development Pi, but I want to feed it actual data 
> and 
> > use the Vantage driver. What would happen if I fed the Vantage Vue 
> console 
> > into a powered USB hub and then used two other ports as the data sources?
>
> This doesn't really make sense. USB is a two-way bus, with one
> originator (a computer) and some number of devices (serial ports,
> disks). The hub is plugged into the computer, making it act like it has
> more ports. You can't use a hub to put one serial adaptor on two
> computers.
>
> The two-way part means that the computer sends bytes to the console
> (really to the 6150USB data logger) and the console replies. So yes,
> you could fake up something where the bytes are proxied across and the
> other computer's commands go nowhere.
>
> But as people said, mqtt transmit is the way to go.
>
> Or, you can just move it to the development box for an hour, and then
> back. If the developemnt box doesn't clear the logger, the production
> one will fetch the old records and all will be ok.
>
> > Both systems are using weewx 4.1.2.
>
> That's old, but that's not relevant to this discussion.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/b430e904-dbcd-492c-91e8-9c26150c900dn%40googlegroups.com.

Reply via email to