i have pinged other IP address on my net work and the PI gets  response its 
only the GW1000 its have an issue with

On Sunday, 23 July 2023 at 12:51:15 UTC+1 [email protected] wrote:

> hi 
>
> from my weewx.confg
>
> [GW1000]
>     # This section is for the Ecowitt Gateway driver.
>     
>     # How often to poll the API, default is every 20 seconds:
>     poll_interval = 20
>     
>     # The driver to use:
>     driver = user.gw1000
>     ip_address = 192.168.1.248
>     port = 45000
>     [[field_map_extensions]]
>         extraTemp10 = temp10
>         wxSensor30 = light
>
> however you are correct its a network issue
>
> if i ping from my laptop
> C:\Windows\System32>ping 192.168.1.248
>
> Pinging 192.168.1.248 with 32 bytes of data:
> Reply from 192.168.1.248: bytes=32 time=5ms TTL=255
> Reply from 192.168.1.248: bytes=32 time=3ms TTL=255
> Reply from 192.168.1.248: bytes=32 time=3ms TTL=255
> Reply from 192.168.1.248: bytes=32 time=3ms TTL=255
>
> Ping statistics for 192.168.1.248:
>     Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
> Approximate round trip times in milli-seconds:
>     Minimum = 3ms, Maximum = 5ms, Average = 3ms
>
> if i ping from my PI
>
> pi@raspberrypiwx:~ $ ping -n 192.168.1.248
> PING 192.168.1.248 (192.168.1.248) 56(84) bytes of data.
> From 192.168.1.242 icmp_seq=1 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=2 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=3 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=4 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=5 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=6 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=7 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=8 Destination Host Unreachable
> From 192.168.1.242 icmp_seq=9 Destination Host Unreachable
>
>
> i have no idea why laptop can ping the GW1000 but my PI cant
>
> On Saturday, 22 July 2023 at 21:19:13 UTC+1 vince wrote:
>
>> Lets see your [GW1000] stanza from weewx.conf please.  If your 'gateway' 
>> address is 192.168.1.148 then it should look something like the following:
>>
>> [GW1000]
>>     ip_address = 192.168.1.148
>>     port = 45000
>>     poll_interval = 20
>>     driver = user.gw1000
>>
>> Your gateway should also respond to a ping from your weewx box.   Log 
>> into the weewx box and try "ping -n 192.168.1.148" and verify that you 
>> can get a response.
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/131679f4-e4fa-4c90-9baa-712b9cb14f70n%40googlegroups.com.

Reply via email to