Hi Gary Yes it sorted. Thx again.
Grtz Op ma 14 nov. 2022 21:15 schreef gjr80 <gjroder...@gmail.com>: > Did you sort the timezone issue mentioned previously? If so good, if not > you will need to expand on what is wrong. > > Gary > > On Tuesday, 15 November 2022 at 00:57:08 UTC+10 vanuxe...@gmail.com wrote: > >> All good now i will close this thread. >> Thank you. >> >> >> Op zo 13 nov. 2022 14:59 schreef Alex Vanuxem <vanuxe...@gmail.com>: >> >>> Succes! >>> >>> My path was incorrect , lol. >>> >>> One thing though weewxd is resetting everytime i run to utc time. >>> I need CET time. >>> >>> Can you tell me how? >>> >>> Thx a lot. It was a pain. But i am there. >>> Grtz >>> >>> Op zo 13 nov. 2022 13:28 schreef Alex Vanuxem <vanuxe...@gmail.com>: >>> >>>> Hi Gary, >>>> >>>> finally getting somewhere. >>>> i installed ubuntu server instead on virtual box, did the install again >>>> as correct as i can. >>>> >>>> in the ftp settings, i should have set the ip address instead of the >>>> name. >>>> in the log the system can connect to my host; >>>> but i see a lot of ftp errors. >>>> >>>> in attachment the log, but here an extract: >>>> >>>> 2022-11-13 12:17:19 weewx[2148] DEBUG weeutil.ftpupload: Attempting >>>> connection to 85.255.199.22 >>>> 2022-11-13 12:17:19 weewx[2148] DEBUG weeutil.ftpupload: Connected to >>>> 85.255.199.22 >>>> 2022-11-13 12:17:19 weewx[2148] DEBUG weeutil.ftpupload: 0 >>>> ./weekradiation.png >>>> e4e9d09c9a410af104aeb54059eb45247f7d51cf4f85a10f8be03d8e4b345f57 >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weeutil.ftpupload: Failed >>>> uploading /var/www/html/weewx/weekradiation.png to server 85.255.199.22. >>>> Reason: '553 Could not create file.' >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> ftpgenerator: (2): caught exception '<class 'ftplib.error_perm'>': 553 >>>> Could not create file. >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** Traceback (most recent call last): >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** File "/home/weewx/bin/weewx/reportengine.py", line 437, in run >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** n = ftp_data.run() >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** File "/home/weewx/bin/weeutil/ftpupload.py", line 220, in run >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** ftp_server.storbinary(stor_cmd, fd) >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** File "/usr/lib/python3.10/ftplib.py", line 498, in storbinary >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** with self.transfercmd(cmd, rest) as conn: >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** File "/usr/lib/python3.10/ftplib.py", line 393, in transfercmd >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** return self.ntransfercmd(cmd, rest)[0] >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** File "/usr/lib/python3.10/ftplib.py", line 359, in ntransfercmd >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** resp = self.sendcmd(cmd) >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** File "/usr/lib/python3.10/ftplib.py", line 281, in sendcmd >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** return self.getresp() >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** File "/usr/lib/python3.10/ftplib.py", line 254, in getresp >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** raise error_perm(resp) >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> **** ftplib.error_perm: 553 Could not create file. >>>> >>>> 2022-11-13 12:17:20 weewx[2148] ERROR weewx.reportengine: >>>> ftpgenerator: Upload failed >>>> 2022-11-13 12:17:20 weewx[2148] DEBUG weewx.reportengine: Report >>>> 'RSYNC' not enabled. Skipping. >>>> >>>> thank again!!! >>>> grtz >>>> >>>> alex >>>> >>>> >>>> Op zo 13 nov. 2022 om 11:03 schreef gjr80 <gjrod...@gmail.com>: >>>> >>>>> You should not need to install anything extra to use FTP, neither >>>>> should whether your website is https (or http) affect your FTP setup. The >>>>> path will need to be set correctly, but I would suggest that first you >>>>> need >>>>> to ensure that FTP is connecting and uploading to your web host without >>>>> error. >>>>> >>>>> You should setup the [StdReport] [[FTP]] stanza in weewx.conf as per >>>>> the requirements for your hosting service, ie user, password, server >>>>> etc. The [[FTP]] section >>>>> <http://weewx.com/docs/usersguide.htm#config_FTP> in the Users Guide >>>>> explains what each setting is for. Once you have the [[FTP]] stanza >>>>> set correctly locate the debug setting near the top of weewx.conf and >>>>> set it to debug = 1. Save weewx.conf and restart WeeWX. The log >>>>> should now show the FTP report being called and whether it was >>>>> successfully >>>>> generated or not. If there was an error it should be logged. If you cannot >>>>> work out from the log what the problem is, post a copy of the log here >>>>> showing the full WeeWX startup and the first couple of report cycles. >>>>> >>>>> Gary >>>>> >>>>> On Sunday, 13 November 2022 at 00:21:41 UTC+10 vanuxe...@gmail.com >>>>> wrote: >>>>> >>>>>> Thx again. >>>>>> >>>>>> Sorry for posting picture. >>>>>> I reinstalled everything, and since i am using a virtual box, i did >>>>>> the install according to the wiki for virtual environments. But i have >>>>>> the >>>>>> same issue. >>>>>> >>>>>> Used also now ' ' in my password, but no succes. >>>>>> >>>>>> No extra info in logs. >>>>>> >>>>>> Do i need to install any ftp program in linux to copy files to my >>>>>> website? >>>>>> >>>>>> Can it be because the server website is https? >>>>>> >>>>>> Also tried to set the path to my website as only /. >>>>>> >>>>>> Are there any software programs that can grab the files from weewx >>>>>> and copy them to my website? >>>>>> >>>>>> Feeding a little bit frustrated, but i keep trying... >>>>>> >>>>>> Thx >>>>>> >>>>>> Alex >>>>>> >>>>>> >>>>>> >>>>>> Op za 12 nov. 2022 07:09 schreef gjr80 <gjrod...@gmail.com>: >>>>>> >>>>>>> The 'sudo ./bin/weewxd' problem is likely because you were trying >>>>>>> to execute the command from a directory other than /home/weewx (or >>>>>>> wherever you installed WeeWX). A package install will add the >>>>>>> appropriate >>>>>>> WeeWX directories to your path so you can execute weewxd and the >>>>>>> WeeWX utilities from any directory. You have a setup.py install which >>>>>>> does >>>>>>> not make such additions to your path so you need to be cognisant of what >>>>>>> directory you are in and add paths to your commands as required. Best to >>>>>>> try using the full path: >>>>>>> >>>>>>> $ sudo /home/weewx/bin/weewxd >>>>>>> >>>>>>> 'sudo /etc/init.d/weewx' is likely working as it should as it >>>>>>> starts WeeWX as a daemon ie WeeWX is run in the background and does not >>>>>>> display anything on screen, you should just be returned to the prompt. >>>>>>> This >>>>>>> is exactly what I see in your start and startup2 captures (By the way, >>>>>>> please avoid posting screen captures as images if at all possible. It >>>>>>> makes >>>>>>> it very difficult for us to read, especially on mobile devices and where >>>>>>> output is across more than one screen. Most terminal programs allow you >>>>>>> to >>>>>>> scroll the screen and copy text which you can then paste/post. show you >>>>>>> do >>>>>>> this depends on the terminal program being used and the system you are >>>>>>> running it on). >>>>>>> >>>>>>> When you execute weewxd that is what we call running WeeWX >>>>>>> directly, when run directly WeeWX displays incoming loop packets and >>>>>>> archive records on the console/screen just as in your data capture. >>>>>>> Running >>>>>>> WeeWX directly is fine to testing/troubleshooting but in almost all >>>>>>> other >>>>>>> cases you will want to run WeeWX as a daemon. >>>>>>> >>>>>>> When you run WeeWX as a daemon try $ sudo /etc/init.d/weewx status >>>>>>> to see if WeeWX is running (or look at the log). >>>>>>> >>>>>>> Your syslog extract looks fine, WeeWX is running without error, >>>>>>> records are being saved to database and reports generated. However, >>>>>>> nothing >>>>>>> is being transferred to your web server. You either need to have WeeWX >>>>>>> do >>>>>>> the necessary transfers or arrange some other mechanism to do the >>>>>>> transfers. I would suggest having WeeWX take care of it. >>>>>>> >>>>>>> The weewx.conf you posted has the FTP and RSYNC reports enabled. >>>>>>> These reports are exactly what you need to transfer files to your web >>>>>>> server, but you should really only use one or the other. Rsync is more >>>>>>> secure and efficient than FTP but can be difficult to set up and is not >>>>>>> supported by all hosts. I would look at your hosting service and find >>>>>>> out >>>>>>> what file transfer protocols they support. Choose one and get that >>>>>>> running >>>>>>> under WeeWX. Disable the other in weewx.conf. >>>>>>> >>>>>>> Whilst both the RSYNC and FTP reports are enabled in the weewx.conf the >>>>>>> log extract you posted does not show either being run (self evident >>>>>>> entries >>>>>>> would appear in the log after the generation of the Seasons skin files). >>>>>>> Whenever you make changes to weewx.conf you need to stop/start or >>>>>>> restart WeeWX for the changes to take effect: >>>>>>> >>>>>>> $ sudo /etc/init.d/weewx restart >>>>>>> >>>>>>> Perhaps you did not do that? This would explain the debug = 0/debug >>>>>>> = 1 discrepancy. >>>>>>> >>>>>>> Sites are published to the WeeWX station map if there is a valid URL >>>>>>> at the [Station] station_url setting and [StdRESTful] >>>>>>> register_this_station is set to True in weewx.conf. It has nothing >>>>>>> to do with the availability or otherwise of your site or the presence of >>>>>>> website file on your WeeWX machine and/or web server. >>>>>>> >>>>>>> Gary >>>>>>> On Saturday, 12 November 2022 at 10:09:01 UTC+10 vanuxe...@gmail.com >>>>>>> wrote: >>>>>>> >>>>>>>> thank you Sir again for your answer, >>>>>>>> >>>>>>>> what i can tell you: >>>>>>>> sudo ./bin/weewxd doesn't work (not such file found, >>>>>>>> although present) >>>>>>>> and when I command sudo /etc/init.d/weewx start the terminal does >>>>>>>> nothing anymore forever, I only see the cursor blinking at the end of >>>>>>>> the >>>>>>>> command. >>>>>>>> >>>>>>>> only the command sudo weewxd works, i get files in the >>>>>>>> var/www/html/weewx folder >>>>>>>> >>>>>>>> i'm using filezilla to view it. >>>>>>>> >>>>>>>> the server i'm using is on a different machine, a server i >>>>>>>> subscribe too, it's the same company which provides with tv, wifi, >>>>>>>> phone, >>>>>>>> subscription. >>>>>>>> it's an apache server, which runs already 3 weather websites i made >>>>>>>> so far. >>>>>>>> >>>>>>>> when i log in through filezilla to my webpages the settings are : >>>>>>>> ftp protocol, use explicite ftp through tls if available, it's a unix >>>>>>>> server, and the folder is /wwwroot >>>>>>>> >>>>>>>> i see in the syslog file the debug is set to 0, while the debug is >>>>>>>> set to 1 in the config file?? >>>>>>>> i see that my website , although blank, is showing up on the weewx >>>>>>>> map for users, >>>>>>>> >>>>>>>> i've added some screenshots, syslog, and my conf file (weewx.txt >>>>>>>> below) with passwords removed. Is my configuration correct? Can you >>>>>>>> please >>>>>>>> have a peak? >>>>>>>> >>>>>>>> I hope that i've been as complete as possible, if you need >>>>>>>> anything else, please let me know? >>>>>>>> >>>>>>>> Thank you again sir, learning a lot !!! >>>>>>>> >>>>>>>> KR >>>>>>>> >>>>>>>> Alex >>>>>>>> >>>>>>>> >>>>>>>> Op vr 11 nov. 2022 om 22:50 schreef gjr80 <gjrod...@gmail.com>: >>>>>>>> >>>>>>>>> From what you describe it sounds like WeeWX has finished >>>>>>>>> downloading historical archive records and is now running normally. >>>>>>>>> Presence or absence of files on a website is a gross error check only >>>>>>>>> - you >>>>>>>>> can tell things are (likely) working or not working. To see exactly >>>>>>>>> what >>>>>>>>> your system/WeeWX is doing look at the log. If something doesn't work >>>>>>>>> - go >>>>>>>>> to the log. The tail command I gave you will show new log entries as >>>>>>>>> they >>>>>>>>> come in, but it only shows you log entries from the time you enter the >>>>>>>>> command. If you are using FileZilla to view generated files use it >>>>>>>>> (FileZilla) to open your log and scroll to the end, then scroll up to >>>>>>>>> where >>>>>>>>> WeeWX was last started, look for the WeeWX startup and history >>>>>>>>> download >>>>>>>>> from the logger, then you will see records being saved to archive >>>>>>>>> every >>>>>>>>> minute and reports being run. Are there any errors or reports being >>>>>>>>> skipped >>>>>>>>> that shouldn't? >>>>>>>>> >>>>>>>>> If WeeWX seems to be running error free then look at your web >>>>>>>>> server. Is is local (eg your WeeWX machine) or is it remote? If it is >>>>>>>>> a >>>>>>>>> different machine to that which runs WeeWX how are you transferring >>>>>>>>> the >>>>>>>>> WeeWX generated HTML files etc to the web server? Is WeeWX doing it - >>>>>>>>> in >>>>>>>>> which case look at the log, or are you doing it some other way? Are >>>>>>>>> the >>>>>>>>> files being transferred successfully? To the correct location? >>>>>>>>> >>>>>>>>> These are the sorts of things you need to look at, you need to >>>>>>>>> start with WeeWX and work through the data flow to your web server >>>>>>>>> verifying operation as you go. >>>>>>>>> >>>>>>>>> Gary >>>>>>>>> >>>>>>>>> On Saturday, 12 November 2022 at 07:36:12 UTC+10 >>>>>>>>> vanuxe...@gmail.com wrote: >>>>>>>>> >>>>>>>>>> Thx for your answer. >>>>>>>>>> I see now that I have reports in the var/html/www/weewx folder, >>>>>>>>>> updated every minute. I view this by logging in to the system through >>>>>>>>>> filezilla. >>>>>>>>>> This means the historica data download is already finished? >>>>>>>>>> >>>>>>>>>> The system is running now by the command sudo weewxd. >>>>>>>>>> >>>>>>>>>> On the terminal i see data being downloaden. >>>>>>>>>> >>>>>>>>>> I dont dare to stop it again. >>>>>>>>>> >>>>>>>>>> Should i be patient a little more, because nothing is to been >>>>>>>>>> seen on my website. >>>>>>>>>> >>>>>>>>>> Many thanks again, so glad i'm getting somewhere at last. >>>>>>>>>> >>>>>>>>>> Kr >>>>>>>>>> >>>>>>>>>> Alex >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Op vr 11 nov. 2022 22:00 schreef gjr80 <gjrod...@gmail.com>: >>>>>>>>>> >>>>>>>>>>> Your system appears to be running fine, the archive records >>>>>>>>>>> being downloaded are historical archive records that have been >>>>>>>>>>> saved in the >>>>>>>>>>> logger memory. The logger can store up to 2560 records, at a one >>>>>>>>>>> minute >>>>>>>>>>> archive that is some 40+ hours. Easiest thing is to start WeeWX and >>>>>>>>>>> let it >>>>>>>>>>> run to finish downloading the records from the logger (the log >>>>>>>>>>> extract you >>>>>>>>>>> provided showed a key press was used to exit WeeWX). Once the logger >>>>>>>>>>> history is downloaded WeeWX will download an archive record once >>>>>>>>>>> per minute >>>>>>>>>>> and then generate the reports/output. >>>>>>>>>>> >>>>>>>>>>> You might want to start another terminal screen and monitor the >>>>>>>>>>> WeeWX log with something like: >>>>>>>>>>> >>>>>>>>>>> $ tail -f /var/log/syslog >>>>>>>>>>> >>>>>>>>>>> This way you can monitor the log output and see exactly what >>>>>>>>>>> WeeWX is doing. >>>>>>>>>>> >>>>>>>>>>> Gary >>>>>>>>>>> >>>>>>>>>>> On Saturday, 12 November 2022 at 05:18:49 UTC+10 >>>>>>>>>>> vanuxe...@gmail.com wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi Sirs, >>>>>>>>>>>> >>>>>>>>>>>> So after a lot of time fiddling about, I made some progress but >>>>>>>>>>>> nearly there. >>>>>>>>>>>> I'm using >>>>>>>>>>>> windows 11 pro version 22H2 >>>>>>>>>>>> virtual box 7.0 >>>>>>>>>>>> ubuntu 20 >>>>>>>>>>>> and filezilla to view the ubuntu host dir >>>>>>>>>>>> the ubuntu vm is bridged through virtual box to my windows pc >>>>>>>>>>>> >>>>>>>>>>>> problem is : when i start sudo weexd i get data in from from my >>>>>>>>>>>> vantage (ethernet ip), and stored in the db, but nothing in >>>>>>>>>>>> /var/www/html/weewx/ nor to my website. >>>>>>>>>>>> >>>>>>>>>>>> when i start the sudo /etc/init.d/weewx the service is started >>>>>>>>>>>> but immediately stopped, i get an exit code >>>>>>>>>>>> >>>>>>>>>>>> in attchement the full syslog >>>>>>>>>>>> >>>>>>>>>>>> can somebody please point me in the correct dirrection? >>>>>>>>>>>> I'm not an expert in linux (yet), but i've learned a massive >>>>>>>>>>>> but already . >>>>>>>>>>>> tank you Sirs! >>>>>>>>>>>> KR >>>>>>>>>>>> Alex >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/f8c0839f-f9bc-4837-a63d-3b0c585be514n%40googlegroups.com >>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/f8c0839f-f9bc-4837-a63d-3b0c585be514n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/weewx-user/ef5065eb-800b-4a2a-9005-3344f5bae888n%40googlegroups.com >>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/ef5065eb-800b-4a2a-9005-3344f5bae888n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/e5746d92-d04b-49e9-b65e-43f3ab319ac9n%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/weewx-user/e5746d92-d04b-49e9-b65e-43f3ab319ac9n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/5f6eda11-5588-4543-bfbc-a79da7af1153n%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/5f6eda11-5588-4543-bfbc-a79da7af1153n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/99ac980b-e0b1-4568-b52b-099d6eca7141n%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/99ac980b-e0b1-4568-b52b-099d6eca7141n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAHaYyoJxt5RE0eSz0HeSuSG8J5k%2BAWGiu0KZmH%2BRQfv4RtiHYA%40mail.gmail.com.
