i have weewx running on linux, it's been going fine for a while (recently switched from wview to weewx 4.8.0). i configured weewx to write to mysql (localhost) which has been working just fine as well... up until yesterday.
i needed to unplug the server where weewx is running, it was powered off for about 30 minutes. the weather station (a davis vantage pro 2) was also powered off during this time. upon restarting the server and power station, weewx reports no errors in the logs, however isn't archiving any data from the vantage. i tried upgrading to 4.9.1, same experience - no data being updated, no data being written to the database. i then tried pointing it to sqlite, and same, no data written. i then did a fresh install of weewx 4.9.1 to a new directory, configured, it and ran with the defaults. it sees the weather station, reads data from it's logs, however only up to the point where the server and power station were powered off. all data since is not read, as if it's not there. the weather station console shows the current conditions, and the output of weewxd when run from the command line shows the loop process getting updated data with every read - the output changes as the temperature changes, etc... here is the syslog entry when i startup weewx (this is it, i have tried various debug settings and nothing provides more info): Nov 13 17:46:31 bonobo INFO __main__: Initializing weewx version 4.9.1 Nov 13 17:46:31 bonobo INFO __main__: Using Python 3.10.8 (main, Nov 6 2022, 16:41:24) [GCC 11.3.0] Nov 13 17:46:31 bonobo INFO __main__: Located at /usr/lib/python-exec/python3.10/python Nov 13 17:46:31 bonobo INFO __main__: Platform Linux-5.15.75-gentoo-x86_64-Intel-R-_Xeon-R-_CPU_X5675_@_3.07GHz-with-glibc2.35 Nov 13 17:46:31 bonobo INFO __main__: Locale is 'LC_CTYPE=en_US.UTF-8;LC_NUMERIC=en_US.UTF-8;LC_TIME=en_US.UTF-8;LC_COLLATE=C;LC_MONETARY=en_US.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=en_US.UTF-8;LC_NAME=en_US.UTF-8;LC_ADDRESS=en_US.UTF-8;LC_TELEPHONE=en_US.UTF-8;LC_MEASUREMENT=en_US.UTF-8;LC_IDENTIFICATION=en_US.UTF-8' Nov 13 17:46:31 bonobo INFO __main__: Using configuration file /home/weewx/weewx.conf Nov 13 17:46:31 bonobo INFO __main__: Debug is 9 Nov 13 17:46:31 bonobo INFO __main__: PID file is /var/run/weewx.pid Nov 13 17:46:31 bonobo INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage) Nov 13 17:46:31 bonobo INFO weewx.engine: StdConvert target unit is 0x1 Nov 13 17:46:31 bonobo INFO weewx.wxservices: StdWXCalculate will use data binding wx_binding Nov 13 17:46:31 bonobo INFO weewx.engine: Archive will use data binding wx_binding Nov 13 17:46:31 bonobo INFO weewx.engine: Record generation will be attempted in 'hardware' Nov 13 17:46:31 bonobo INFO weewx.engine: Using archive interval of 300 seconds (specified by hardware) Nov 13 17:46:31 bonobo INFO weewx.restx: StationRegistry: Registration not requested. Nov 13 17:46:31 bonobo INFO weewx.restx: Wunderground: Posting not enabled. Nov 13 17:46:31 bonobo INFO weewx.restx: PWSweather: Posting not enabled. Nov 13 17:46:31 bonobo INFO weewx.restx: CWOP: Posting not enabled. Nov 13 17:46:31 bonobo INFO weewx.restx: WOW: Posting not enabled. Nov 13 17:46:31 bonobo INFO weewx.restx: AWEKAS: Posting not enabled. Nov 13 17:46:31 bonobo INFO weewx.engine: 'pyephem' detected, extended almanac data is available Nov 13 17:46:31 bonobo INFO __main__: Starting up weewx version 4.9.1 Nov 13 17:46:31 bonobo INFO weewx.engine: Clock error is -0.65 seconds (positive is fast) Nov 13 17:46:31 bonobo INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb' Nov 13 17:46:31 bonobo INFO weewx.manager: Starting backfill of daily summaries Nov 13 17:46:31 bonobo INFO weewx.manager: Daily summaries up to date Nov 13 17:46:32 bonobo INFO weewx.engine: Starting main packet loop. here is example output of weewxd when run from the command line (outTemp changes as the outside temp changes, as do other values): LOOP: 2022-11-13 17:45:37 PST (1668390337) 'altimeter': 'None', 'appTemp': '38.56302017901965', 'barometer': '30.314', 'cloudbase': '1242.8075512152234', 'consBatteryVoltage': '4.82', 'dateTime': '1668390337', 'dayET': '0.009', 'dayRain': '0.0', 'dewpoint': '36.631246774653015', 'ET': 'None', 'extraAlarm1': '0', 'extraAlarm2': '0', 'extraAlarm3': '0', 'extraAlarm4': '0', 'extraAlarm5': '0', 'extraAlarm6': '0', 'extraAlarm7': '0', 'extraAlarm8': '0', 'extraHumid1': '51.0', 'extraTemp1': '68.0', 'forecastIcon': '6', 'forecastRule': '9', 'heatindex': '39.141000000000005', 'humidex': '41.4', 'inDewpoint': '47.9178951288807', 'inHumidity': '37.0', 'insideAlarm': '0', 'inTemp': '76.1', 'maxSolarRad': '0.0', 'monthET': '0.14', 'monthRain': '0.66', 'outHumidity': '83.0', 'outsideAlarm1': '0', 'outsideAlarm2': '0', 'outTemp': '41.4', 'pressure': 'None', 'radiation': '0.0', 'rain': '0.0', 'rainAlarm': '0', 'rainRate': '0.0', 'soilLeafAlarm1': '0', 'soilLeafAlarm2': '0', 'soilLeafAlarm3': '0', 'soilLeafAlarm4': '0', 'stormRain': '0.0', 'sunrise': '1668355620', 'sunset': '1668390180', 'txBatteryStatus': '0', 'usUnits': '1', 'windchill': '41.4', 'windDir': 'None', 'windGust': '0.0', 'windGustDir': 'None', 'windrun': 'None', 'windSpeed': '0.0', 'windSpeed10': '0.0', 'yearET': '16.43', 'yearRain': '2.09' i'm at a loss as to what is happening. it was working fine, rebooted, and it doesn't collect data any more. i have rebooted since moving to weewx and things were fine. main difference this time is the weather station was powered down. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/28a4f390-101f-45ac-8f07-ee0a3afc91cdn%40googlegroups.com.
