/etc/init.d/weewx start
Starting weewx (via systemctl): weewx.service.
willie@willie-ThinkPad-X131e:~$ sudo tail -f /var/log/syslog
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** self.port.openPort()
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** File "/usr/share/weewx/weewx/drivers/vantage.py", line 305, in
openPort
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** self.serial_port = serial.Serial(self.port, self.baudrate,
timeout=self.timeout)
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** File "/usr/lib/python3/dist-packages/serial/serialutil.py", line
240, in __init__
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** self.open()
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** File "/usr/lib/python3/dist-packages/serial/serialposix.py", line
268, in open
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** raise SerialException(msg.errno, "could not open port {}:
{}".format(self._port, msg))
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL weewx.engine:
**** serial.serialutil.SerialException: [Errno 2] could not open port
/dev/vpro: [Errno 2] No such file or directory: '/dev/vpro'
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL __main__:
Unable to load driver: [Errno 2] could not open port /dev/vpro: [Errno 2]
No such file or directory: '/dev/vpro'
Nov 10 19:27:07 willie-ThinkPad-X131e weewx[12859] CRITICAL __main__:
**** Exiting...
Nov 10 19:30:01 willie-ThinkPad-X131e CRON[12900]: (root) CMD ([ -x
/etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then
/usr/sbin/invoke-rc.d anacron start >/dev/null; fi)
On Thursday, November 10, 2022 at 4:39:02 PM UTC-6 vince wrote:
> If you're on the latest version (you didn't say), you should set debug=1
> in weewx.conf, restart weewx, and post a longer log extract here so others
> can look at the debugging output.
>
> Your tail -f is too short, you want to show from the time weewx starts
> through one archive period at least. Perhaps add the -n 200 switch to
> your tail command to try to catch more lines if you're not comfortable with
> the command line.
>
>
> On Thursday, November 10, 2022 at 2:22:27 PM UTC-8 timwill...@gmail.com
> wrote:
>
>> IThanks vince, t's the /dev/ttyUSB0 so I edited my weewx config to
>> /dev/ttyUSB0 :
>> If the connection type is serial, a port must be specified:
>> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
>> # /dev/ttyUSB0 is a common USB port name
>> # /dev/ttyS0 is a common serial port name
>> # BSD:
>> # /dev/cuaU0 is a common serial port name
>> port = /dev/ttyUSB0
>>
>> - And restarted then looked at log . Still wont run weewx .Log says it
>> can't open vantage console: At least now weewx is attempting to run .
>>
>> $ sudo tail -f /var/log/syslog
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9058] INFO __main__: Using
>> Python 3.8.10 (default, Jun 22 2022, 20:18:18) #012[GCC 9.4.0]
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9058] INFO __main__: Located
>> at /usr/bin/python3
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9058] INFO __main__: Platform
>> Linux-5.4.0-131-generic-x86_64-with-glibc2.29
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9058] INFO __main__: Locale
>> is 'en_US.UTF-8'
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9058] INFO __main__: Using
>> configuration file /etc/weewx/weewx.conf
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9058] INFO __main__: Debug is
>> 0
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9058] INFO __main__: PID file
>> is /var/run/weewx.pid
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9062] INFO weewx.engine:
>> Loading station type Vantage (weewx.drivers.vantage)
>> Nov 10 16:11:13 willie-ThinkPad-X131e weewx[9037]: ...done.
>> Nov 10 16:11:13 willie-ThinkPad-X131e systemd[1]: Started LSB: weewx
>> weather system.
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] ERROR
>> weewx.drivers.vantage: Unable to wake up Vantage console
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] ERROR weewx.engine:
>> Import of driver failed: Unable to wake up Vantage console (<class
>> 'weewx.WakeupError'>)
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** Traceback (most recent call last):
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** File "/usr/share/weewx/weewx/engine.py", line 119, in
>> setupStation
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** self.console = loader_function(config_dict, self)
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 40, in
>> loader
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** return VantageService(engine, config_dict)
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1939, in
>> __init__
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** Vantage.__init__(self, **config_dict[DRIVER_NAME])
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 521, in
>> __init__
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** self._setup()
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1340, in
>> _setup
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** self.port.wakeup_console(max_tries=self.max_tries)
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 118, in
>> wakeup_console
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** raise weewx.WakeupError("Unable to wake up Vantage console")
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL weewx.engine:
>> **** weewx.WakeupError: Unable to wake up Vantage console
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL __main__:
>> Unable to load driver: Unable to wake up Vantage console
>> Nov 10 16:11:34 willie-ThinkPad-X131e weewx[9062] CRITICAL __main__:
>> **** Exiting...
>>
>>
>> On Thursday, November 10, 2022 at 3:34:49 PM UTC-6 vince wrote:
>>
>>> How is your vue connected to the laptop ?
>>>
>>> If it is a Davis USB data logger 'or' a serial logger+serial/usb
>>> adaptor, The usual device for a modern Linux is /dev/ttyUSB0 and there are
>>> a couple ways to figure that out.
>>>
>>> One way is to run 'dmesg' and look at the output. On my pi4 here it
>>> would include:
>>> [ 6.515632] pl2303 1-1.3:1.0: pl2303 converter detected
>>> [ 6.533119] usb 1-1.3: pl2303 converter now attached to ttyUSB0
>>>
>>> That's my serial2USB adaptor that the Vantage serial logger is connected
>>> to. Note the 'ttyUSB0' which shows that /dev/ttyUSB0 is the device for my
>>> setup here, if that helps any.
>>>
>>> Running 'lsusb' will show you what USB devices are connected to the box:
>>> pi@pi4:~ $ lsusb
>>> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>>> Bus 001 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
>>> Port / Mobile Action MA-8910P
>>> Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>
>>> Note bus 001 device 003 matches up with the "usb 1-1.3" from the dmesg
>>> command.
>>>
>>> If you don't see anything connected you might try disconnecting and
>>> reconnecting your console from the computer (assuming it's USB) and the
>>> dmesg command should show that happening.
>>>
>>> But it's likely /dev/ttyUSB0 that you want...
>>>
>>> On Thursday, November 10, 2022 at 1:04:34 PM UTC-8 timwill...@gmail.com
>>> wrote:
>>>
>>>>
>>>> I ment to say I used port stting the first time using /dev/ttyUSB0
>>>> not /dev/ttyS0.. thanks
>>>>
>>>> On Thursday, November 10, 2022 at 2:41:06 PM UTC-6 Tim Williams wrote:
>>>> I'm trying to run my vantage vue on my Laptop with Linux mint 20.3 to
>>>> save elec energy but I am so new at this it is frustrating . so please be
>>>> patient with this newbe ....thanks :)
>>>> I corrected duplicate lLattitude and Longitude and then restarted
>>>> weewx but still no luck . Seems to be something to do with my port
>>>> setting
>>>> as this log indicated. At first stopped weewx and edited con.. I chose the
>>>> /dev/ttyS0 and restarted weewx..log critical errors on the port setting.
>>>> So I edited weewx again this time using the serial port /dev/ttyS0. And
>>>> the
>>>> log shows critical error again. What am I doing wrong?
>>>> On Thursday, November 10, 2022 at 2:41:06 PM UTC-6 Tim Williams wrote:
>>>>
>>>>> I'm trying to run my vantage vue on my Laptop with Linux mint 20.3 to
>>>>> save elec energy but I am so new at this it is frustrating . so please be
>>>>> patient with this newbe ....thanks :)
>>>>> I corrected duplicate lLattitude and Longitude and then restarted
>>>>> weewx but still no luck . Seems to be something to do with my port
>>>>> setting
>>>>> as this log indicated. At first stopped weewx and edited con.. I chose
>>>>> the
>>>>> /dev/ttyS0 and restarted weewx..log critical errors on the port setting.
>>>>> So I edited weewx again this time using the serial port /dev/ttyS0. And
>>>>> the
>>>>> log shows critical error again. What am I doing wrong?
>>>>>
>>>>>
>>>>> weewx[7330] CRITICAL weewx.engine: **** raise
>>>>> SerialException("Could not configure port: {}".format(msg))
>>>>> Nov 10 13:53:44 willie-ThinkPad-X131e weewx[7330] CRITICAL
>>>>> weewx.engine: **** serial.serialutil.SerialException: Could not
>>>>> configure port: (5, 'Input/output error')
>>>>> Nov 10 13:53:44 willie-ThinkPad-X131e weewx[7330] CRITICAL __main__:
>>>>> Unable to load driver: Could not configure port: (5, 'Input/output error')
>>>>> Nov 10 13:53:44 willie-ThinkPad-X131e weewx[7330] CRITICAL __main__:
>>>>> **** Exiting...
>>>>>
>>>>> On Thursday, November 10, 2022 at 1:28:23 PM UTC-6 Tim Williams wrote:
>>>>>
>>>>>> ThanYk forresponce, Yes it is doubled . How do you fix it?
>>>>>> # Description of the station location
>>>>>> location = "SDora"
>>>>>>
>>>>>> # Latitude in decimal degrees. Negative for southern hemisphere
>>>>>> latitude = 36.7680 -92.2672
>>>>>> # Longitude in decimal degrees. Negative for western hemisphere.
>>>>>> longitude = 36.7680 -92.2672
>>>>>>
>>>>>> # Altitude of the station, with the unit it is in. This is used
>>>>>> only
>>>>>> # if the hardware cannot supply a value.
>>>>>> altitude = 951, foot
>>>>>>
>>>>>> # Set to type of station hardware. There must be a corresponding
>>>>>> stanza
>>>>>> # in this file, which includes a value for the 'driver' option.
>>>>>> station_type = Vantage
>>>>>>
>>>>>> # If you have a website, you may specify an URL. This is required
>>>>>> if you
>>>>>> # intend to register your station.
>>>>>> #station_url = http://www.example.com
>>>>>>
>>>>>> # The start of the rain year (1=January; 10=October, etc.). This
>>>>>> is
>>>>>> # downloaded from the station if the hardware supports it.
>>>>>> rain_year_start = 1
>>>>>>
>>>>>> # Start of week (0=Monday, 6=Sunday)
>>>>>> week_start = 6
>>>>>>
>>>>>> ########################################
>>>>>>
>>>>>> On Thursday, November 10, 2022 at 12:55:17 PM UTC-6 vince wrote:
>>>>>>
>>>>>>> Lets see your latitude and longitude lines in weewx.conf
>>>>>>> I suspect you have two numbers on the latitude line...
>>>>>>>
>>>>>>> On Thursday, November 10, 2022 at 10:51:40 AM UTC-8
>>>>>>> timwill...@gmail.com wrote:
>>>>>>>
>>>>>>>> Hi to all, For what ever reason weewx will not work after
>>>>>>>> installing via the instructions here:
>>>>>>>> https://www.weewx.com/docs/debian.htm As a nwbe to weewx and
>>>>>>>> linux so all help is appreciated Thanks
>>>>>>>>
>>>>>>>> Here is what I get on the log report:
>>>>>>>>
>>>>>>>> Here is what I get on the log report:
>>>>>>>>
>>>>>>>> sudo tail -f /var/log/syslog
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** could not convert string to float: '36.7680
>>>>>>>> -92.2672'
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** Traceback (most recent call last):
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** File "/usr/share/weewx/weewxd", line 148, in main
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** engine = weewx.engine.StdEngine(config_dict)
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** File "/usr/share/weewx/weewx/engine.py", line
>>>>>>>> 84, in
>>>>>>>> __init__
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** self.stn_info =
>>>>>>>> weewx.station.StationInfo(self.console, **config_dict['Station'])
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** File "/usr/share/weewx/weewx/station.py", line
>>>>>>>> 51, in
>>>>>>>> __init__
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** self.latitude_f =
>>>>>>>> float(stn_dict['latitude'])
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** ValueError: could not convert string to float:
>>>>>>>> '36.7680
>>>>>>>> -92.2672'
>>>>>>>> Nov 10 12:49:13 willie-ThinkPad-X131e weewx[5225] CRITICAL
>>>>>>>> __main__: **** Exiting.
>>>>>>>>
>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/c938dc92-90b0-4adf-ba65-c26d38eba95en%40googlegroups.com.
