Almost every single time. Not 100% but pretty close.
- I put the 4.9.1 driver on my working 4.8.0 system, deleted the
__pycache__ file for it, and started weewx up and it 'did' recreate the
problem. Failed immediately and kept failing.
- I also repeated the test with the extra sensors stuff set to { } and
it didn't fix it. So I'm guessing it's the issue-772 mods are at fault.
If you can get me a driver with issue-772 backed out or with more
diagnostic logging etc added I'd be happy to do more tests to try to figure
it out.
Lastly, FWIW, I'm running a VP2 with rather old firmware, if that matters.
Davis Vantage EEPROM settings:
CONSOLE TYPE: Vantage Pro2
CONSOLE FIRMWARE:
Date: Jul 14 2008
Version: 1.80
CONSOLE SETTINGS:
Archive interval: 300 (seconds)
Altitude: 365 (foot)
Wind cup type: large
Rain bucket type: 0.01 inches
Rain year start: 10
Onboard time: 2022-10-26 15:10:05
CONSOLE DISPLAY UNITS:
Barometer: inHg
Temperature: degree_F
Rain: inch
Wind: mile_per_hour
CONSOLE STATION INFO:
Latitude (onboard): +47.3
Longitude (onboard): -122.3
Use manual or auto DST? AUTO
DST setting: N/A
Use GMT offset or zone code? GMT_OFFSET
Time zone code: N/A
GMT offset: -8.0 hours
Temperature logging: LAST
Retransmit channel: OFF (0)
TRANSMITTERS:
Channel Receive Repeater Type
1 active none iss
2 inactive none (N/A)
3 inactive none (N/A)
4 inactive none (N/A)
5 inactive none (N/A)
6 inactive none (N/A)
7 inactive none (N/A)
8 inactive none (N/A)
RECEPTION STATS:
Total packets received: 255
Total packets missed: 3
Number of resynchronizations: 0
Longest good stretch: 122
Number of CRC errors: 0
BAROMETER CALIBRATION DATA:
Current barometer reading: 30.130 inHg
Altitude: 365 feet
Dew point: 44 F
Virtual temperature: 46 F
Humidity correction factor: 1.9
Correction ratio: 1.014
Correction constant: +0.000 inHg
Gain: 0.000
Offset: 35.000
OFFSETS:
Wind direction: +0 deg
Inside Temperature: +0.0 F
Inside Humidity: +0 %
Outside Temperature: +0.0 F
Outside Humidity: +0 %
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/87a9b91d-265d-4c51-9fcf-4d8c7370a3dfn%40googlegroups.com.
