Are you talking about interfacing the EMR211 console , which is bluetooth, or the remote sensor THN132N which is 433MHz.
Someone wrote a driver to interface a bluetooth enabled wx station. This might provide some insight. https://github.com/daduke/ventusw820 On Saturday, August 20, 2022 at 6:13:47 PM UTC-4 es...@ieee.org wrote: > I'm working on the dosc but if I can't recive from the EMR211 there won't > be anything to view and reading the docs may or may not answer my question. > I know that I won't know for sure until I've read every scrap but that's a > lot of effort for an uncertain result. > > Thanks > > On Saturday, August 20, 2022 at 2:24:29 PM UTC-7 storm...@gmail.com wrote: > >> You can view web pages locally and/or upload to a web host. Did you read >> through the documents: >> >> https://weewx.com/docs.html >> >> On Saturday, August 20, 2022 at 4:49:08 PM UTC-4 es...@ieee.org wrote: >> >>> Hello, >>> I just discovered this site. I have a project and would appreciate help >>> in understanding whether weewx would work. >>> >>> I have an oregon scientific EMR211 outdoor thermometer. I also have >>> 433mhz receiver modules, an rtl-sdr (not used yet) and raspberry pi's. I >>> have been able to connect a receiver module to a logic analyzer and decode >>> the signal with PulseView using the manchester/oregon decoder. I'm getting >>> temps and battery status messages. >>> >>> I have tried to decode this on an esp8266 with some posted python code >>> but one is not designed to generate output :( and the other displays values >>> that are all over the map (like negative temps). So I need a >>> different/better approach. >>> >>> I see that there is support for a number of Oregon Scientific products >>> and I'm guessing that many of them transmit on 433 withe the same protocol. >>> Is it possible to connect any of this to weewx so that I could make the >>> temps viewable in a web browser? >>> >>> Help would be appreciated >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a5ba82b1-73c2-4eba-aa28-0e45479d77a7n%40googlegroups.com.
