Yes! That did it! Where did you did the doc on this. I search for what parameters were available to the MQTT module and couldn't find anything!
Le samedi 9 avril 2022 à 17 h 19 min 50 s UTC-4, [email protected] a écrit : > Try adding the following: > > [[MQTT]] > server_url = mqtt://username:password@host:1883/ > topic = weather # > unit_system = US > binding = archive, loop > aggregation = aggregate > log_success = false > log_failure = true > > On Saturday, April 9, 2022 at 3:50:46 PM UTC-4 [email protected] wrote: > >> Must I do something special to push the LOOP records more frequently >> through MQTT? I've imported the Paho MQTT Python library and the loop >> record is being pushed at the ARCHIVE interval, which is also confirmed >> with MQTT Explorer. I've seen timestamp of 15:45:27, 15:40:10, 15:35:29 and >> 15:30:20 for the 'acurite/loop' topic. This is what I have in the >> weewx.conf file for MQTT >> >> [[MQTT]] >> server_url = mqtt://username:password@hostname:1883/ >> topic = acurite >> unit_system = METRIC >> retain = true >> >> Is there something missing? >> >> Thanks for your help >> >> Le samedi 9 avril 2022 à 07 h 20 min 13 s UTC-4, [email protected] a >> écrit : >> >>> have you considered MQTT? You could setup the MQTT WeeWX Extension in >>> which it will push both LOOP and ARCHIVE records to a MQTT broker. I have >>> an Acurite 5-n-1 weather station and use MQTT to update my website as the >>> LOOP data changes. I get updates around every 18 seconds or so. >>> >>> In your Python program, you use Paho Python library to "subscribe" to >>> your MQTT host and invoke an event when you get a LOOP Record. From there >>> evaluate the rain values and take action with your car windows at that >>> moment based on the data. >>> >>> MQTT is a small, lightweight protocol that will update in near real >>> time. It is used a lot in IOT devices. >>> >>> >>> On Saturday, April 9, 2022 at 2:31:03 AM UTC-4 Graham Eddy wrote: >>> >>>> your Acurite driver creates a ‘loop packet’ each time it receives a >>>> reading from the station. you can have a ’service’ immediately export >>>> selected data from each loop packet, not wait until the end of the archive >>>> interval (which is when database is updated). depending how you want the >>>> data exported, there could be an existing service extension available >>>> off-the-shelf >>>> >>>> On 9 Apr 2022, at 3:23 pm, Sylvain Gagnon <[email protected]> wrote: >>>> >>>> Hi, I've been using WeeWx for many years now but first time posting >>>> here. >>>> >>>> I'm writing a program in Python that queries my Acurite 5 in 1 probe >>>> through WeeWX for the rain rate and if it's above 0mm, then it will close >>>> the car windows if they are opened and the car is parked. It works well >>>> but >>>> relies on daily.json to fetch the rain rate and that value I believe >>>> updates at the archive frequency (ie, 5 minutes) but the stations sends >>>> that data every 36 seconds. Is there a way to fetch this value? The only >>>> other option that I can think of is to set the "archive_interval" to 60 >>>> instead of 300 in [StdArchive]. If I do that, will that mess up all the >>>> historical data already in the database? Any other side effects? >>>> >>>> Thanks for your help at keeping the inside of my car dry :-) >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/c90fb5b9-f691-4024-a00f-ab55a340fb04n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/c90fb5b9-f691-4024-a00f-ab55a340fb04n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e2b9d1f9-5dcc-47c6-94ed-e2390cbe6471n%40googlegroups.com.
