Thank you for the clarification. On Tuesday, February 22, 2022 at 7:43:22 PM UTC+1 tke...@gmail.com wrote:
> The accumulators for windDir and windGustDir are useless. If the wind > blows at 359° for an hour, then 1° for an hour, the windDir accumulator > would return 180°. They are there only because it's easiest to just create > an accumulator for everything. > > Same with the daily summaries for windDir and windGustDir: worthless. > > What you want is held in the accumulator for the vector quantity 'wind', > where wind is treated as a true vector. It includes attributes max and > max_dir, which holds the max wind speed seen and its direction, > respectively. > > The equivalent in the database for daily summaries is held in > archive_day_wind. There, you can calculate the average wind (from wsum and > sumtime), average vector wind direction (from xsum and ysum), max gust > (from max), as well as the direction of the max gust (from max_dir). This > is all taken care of for you if you use the tag $wind. > > Hope I got a little closer to answering your questions! > > On Tue, Feb 22, 2022 at 7:52 AM Aslak Vaa <asla...@gmail.com> wrote: > >> Sorry, that was not my intended question. >> My issue is that I see wind speed and direction as a pair of values for >> any given time. When we speak of max wind, I am interested of the speed of >> wind and its direction at that time. The speed is the main issue, and >> direction is an attribute to the speed. >> This applies both to windSpeed and windGust. >> This might be solved removing the accumulation tables for windDir and >> windGustDir, and adding directions to accumulation tables for windSpeed and >> windGust both for min and max values of wind speed. >> I have not looked into the possibility that there may be other groups of >> information that may have a similar need of handling. >> I see that this may break the accumulation scheme. >> So, yes, for the moment I think you are correct in seeing the case as a >> feature. >> >> >> >> On Tuesday, February 22, 2022 at 3:04:51 PM UTC+1 tke...@gmail.com wrote: >> >>> LOL! Well, I guess you could say it's a feature. >>> >>> max in archive_day_windSpeed is the maximum value seen for 'windSpeed'. >>> max in archive_day_windGust is the maximum value seen for 'windGust'. >>> >>> They are not necessarily the same because archived windSpeed is >>> typically the average wind seen over an archive interval. By contrast, >>> archived windGust is the max wind seen over an archive interval. >>> >>> Hope that's what you're looking for. >>> >>> On Tue, Feb 22, 2022 at 4:55 AM Aslak Vaa <asla...@gmail.com> wrote: >>> >>>> The enclosed file was not correct in my last reply. >>>> Please see this new file. >>>> >>>> Best Regards, Aslak >>>> >>>> On Tuesday, February 22, 2022 at 1:47:36 PM UTC+1 Aslak Vaa wrote: >>>> >>>>> I have installed your last update, and I will keep an eye on the >>>>> results for the next days. Thank you for following up the issue. >>>>> >>>>> However, I performed queries from the accumulator tables for >>>>> windSpeed, windDir, windGust and windGustDir. The mintime/maxtime for >>>>> wind >>>>> and direction are unequal both for windSpeed/windDir and >>>>> windGust/windGustDir min/max values. >>>>> I expected that the min/max values of windDir/windGustDir should be >>>>> the values at the same mintime/maxtime as the corresponding min/max for >>>>> windSpeed/windGust values. This is not the case. >>>>> Is this an error or a feature? >>>>> Please find queries and results in enclosed file. >>>>> >>>>> Best Regards, Aslak >>>>> >>>>> On Tuesday, February 22, 2022 at 12:20:53 AM UTC+1 tke...@gmail.com >>>>> wrote: >>>>> >>>>>> Upon reflection, I really didn't like the solution I posted earlier. >>>>>> The reality is that for stations that do not supply windGustDir, such as >>>>>> the Fine Offset stations, weewx was calculating a substitute just fine: >>>>>> the >>>>>> vector average of the wind over an archive period was being extracted >>>>>> from >>>>>> the accumulators. The problem is that because of the peculiarities of >>>>>> how >>>>>> WXXTypes was set up, it was forcing windGustDir to None if windGustDir >>>>>> was >>>>>> missing, which caused the calculated value not to get substituted. Then >>>>>> I >>>>>> supplied a band-aid over this by substituting windDir instead. >>>>>> >>>>>> A mess. >>>>>> >>>>>> With commit 244a7f8 >>>>>> <https://github.com/weewx/weewx/commit/244a7f8c694dd807e891b956f96a53590c9c0f46>, >>>>>> >>>>>> I've changed this to do nothing in WXXTypes if windGustDir is missing. >>>>>> This >>>>>> causes a value to be successfully extracted from the accumulators. >>>>>> >>>>>> A long-winded way to say that I think the new solution is a better, >>>>>> more accurate one. >>>>>> >>>>>> If you're comfortable using git, I'd appreciate it if one of you FO >>>>>> owners could give it a try. >>>>>> >>>>>> -tk >>>>>> >>>>>> >>>>>> >>>>>> On Mon, Feb 14, 2022 at 3:46 AM paul...@gmail.com < >>>>>> paulea...@gmail.com> wrote: >>>>>> >>>>>>> Checked this morning and pleased to say Max Wind direction is now >>>>>>> reporting and updating in the Day tab of the Statistics section. Still >>>>>>> N/A >>>>>>> in Week but I'm guessing it will update in due course. >>>>>>> Just out of interest I've noticed in the Statistics section the Year >>>>>>> tab is blue and if you click on it you get the option of Year or Rain >>>>>>> Year. >>>>>>> What actually is the difference between these two? In my case the >>>>>>> values >>>>>>> reported are identical. >>>>>>> Paul >>>>>>> >>>>>>> On Sunday, 13 February 2022 at 20:01:25 UTC remy.l...@gmail.com >>>>>>> wrote: >>>>>>> >>>>>>>> Yes, it’s the good python file, same as me (if standard >>>>>>>> installation...) >>>>>>>> The Tom’s update/patch solves perfectly the problem and also >>>>>>>> min/max windGustDir data base. >>>>>>>> Try stop and start weewx (logicaly same thing as restart... !?) >>>>>>>> Try to look for all wxxtype.py on your system to see if there is >>>>>>>> another file ? Logicaly no... >>>>>>>> >>>>>>>> >>>>>>>> Le dimanche 13 février 2022 à 20:23:07 UTC+1, paul...@gmail.com a >>>>>>>> écrit : >>>>>>>> >>>>>>>>> Hi Remy >>>>>>>>> Yes I did sudo /etc/init.d/weewx restart. Just in case I've done >>>>>>>>> it again but no change. >>>>>>>>> Can I just check I swapped the correct wxxtypes.py file. I swapped >>>>>>>>> the one in /usr/share/weewx/weewx >>>>>>>>> Paul >>>>>>>>> >>>>>>>>> On Sunday, 13 February 2022 at 18:08:44 UTC remy.l...@gmail.com >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Hi Paul. >>>>>>>>>> Have you triedto stop weewx and restart it ? >>>>>>>>>> You must do that if you modify python file. >>>>>>>>>> Cordialy >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Le dimanche 13 février 2022 à 18:32:38 UTC+1, paul...@gmail.com >>>>>>>>>> a écrit : >>>>>>>>>> >>>>>>>>>>> I don't report wind gust values/direction in the Current >>>>>>>>>>> Conditions section of my Seasons skin (version 4.6.2) but in the >>>>>>>>>>> Statistics >>>>>>>>>>> (previously High/Low) section I've always had a Max Wind entry with >>>>>>>>>>> both >>>>>>>>>>> speed and direction reported. Since 4.6.2 the direction is reported >>>>>>>>>>> as N/A >>>>>>>>>>> so I've followed this thread and replaced the wxxtypes.py file with >>>>>>>>>>> the new >>>>>>>>>>> one from Tom but it doesn't seem to have made any difference to my >>>>>>>>>>> Max Wind >>>>>>>>>>> entry. If you look at the Statistics report below it still shows >>>>>>>>>>> N/A for >>>>>>>>>>> Max Wind degrees for Day and Week but for Month and Year >>>>>>>>>>> (presumably data >>>>>>>>>>> from 4.5.1) a degree value is reported. >>>>>>>>>>> >>>>>>>>>>> [image: Max Wind.jpg] >>>>>>>>>>> Any suggestions? >>>>>>>>>>> >>>>>>>>>>> Paul >>>>>>>>>>> On Sunday, 13 February 2022 at 15:04:26 UTC asla...@gmail.com >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Brilliant, now it work just fine. >>>>>>>>>>>> Thanks a lot. >>>>>>>>>>>> >>>>>>>>>>>> On Sunday, February 13, 2022 at 3:28:45 PM UTC+1 >>>>>>>>>>>> remy.l...@gmail.com wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Yes !! Thank-you Tom it works great now : >>>>>>>>>>>>> >>>>>>>>>>>>> [image: Capture d’écran de 2022-02-13 15-26-27.png] >>>>>>>>>>>>> Le dimanche 13 février 2022 à 14:33:57 UTC+1, tke...@gmail.com >>>>>>>>>>>>> a écrit : >>>>>>>>>>>>> >>>>>>>>>>>>>> I was able to replicate the problem. Pre V4.6, if windGustDir >>>>>>>>>>>>>> was missing, windDir was substituted. That behavior went away >>>>>>>>>>>>>> with v4.6. >>>>>>>>>>>>>> This patch restores it. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Index: bin/weewx/wxxtypes.py >>>>>>>>>>>>>> >>>>>>>>>>>>>> =================================================================== >>>>>>>>>>>>>> diff --git a/bin/weewx/wxxtypes.py b/bin/weewx/wxxtypes.py >>>>>>>>>>>>>> --- a/bin/weewx/wxxtypes.py (revision >>>>>>>>>>>>>> 279bb450ab801c80a12b8ceadd0144e16c473bea) >>>>>>>>>>>>>> +++ b/bin/weewx/wxxtypes.py (date 1644758479921) >>>>>>>>>>>>>> @@ -98,11 +98,18 @@ >>>>>>>>>>>>>> return ValueTuple(val, 'degree_compass', >>>>>>>>>>>>>> 'group_direction') >>>>>>>>>>>>>> >>>>>>>>>>>>>> def calc_windGustDir(self, key, data, db_manager): >>>>>>>>>>>>>> - # Return the current gust direction if windGust is >>>>>>>>>>>>>> non-zero, otherwise, None >>>>>>>>>>>>>> - if 'windGust' not in data or 'windGustDir' not in >>>>>>>>>>>>>> data: >>>>>>>>>>>>>> + """If windGustDir is missing, substitute windDir. >>>>>>>>>>>>>> + Set windGustDir to None if windGust is zero.""" >>>>>>>>>>>>>> + if 'windGust' not in data: >>>>>>>>>>>>>> raise weewx.CannotCalculate >>>>>>>>>>>>>> if self.force_null and data['windGust'] == 0: >>>>>>>>>>>>>> + # windGust is zero. Force windGustDir to None >>>>>>>>>>>>>> val = None >>>>>>>>>>>>>> + elif 'windGustDir' not in data: >>>>>>>>>>>>>> + # windGustDir is missing. If available, >>>>>>>>>>>>>> substitute windDir. >>>>>>>>>>>>>> + if 'windDir' not in data: >>>>>>>>>>>>>> + raise weewx.CannotCalculate >>>>>>>>>>>>>> + val = data['windDir'] >>>>>>>>>>>>>> else: >>>>>>>>>>>>>> val = data['windGustDir'] >>>>>>>>>>>>>> return ValueTuple(val, 'degree_compass', >>>>>>>>>>>>>> 'group_direction') >>>>>>>>>>>>>> >>>>>>>>>>>>>> Commit 9dc4da8 >>>>>>>>>>>>>> <https://github.com/weewx/weewx/commit/9dc4da86a260f01d8792ac93d12871a05bff572d> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>>> If you want this right away, you can replace >>>>>>>>>>>>>> weewx/wxxtypes.py with this version >>>>>>>>>>>>>> <https://raw.githubusercontent.com/weewx/weewx/master/bin/weewx/wxxtypes.py> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Sun, Feb 13, 2022 at 1:38 AM Remy Lavabre < >>>>>>>>>>>>>> remy.l...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> [image: Capture d’écran de 2022-02-13 10-14-16.png] >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Same problem for me ! >>>>>>>>>>>>>>> Since weewx 4.6.x windGustDir is always N/A but the value is >>>>>>>>>>>>>>> correct. >>>>>>>>>>>>>>> I never had this problem before with 4.5.x or before... Only >>>>>>>>>>>>>>> since 4.6.x >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> WindGustDir is always None in loop package values : >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> LOOP: 2022-02-13 10:32:17 CET (1644744737) 'altimeter': >>>>>>>>>>>>>>> '30.122934097139712', 'appTemp': '45.455613403122314', >>>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>>> '30.14900779712183', 'beaufort': '1', 'cloudbase': >>>>>>>>>>>>>>> '3288.4136917377255', >>>>>>>>>>>>>>> 'dateTime': '1644744737', 'dayRain': '0.0', 'dewpoint': >>>>>>>>>>>>>>> '41.36', 'ET': >>>>>>>>>>>>>>> 'None', 'extraHumid1': '65', 'extraHumid2': '91', >>>>>>>>>>>>>>> 'extraHumid3': 'None', >>>>>>>>>>>>>>> 'extraHumid4': 'None', 'extraHumid5': 'None', 'extraHumid6': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'extraHumid7': 'None', 'extraTemp1': '51.980000000000004', >>>>>>>>>>>>>>> 'extraTemp2': >>>>>>>>>>>>>>> '51.980000000000004', 'extraTemp3': 'None', 'extraTemp4': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'extraTemp5': 'None', 'extraTemp6': 'None', 'extraTemp7': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'heatindex': '46.88600000000001', 'humidex': '48.74', >>>>>>>>>>>>>>> 'inDewpoint': >>>>>>>>>>>>>>> '52.863712008361716', 'inHumidity': '52', 'inTemp': '71.42', >>>>>>>>>>>>>>> 'maxSolarRad': >>>>>>>>>>>>>>> '326.89345093846424', 'outHumidity': '76', 'outTemp': '48.74', >>>>>>>>>>>>>>> 'pressure': >>>>>>>>>>>>>>> '28.372387999999997', 'rain': '0.0', 'rainRate': '0.0', >>>>>>>>>>>>>>> 'usUnits': '1', >>>>>>>>>>>>>>> 'UV': '0', 'windchill': '48.74', *'windDir': '123*', >>>>>>>>>>>>>>> '*windGust': >>>>>>>>>>>>>>> '2.4233536729342466', 'windGustDir': 'None',* 'windrun': >>>>>>>>>>>>>>> 'None', *'windSpeed': '2.4233536729342466'* >>>>>>>>>>>>>>> LOOP: 2022-02-13 10:32:29 CET (1644744749) 'altimeter': >>>>>>>>>>>>>>> '30.122934097139712', 'appTemp': '44.055613403122315', >>>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>>> '30.14900779712183', 'beaufort': '2', 'cloudbase': >>>>>>>>>>>>>>> '3288.4136917377255', >>>>>>>>>>>>>>> 'dateTime': '1644744749', 'dayRain': '0.0', 'dewpoint': >>>>>>>>>>>>>>> '41.36', 'ET': >>>>>>>>>>>>>>> 'None', 'extraHumid1': '65', 'extraHumid2': '91', >>>>>>>>>>>>>>> 'extraHumid3': 'None', >>>>>>>>>>>>>>> 'extraHumid4': 'None', 'extraHumid5': 'None', 'extraHumid6': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'extraHumid7': 'None', 'extraTemp1': '51.980000000000004', >>>>>>>>>>>>>>> 'extraTemp2': >>>>>>>>>>>>>>> '51.980000000000004', 'extraTemp3': 'None', 'extraTemp4': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'extraTemp5': 'None', 'extraTemp6': 'None', 'extraTemp7': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'heatindex': '46.88600000000001', 'humidex': '48.74', >>>>>>>>>>>>>>> 'inDewpoint': >>>>>>>>>>>>>>> '52.863712008361716', 'inHumidity': '52', 'inTemp': '71.42', >>>>>>>>>>>>>>> 'maxSolarRad': >>>>>>>>>>>>>>> '327.35927830102435', 'outHumidity': '76', 'outTemp': '48.74', >>>>>>>>>>>>>>> 'pressure': >>>>>>>>>>>>>>> '28.372387999999997', 'rain': '0.0', 'rainRate': '0.0', >>>>>>>>>>>>>>> 'usUnits': '1', >>>>>>>>>>>>>>> 'UV': '0', 'windchill': '46.79476438640812', '*windDir': >>>>>>>>>>>>>>> '151',* *'windGust': '7.33219829246772', 'windGustDir': >>>>>>>>>>>>>>> 'None',* 'windrun': 'None', *'windSpeed': >>>>>>>>>>>>>>> '4.908844619533474'* >>>>>>>>>>>>>>> LOOP: 2022-02-13 10:32:41 CET (1644744761) 'altimeter': >>>>>>>>>>>>>>> '30.122934097139712', 'appTemp': '44.055613403122315', >>>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>>> '30.14900779712183', 'beaufort': '2', 'cloudbase': >>>>>>>>>>>>>>> '3288.4136917377255', >>>>>>>>>>>>>>> 'dateTime': '1644744761', 'dayRain': '0.0', 'dewpoint': >>>>>>>>>>>>>>> '41.36', 'ET': >>>>>>>>>>>>>>> 'None', 'extraHumid1': '65', 'extraHumid2': '91', >>>>>>>>>>>>>>> 'extraHumid3': 'None', >>>>>>>>>>>>>>> 'extraHumid4': 'None', 'extraHumid5': 'None', 'extraHumid6': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'extraHumid7': 'None', 'extraTemp1': '51.980000000000004', >>>>>>>>>>>>>>> 'extraTemp2': >>>>>>>>>>>>>>> '51.980000000000004', 'extraTemp3': 'None', 'extraTemp4': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'extraTemp5': 'None', 'extraTemp6': 'None', 'extraTemp7': >>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>> 'heatindex': '46.88600000000001', 'humidex': '48.74', >>>>>>>>>>>>>>> 'inDewpoint': >>>>>>>>>>>>>>> '52.863712008361716', 'inHumidity': '52', 'inTemp': '71.42', >>>>>>>>>>>>>>> 'maxSolarRad': >>>>>>>>>>>>>>> '327.8246605889759', 'outHumidity': '76', 'outTemp': '48.74', >>>>>>>>>>>>>>> 'pressure': >>>>>>>>>>>>>>> '28.372387999999997', 'rain': '0.0', 'rainRate': '0.0', >>>>>>>>>>>>>>> 'usUnits': '1', >>>>>>>>>>>>>>> 'UV': '0', 'windchill': '46.79476438640812', '*windDir': >>>>>>>>>>>>>>> '109'*, *'windGust': '7.829296481787566', 'windGustDir': >>>>>>>>>>>>>>> 'None'*, 'windrun': 'None', '*windSpeed': >>>>>>>>>>>>>>> '4.908844619533474'* >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Le samedi 12 février 2022 à 19:23:27 UTC+1, >>>>>>>>>>>>>>> asla...@gmail.com a écrit : >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The result with a couple of LOOP records. >>>>>>>>>>>>>>>> Both windGust and windGustDir occur in both REC and Loop >>>>>>>>>>>>>>>> records. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> REC: 2022-02-12 19:15:49 CET (1644689749) 'altimeter': >>>>>>>>>>>>>>>> '29.447857403881475', 'appTemp': '20.60149362123522', >>>>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>>>> '29.56391226224894', 'cloudbase': '3549.153942263896', >>>>>>>>>>>>>>>> 'dateTime': >>>>>>>>>>>>>>>> '1644689749', 'delay': '10', 'dewpoint': '28.364486445406747', >>>>>>>>>>>>>>>> 'ET': >>>>>>>>>>>>>>>> 'None', 'heatindex': '32.36', 'humidex': '32.36', >>>>>>>>>>>>>>>> 'inDewpoint': >>>>>>>>>>>>>>>> '20.586469406020147', 'inHumidity': '41.0', 'inTemp': >>>>>>>>>>>>>>>> '42.620000000000005', >>>>>>>>>>>>>>>> 'interval': '10', 'maxSolarRad': '0.0', 'outHumidity': '85.0', >>>>>>>>>>>>>>>> 'outTemp': >>>>>>>>>>>>>>>> '32.36', 'outTempBatteryStatus': '0', 'pressure': >>>>>>>>>>>>>>>> '26.733497683750002', >>>>>>>>>>>>>>>> 'ptr': '38208', 'radiation': 'None', 'rain': 'None', >>>>>>>>>>>>>>>> 'rainRate': '0.0', >>>>>>>>>>>>>>>> 'rainTotal': '104.33999999999999', 'rxCheckPercent': '100', >>>>>>>>>>>>>>>> 'status': '0', >>>>>>>>>>>>>>>> 'usUnits': '1', 'UV': 'None', 'windchill': >>>>>>>>>>>>>>>> '22.558136878652178', 'windDir': >>>>>>>>>>>>>>>> '202.5', 'windGust': '15.882287148769064', 'windGustDir': >>>>>>>>>>>>>>>> 'None', >>>>>>>>>>>>>>>> 'windrun': '2.274224216138293', 'windSpeed': >>>>>>>>>>>>>>>> '13.645345296829756' >>>>>>>>>>>>>>>> LOOP: 2022-02-12 19:19:05 CET (1644689945) 'altimeter': >>>>>>>>>>>>>>>> '29.444663747054953', 'appTemp': '18.256881727966974', >>>>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>>>> '29.56173534294736', 'cloudbase': '3548.394255363211', >>>>>>>>>>>>>>>> 'dateTime': >>>>>>>>>>>>>>>> '1644689945', 'delay': '3', 'dewpoint': '28.187829067769762', >>>>>>>>>>>>>>>> 'ET': 'None', >>>>>>>>>>>>>>>> 'heatindex': '32.18', 'humidex': '32.18', 'inDewpoint': >>>>>>>>>>>>>>>> '20.586469406020147', 'inHumidity': '41.0', 'inTemp': >>>>>>>>>>>>>>>> '42.620000000000005', >>>>>>>>>>>>>>>> 'maxSolarRad': '0.0', 'outHumidity': '85.0', 'outTemp': >>>>>>>>>>>>>>>> '32.18', >>>>>>>>>>>>>>>> 'outTempBatteryStatus': '0', 'pressure': '26.730544685', >>>>>>>>>>>>>>>> 'ptr': '38224', >>>>>>>>>>>>>>>> 'radiation': 'None', 'rain': 'None', 'rainRate': '0.0', >>>>>>>>>>>>>>>> 'rainTotal': >>>>>>>>>>>>>>>> '104.33999999999999', 'rxCheckPercent': '100', 'status': '0', >>>>>>>>>>>>>>>> 'usUnits': >>>>>>>>>>>>>>>> '1', 'UV': 'None', 'windchill': '20.989026611354667', >>>>>>>>>>>>>>>> 'windDir': '202.5', >>>>>>>>>>>>>>>> 'windGust': '19.68508829706588', 'windGustDir': 'None', >>>>>>>>>>>>>>>> 'windrun': 'None', >>>>>>>>>>>>>>>> 'windSpeed': '17.448146445126575' >>>>>>>>>>>>>>>> LOOP: 2022-02-12 19:20:06 CET (1644690006) 'altimeter': >>>>>>>>>>>>>>>> '29.441470085033213', 'appTemp': '22.918881727966976', >>>>>>>>>>>>>>>> 'barometer': >>>>>>>>>>>>>>>> '29.558469574570985', 'cloudbase': '3548.394255363211', >>>>>>>>>>>>>>>> 'dateTime': >>>>>>>>>>>>>>>> '1644690006', 'delay': '3', 'dewpoint': '28.187829067769762', >>>>>>>>>>>>>>>> 'ET': 'None', >>>>>>>>>>>>>>>> 'heatindex': '32.18', 'humidex': '32.18', 'inDewpoint': >>>>>>>>>>>>>>>> '20.586469406020147', 'inHumidity': '41.0', 'inTemp': >>>>>>>>>>>>>>>> '42.620000000000005', >>>>>>>>>>>>>>>> 'maxSolarRad': '0.0', 'outHumidity': '85.0', 'outTemp': >>>>>>>>>>>>>>>> '32.18', >>>>>>>>>>>>>>>> 'outTempBatteryStatus': '0', 'pressure': '26.72759168625', >>>>>>>>>>>>>>>> 'ptr': '38224', >>>>>>>>>>>>>>>> 'radiation': 'None', 'rain': '0.0', 'rainRate': '0.0', >>>>>>>>>>>>>>>> 'rainTotal': >>>>>>>>>>>>>>>> '104.33999999999999', 'rxCheckPercent': '100', 'status': '0', >>>>>>>>>>>>>>>> 'usUnits': >>>>>>>>>>>>>>>> '1', 'UV': 'None', 'windchill': '24.387120697115183', >>>>>>>>>>>>>>>> 'windDir': '180.0', >>>>>>>>>>>>>>>> 'windGust': '11.408403444890455', 'windGustDir': 'None', >>>>>>>>>>>>>>>> 'windrun': 'None', >>>>>>>>>>>>>>>> 'windSpeed': '9.171461592951148' >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Saturday, February 12, 2022 at 5:25:08 PM UTC+1 >>>>>>>>>>>>>>>> tke...@gmail.com wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Could you do the same again, except this time show the >>>>>>>>>>>>>>>>> LOOP data as well? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I'm not exactly sure what's happening, but my operating >>>>>>>>>>>>>>>>> theory is that windGust and windDir never appear in the same >>>>>>>>>>>>>>>>> LOOP packet. >>>>>>>>>>>>>>>>> When the software sees windGust, but no windGustDir, it looks >>>>>>>>>>>>>>>>> to substitute >>>>>>>>>>>>>>>>> windDir, but it's not available. We can tell if this theory >>>>>>>>>>>>>>>>> is correct by >>>>>>>>>>>>>>>>> looking at the LOOP packets. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Sat, Feb 12, 2022 at 6:05 AM Tom Keffer < >>>>>>>>>>>>>>>>> tke...@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Sorry, yes, that's what I meant. If windGustDir is >>>>>>>>>>>>>>>>>> missing, it should substitute windDir in its place. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Let me think about this for a bit. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Sat, Feb 12, 2022 at 5:59 AM Aslak Vaa < >>>>>>>>>>>>>>>>>> asla...@gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Here is the result from running weewxd from the >>>>>>>>>>>>>>>>>>> command line: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> REC: 2022-02-12 14:45:49 CET (1644673549) >>>>>>>>>>>>>>>>>>> 'altimeter': '29.559632125170864', 'appTemp': >>>>>>>>>>>>>>>>>>> '21.798150800000002', >>>>>>>>>>>>>>>>>>> 'barometer': '29.68039690383254', 'cloudbase': >>>>>>>>>>>>>>>>>>> '3612.989261474405', >>>>>>>>>>>>>>>>>>> 'dateTime': '1644673549', 'delay': '10', 'dewpoint': >>>>>>>>>>>>>>>>>>> '27.72361104088051', >>>>>>>>>>>>>>>>>>> 'ET': 'None', 'heatindex': '32.0', 'humidex': '32.0', >>>>>>>>>>>>>>>>>>> 'inDewpoint': >>>>>>>>>>>>>>>>>>> '20.331537695862405', 'inHumidity': '40.0', 'inTemp': >>>>>>>>>>>>>>>>>>> '42.980000000000004', >>>>>>>>>>>>>>>>>>> 'interval': '10', 'maxSolarRad': '123.63840457180561', >>>>>>>>>>>>>>>>>>> 'outHumidity': >>>>>>>>>>>>>>>>>>> '84.0', 'outTemp': '32.0', 'outTempBatteryStatus': '0', >>>>>>>>>>>>>>>>>>> 'pressure': >>>>>>>>>>>>>>>>>>> '26.836852640000004', 'ptr': '37776', 'radiation': 'None', >>>>>>>>>>>>>>>>>>> 'rain': 'None', >>>>>>>>>>>>>>>>>>> 'rainRate': '0.0', 'rainTotal': '104.33999999999999', >>>>>>>>>>>>>>>>>>> 'rxCheckPercent': >>>>>>>>>>>>>>>>>>> '100', 'status': '0', 'usUnits': '1', 'UV': 'None', >>>>>>>>>>>>>>>>>>> 'windchill': >>>>>>>>>>>>>>>>>>> '23.361958924222293', 'windDir': '225.0', 'windGust': >>>>>>>>>>>>>>>>>>> '12.079486000472244', >>>>>>>>>>>>>>>>>>> 'windGustDir': 'None', 'windrun': '1.7895534815514438', >>>>>>>>>>>>>>>>>>> 'windSpeed': >>>>>>>>>>>>>>>>>>> '10.737320889308663' >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Until version 4.6.0 the windGustDir was recorded in the >>>>>>>>>>>>>>>>>>> database with a value different from NULL. It seems for me >>>>>>>>>>>>>>>>>>> that something >>>>>>>>>>>>>>>>>>> is changed. >>>>>>>>>>>>>>>>>>> Do you mean that windGustDir should have the value of >>>>>>>>>>>>>>>>>>> windDir (windGust is a speed, not a direction)? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Saturday, February 12, 2022 at 2:41:29 PM UTC+1 >>>>>>>>>>>>>>>>>>> tke...@gmail.com wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> FO stations do not supply windGustDir, so the software >>>>>>>>>>>>>>>>>>>> should substitute windGust in its place. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Could you please run weewxd directly from the command >>>>>>>>>>>>>>>>>>>> line >>>>>>>>>>>>>>>>>>>> <http://www.weewx.com/docs/usersguide.htm#Running_directly>? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Watch what it prints out for records (marked with "REC:"). >>>>>>>>>>>>>>>>>>>> What does it >>>>>>>>>>>>>>>>>>>> show for windGust and windGustDir? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -tk >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Sat, Feb 12, 2022 at 4:19 AM Aslak Vaa < >>>>>>>>>>>>>>>>>>>> asla...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> After upgrating to weewx version 4.6.0/4.6.2 >>>>>>>>>>>>>>>>>>>>> is windGustDir is always set to NULL in database >>>>>>>>>>>>>>>>>>>>> (sqlite3). >>>>>>>>>>>>>>>>>>>>> Please see results of query from the database and >>>>>>>>>>>>>>>>>>>>> extracts from the syslog file. >>>>>>>>>>>>>>>>>>>>> I stopped the version 4.5.1 at feb 5 15:02:05, and I >>>>>>>>>>>>>>>>>>>>> started the version 4.6.0 same date half an hour later at >>>>>>>>>>>>>>>>>>>>> 15:32:19. The >>>>>>>>>>>>>>>>>>>>> windDir is saved as expected, only windGustDir is missing. >>>>>>>>>>>>>>>>>>>>> My weatherstation is model WH1080 , and I am using >>>>>>>>>>>>>>>>>>>>> the FineOffsetUSB driver. >>>>>>>>>>>>>>>>>>>>> Contents of database: >>>>>>>>>>>>>>>>>>>>> sqlite3 /var/lib/weewx/weewx.sdb >>>>>>>>>>>>>>>>>>>>> SQLite version 3.34.1 2021-01-20 14:10:07 >>>>>>>>>>>>>>>>>>>>> Enter ".help" for usage hints. >>>>>>>>>>>>>>>>>>>>> sqlite> select dateTime(archive.dateTime, >>>>>>>>>>>>>>>>>>>>> 'unixepoch', 'localtime') dateTime, >>>>>>>>>>>>>>>>>>>>> ...> archive.windSpeed, archive.windDir, >>>>>>>>>>>>>>>>>>>>> archive.windGust, archive.windGustDir >>>>>>>>>>>>>>>>>>>>> ...> from archive >>>>>>>>>>>>>>>>>>>>> ...> where archive.datetime > >>>>>>>>>>>>>>>>>>>>> ...> (select max(archive.dateTime) from archive >>>>>>>>>>>>>>>>>>>>> where windGustDir is not null) - 1000 >>>>>>>>>>>>>>>>>>>>> ...> limit 10; >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 14:50:00|17.1634447548798|234.745604391204|29.7513266307928|247.5 >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 15:00:00|17.6108331252676|221.995376457057|27.2906905936595|247.5 >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 15:14:51|24.3826661861384|202.5|32.6593510383139| >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 15:24:51|21.2509475934234|247.5|22.8168068897809| >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 15:34:51|22.8168068897809|180.0|27.2906905936595| >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 15:40:00|24.3826661861384|225.0|28.1854673344352| >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 15:50:00|19.2987074317309|222.892960584793|34.8962928902532| >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 16:00:00|19.6444166270306|220.208490631264|34.2252103346714| >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 16:10:00|17.3871389400737|226.684593888771|23.4878894453627| >>>>>>>>>>>>>>>>>>>>> 2022-02-05 >>>>>>>>>>>>>>>>>>>>> 16:20:00|13.7673603069355|222.317738592905|25.0537487417202| >>>>>>>>>>>>>>>>>>>>> sqlite> >>>>>>>>>>>>>>>>>>>>> Extracts from syslog: >>>>>>>>>>>>>>>>>>>>> aslak-pi0:~ $ grep '4\.5\.' /var/log/syslog.1 | tail >>>>>>>>>>>>>>>>>>>>> Jan 30 09:51:04 aslak-pi0 weewx[952] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Jan 30 19:29:02 aslak-pi0 weewx[976] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Jan 30 19:29:02 aslak-pi0 weewx[979] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Jan 31 19:28:05 aslak-pi0 weewx[965] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Jan 31 19:28:05 aslak-pi0 weewx[968] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Feb 1 20:32:31 aslak-pi0 weewx[1032] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Feb 1 20:32:31 aslak-pi0 weewx[1037] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Feb 2 15:44:42 aslak-pi0 weewx[15495] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Feb 2 15:44:43 aslak-pi0 weewx[15498] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> Feb 5 15:02:05 aslak-pi0 weewx[15498] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Terminating weewx version 4.5.1 >>>>>>>>>>>>>>>>>>>>> aslak-pi0:~ $ grep '4\.6\.0' /var/log/syslog.1 | head >>>>>>>>>>>>>>>>>>>>> Feb 5 15:32:19 aslak-pi0 weewx[37838] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 15:32:19 aslak-pi0 weewx[37841] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 15:33:45 aslak-pi0 weewx[37841] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Terminating weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 15:35:28 aslak-pi0 weewx[37964] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 15:35:28 aslak-pi0 weewx[37967] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 16:46:50 aslak-pi0 weewx[37967] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Terminating weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 16:46:54 aslak-pi0 weewx[38640] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 16:46:54 aslak-pi0 weewx[38643] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Starting up weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 16:57:25 aslak-pi0 weewx[38643] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Terminating weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> Feb 5 16:57:29 aslak-pi0 weewx[38793] INFO __main__: >>>>>>>>>>>>>>>>>>>>> Initializing weewx version 4.6.0 >>>>>>>>>>>>>>>>>>>>> aslak-pi0:~ $ >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed >>>>>>>>>>>>>>>>>>>>> to the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>>> weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/1acfbc59-01a5-44a9-b1a8-bd000823204fn%40googlegroups.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/1acfbc59-01a5-44a9-b1a8-bd000823204fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>> the Google Groups "weewx-user" group. >>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>> weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/7e95cedd-6db0-4bd2-9209-babeee3218e1n%40googlegroups.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/7e95cedd-6db0-4bd2-9209-babeee3218e1n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "weewx-user" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from it, send an email to weewx-user+...@googlegroups.com. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/70d09feb-27f0-40ce-909b-5d62c5757f6cn%40googlegroups.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/70d09feb-27f0-40ce-909b-5d62c5757f6cn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>>> . >>>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx-user+...@googlegroups.com. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/a2bfcae9-dd7f-43c7-a28c-40ac8a165d07n%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/a2bfcae9-dd7f-43c7-a28c-40ac8a165d07n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/432b2bea-e5a5-4c16-ab91-8d9e8e6097e5n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/432b2bea-e5a5-4c16-ab91-8d9e8e6097e5n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/634b7352-be14-4d09-b555-d58702a09d24n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/634b7352-be14-4d09-b555-d58702a09d24n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b7c06f0a-5a43-430a-82c9-6b72324d32ben%40googlegroups.com.
