I know this is an old thread but is precisely the question I have. "wee_device" reports the cups as "large", but the cups on my sensor don't seem large to me. Are the "small" really tiny?
Just curious because what counts as "extraordinary circumstances"? On the day of the Colorado Marshall Fire, I recorded a gust of 49 mph when other stations were reporting much higher numbers; is this such a circumstance? Thanks! On Saturday, October 20, 2018 at 7:57:52 PM UTC-6 tke...@gmail.com wrote: > Thanks, Philip. That's the first reference I've seen to "Vue" cups. As I > said, you'd have to ask Davis. > > But, in any case, don't worry about it. Only under extraordinary > circumstances do you need to set it. > > -tk > > On Sat, Oct 20, 2018 at 6:51 PM Philip Kutzenco <kutz...@gmail.com> wrote: > >> Thomas, >> >> Thanks for the reply. I won't worry about it. The reason I asked is that >> the help file for Davis' Weatherlink software shows three options. See the >> attached screen shot I took for setting that in the console with >> Weatherlink. Evidently, you can set a VantagePro to use small cups or >> Vue/Other cups. I'll just leave the value as it is set in the console >> without setting it explicitly. >> phil >> >> On Saturday, October 20, 2018 at 8:22:26 PM UTC-4, Thomas Keffer wrote: >>> >>> A Vantage (whether a Vue or a VantagePro) ships with a value in the >>> EEPROM firmware that matches its cup size. Unless you change the cups, >>> there is no reason to mess with this value. The wee_device utility option >>> is there if, for some reason, you have to change the cups. >>> >>> To answer your question, the Davis documentation lists only two sizes: >>> small and large. If there's a third "Vue" sized, I haven't heard of it. >>> You'd have to ask Davis. >>> >>> -tk >>> >>> On Sat, Oct 20, 2018 at 7:35 AM Philip Kutzenco <kutz...@gmail.com> >>> wrote: >>> >>>> Now that I have my external website operational ( >>>> https://wx.kutzenco.com) with a Mosquitto MQTT broker and Belchertown >>>> skin, I'm spending a bit more time reviewing the weeWX documentation to >>>> get >>>> a deeper understanding of my system. I'm hoping to do some customization. >>>> >>>> I have a Davis Vantage Vue weather station and weeWX running on a >>>> Raspberry Pi Zero W. I see that the Davis Weatherlink software gives the >>>> options for wind cup size as Small, Large or Vue/Other. That Davis >>>> documentation says that Vantage Pro systems generally ship with large >>>> cups, >>>> and that (obviously) Vantage Vue systems ship with Vue cups. >>>> >>>> The wee_device --help command mentions only Small and Large options for >>>> wind cup size. Is there an option for Vue/other cups? I don't know what is >>>> adjusted in the readings/calculations by specifying different cup sizes. I >>>> didn't see that called out in the weeWX documention. I suspect the >>>> difference is minimal, but, just to ensure that everything can be set >>>> properly with weeWX does that option need to be added to wee_device for >>>> Vantage systems, if it isn't there? >>>> >>>> phil >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c52c96d6-2b18-4768-b823-c5957e17bdb1n%40googlegroups.com.
