I don't report wind gust values/direction in the Current Conditions section 
of my Seasons skin (version 4.6.2) but in the Statistics (previously 
High/Low) section I've always had a Max Wind entry with both speed and 
direction reported. Since 4.6.2 the direction is reported as N/A so I've 
followed this thread and replaced the wxxtypes.py file with the new one 
from Tom but it doesn't seem to have made any difference to my Max Wind 
entry. If you look at the Statistics report below it still shows N/A for 
Max Wind degrees for Day and Week but for Month and Year (presumably data 
from 4.5.1) a degree value is reported.

[image: Max Wind.jpg]
Any suggestions?

Paul
On Sunday, 13 February 2022 at 15:04:26 UTC asla...@gmail.com wrote:

> Brilliant, now it work just fine.
> Thanks a lot.
>
> On Sunday, February 13, 2022 at 3:28:45 PM UTC+1 remy.l...@gmail.com 
> wrote:
>
>> Yes !! Thank-you Tom it works great now :
>>
>> [image: Capture d’écran de 2022-02-13 15-26-27.png]
>> Le dimanche 13 février 2022 à 14:33:57 UTC+1, tke...@gmail.com a écrit :
>>
>>> I was able to replicate the problem. Pre V4.6, if windGustDir was 
>>> missing, windDir was substituted. That behavior went away with v4.6. This 
>>> patch restores it.
>>>
>>> Index: bin/weewx/wxxtypes.py
>>> ===================================================================
>>> diff --git a/bin/weewx/wxxtypes.py b/bin/weewx/wxxtypes.py
>>> --- a/bin/weewx/wxxtypes.py (revision 
>>> 279bb450ab801c80a12b8ceadd0144e16c473bea)
>>> +++ b/bin/weewx/wxxtypes.py (date 1644758479921)
>>> @@ -98,11 +98,18 @@
>>>          return ValueTuple(val, 'degree_compass', 'group_direction')
>>>  
>>>      def calc_windGustDir(self, key, data, db_manager):
>>> -        # Return the current gust direction if windGust is non-zero, 
>>> otherwise, None
>>> -        if 'windGust' not in data or 'windGustDir' not in data:
>>> +        """If windGustDir is missing, substitute windDir.
>>> +        Set windGustDir to None if windGust is zero."""
>>> +        if 'windGust' not in data:
>>>              raise weewx.CannotCalculate
>>>          if self.force_null and data['windGust'] == 0:
>>> +            # windGust is zero. Force windGustDir to None
>>>              val = None
>>> +        elif 'windGustDir' not in data:
>>> +            # windGustDir is missing. If available, substitute windDir.
>>> +            if 'windDir' not in data:
>>> +                raise weewx.CannotCalculate
>>> +            val = data['windDir']
>>>          else:
>>>              val = data['windGustDir']
>>>          return ValueTuple(val, 'degree_compass', 'group_direction')
>>>
>>> Commit 9dc4da8 
>>> <https://github.com/weewx/weewx/commit/9dc4da86a260f01d8792ac93d12871a05bff572d>
>>> . 
>>>
>>> If you want this right away, you can replace weewx/wxxtypes.py with this 
>>> version 
>>> <https://raw.githubusercontent.com/weewx/weewx/master/bin/weewx/wxxtypes.py>
>>> .
>>>
>>>
>>>
>>> On Sun, Feb 13, 2022 at 1:38 AM Remy Lavabre <remy.l...@gmail.com> 
>>> wrote:
>>>
>>>>
>>>> [image: Capture d’écran de 2022-02-13 10-14-16.png]
>>>>
>>>> Same problem for me !
>>>> Since weewx 4.6.x windGustDir is always N/A but the value is correct.
>>>> I never had this problem before with 4.5.x or before... Only since 4.6.x
>>>>
>>>> WindGustDir is always None in loop package values :
>>>>
>>>>
>>>> LOOP:   2022-02-13 10:32:17 CET (1644744737) 'altimeter': 
>>>> '30.122934097139712', 'appTemp': '45.455613403122314', 'barometer': 
>>>> '30.14900779712183', 'beaufort': '1', 'cloudbase': '3288.4136917377255', 
>>>> 'dateTime': '1644744737', 'dayRain': '0.0', 'dewpoint': '41.36', 'ET': 
>>>> 'None', 'extraHumid1': '65', 'extraHumid2': '91', 'extraHumid3': 'None', 
>>>> 'extraHumid4': 'None', 'extraHumid5': 'None', 'extraHumid6': 'None', 
>>>> 'extraHumid7': 'None', 'extraTemp1': '51.980000000000004', 'extraTemp2': 
>>>> '51.980000000000004', 'extraTemp3': 'None', 'extraTemp4': 'None', 
>>>> 'extraTemp5': 'None', 'extraTemp6': 'None', 'extraTemp7': 'None', 
>>>> 'heatindex': '46.88600000000001', 'humidex': '48.74', 'inDewpoint': 
>>>> '52.863712008361716', 'inHumidity': '52', 'inTemp': '71.42', 
>>>> 'maxSolarRad': 
>>>> '326.89345093846424', 'outHumidity': '76', 'outTemp': '48.74', 'pressure': 
>>>> '28.372387999999997', 'rain': '0.0', 'rainRate': '0.0', 'usUnits': '1', 
>>>> 'UV': '0', 'windchill': '48.74', *'windDir': '123*', '*windGust': 
>>>> '2.4233536729342466', 'windGustDir': 'None',* 'windrun': 'None', 
>>>> *'windSpeed': 
>>>> '2.4233536729342466'*
>>>> LOOP:   2022-02-13 10:32:29 CET (1644744749) 'altimeter': 
>>>> '30.122934097139712', 'appTemp': '44.055613403122315', 'barometer': 
>>>> '30.14900779712183', 'beaufort': '2', 'cloudbase': '3288.4136917377255', 
>>>> 'dateTime': '1644744749', 'dayRain': '0.0', 'dewpoint': '41.36', 'ET': 
>>>> 'None', 'extraHumid1': '65', 'extraHumid2': '91', 'extraHumid3': 'None', 
>>>> 'extraHumid4': 'None', 'extraHumid5': 'None', 'extraHumid6': 'None', 
>>>> 'extraHumid7': 'None', 'extraTemp1': '51.980000000000004', 'extraTemp2': 
>>>> '51.980000000000004', 'extraTemp3': 'None', 'extraTemp4': 'None', 
>>>> 'extraTemp5': 'None', 'extraTemp6': 'None', 'extraTemp7': 'None', 
>>>> 'heatindex': '46.88600000000001', 'humidex': '48.74', 'inDewpoint': 
>>>> '52.863712008361716', 'inHumidity': '52', 'inTemp': '71.42', 
>>>> 'maxSolarRad': 
>>>> '327.35927830102435', 'outHumidity': '76', 'outTemp': '48.74', 'pressure': 
>>>> '28.372387999999997', 'rain': '0.0', 'rainRate': '0.0', 'usUnits': '1', 
>>>> 'UV': '0', 'windchill': '46.79476438640812', '*windDir': '151',* 
>>>> *'windGust': 
>>>> '7.33219829246772', 'windGustDir': 'None',* 'windrun': 'None', 
>>>> *'windSpeed': 
>>>> '4.908844619533474'*
>>>> LOOP:   2022-02-13 10:32:41 CET (1644744761) 'altimeter': 
>>>> '30.122934097139712', 'appTemp': '44.055613403122315', 'barometer': 
>>>> '30.14900779712183', 'beaufort': '2', 'cloudbase': '3288.4136917377255', 
>>>> 'dateTime': '1644744761', 'dayRain': '0.0', 'dewpoint': '41.36', 'ET': 
>>>> 'None', 'extraHumid1': '65', 'extraHumid2': '91', 'extraHumid3': 'None', 
>>>> 'extraHumid4': 'None', 'extraHumid5': 'None', 'extraHumid6': 'None', 
>>>> 'extraHumid7': 'None', 'extraTemp1': '51.980000000000004', 'extraTemp2': 
>>>> '51.980000000000004', 'extraTemp3': 'None', 'extraTemp4': 'None', 
>>>> 'extraTemp5': 'None', 'extraTemp6': 'None', 'extraTemp7': 'None', 
>>>> 'heatindex': '46.88600000000001', 'humidex': '48.74', 'inDewpoint': 
>>>> '52.863712008361716', 'inHumidity': '52', 'inTemp': '71.42', 
>>>> 'maxSolarRad': 
>>>> '327.8246605889759', 'outHumidity': '76', 'outTemp': '48.74', 'pressure': 
>>>> '28.372387999999997', 'rain': '0.0', 'rainRate': '0.0', 'usUnits': '1', 
>>>> 'UV': '0', 'windchill': '46.79476438640812', '*windDir': '109'*, 
>>>> *'windGust': 
>>>> '7.829296481787566', 'windGustDir': 'None'*, 'windrun': 'None', 
>>>> '*windSpeed': 
>>>> '4.908844619533474'*
>>>>
>>>>
>>>> Le samedi 12 février 2022 à 19:23:27 UTC+1, asla...@gmail.com a écrit :
>>>>
>>>>> The result with a couple of LOOP records.
>>>>> Both windGust and windGustDir occur in both REC and Loop records.
>>>>>
>>>>> REC:    2022-02-12 19:15:49 CET (1644689749) 'altimeter': 
>>>>> '29.447857403881475', 'appTemp': '20.60149362123522', 'barometer': 
>>>>> '29.56391226224894', 'cloudbase': '3549.153942263896', 'dateTime': 
>>>>> '1644689749', 'delay': '10', 'dewpoint': '28.364486445406747', 'ET': 
>>>>> 'None', 'heatindex': '32.36', 'humidex': '32.36', 'inDewpoint': 
>>>>> '20.586469406020147', 'inHumidity': '41.0', 'inTemp': 
>>>>> '42.620000000000005', 
>>>>> 'interval': '10', 'maxSolarRad': '0.0', 'outHumidity': '85.0', 'outTemp': 
>>>>> '32.36', 'outTempBatteryStatus': '0', 'pressure': '26.733497683750002', 
>>>>> 'ptr': '38208', 'radiation': 'None', 'rain': 'None', 'rainRate': '0.0', 
>>>>> 'rainTotal': '104.33999999999999', 'rxCheckPercent': '100', 'status': 
>>>>> '0', 
>>>>> 'usUnits': '1', 'UV': 'None', 'windchill': '22.558136878652178', 
>>>>> 'windDir': 
>>>>> '202.5', 'windGust': '15.882287148769064', 'windGustDir': 'None', 
>>>>> 'windrun': '2.274224216138293', 'windSpeed': '13.645345296829756'
>>>>> LOOP:   2022-02-12 19:19:05 CET (1644689945) 'altimeter': 
>>>>> '29.444663747054953', 'appTemp': '18.256881727966974', 'barometer': 
>>>>> '29.56173534294736', 'cloudbase': '3548.394255363211', 'dateTime': 
>>>>> '1644689945', 'delay': '3', 'dewpoint': '28.187829067769762', 'ET': 
>>>>> 'None', 
>>>>> 'heatindex': '32.18', 'humidex': '32.18', 'inDewpoint': 
>>>>> '20.586469406020147', 'inHumidity': '41.0', 'inTemp': 
>>>>> '42.620000000000005', 
>>>>> 'maxSolarRad': '0.0', 'outHumidity': '85.0', 'outTemp': '32.18', 
>>>>> 'outTempBatteryStatus': '0', 'pressure': '26.730544685', 'ptr': '38224', 
>>>>> 'radiation': 'None', 'rain': 'None', 'rainRate': '0.0', 'rainTotal': 
>>>>> '104.33999999999999', 'rxCheckPercent': '100', 'status': '0', 'usUnits': 
>>>>> '1', 'UV': 'None', 'windchill': '20.989026611354667', 'windDir': '202.5', 
>>>>> 'windGust': '19.68508829706588', 'windGustDir': 'None', 'windrun': 
>>>>> 'None', 
>>>>> 'windSpeed': '17.448146445126575'
>>>>> LOOP:   2022-02-12 19:20:06 CET (1644690006) 'altimeter': 
>>>>> '29.441470085033213', 'appTemp': '22.918881727966976', 'barometer': 
>>>>> '29.558469574570985', 'cloudbase': '3548.394255363211', 'dateTime': 
>>>>> '1644690006', 'delay': '3', 'dewpoint': '28.187829067769762', 'ET': 
>>>>> 'None', 
>>>>> 'heatindex': '32.18', 'humidex': '32.18', 'inDewpoint': 
>>>>> '20.586469406020147', 'inHumidity': '41.0', 'inTemp': 
>>>>> '42.620000000000005', 
>>>>> 'maxSolarRad': '0.0', 'outHumidity': '85.0', 'outTemp': '32.18', 
>>>>> 'outTempBatteryStatus': '0', 'pressure': '26.72759168625', 'ptr': 
>>>>> '38224', 
>>>>> 'radiation': 'None', 'rain': '0.0', 'rainRate': '0.0', 'rainTotal': 
>>>>> '104.33999999999999', 'rxCheckPercent': '100', 'status': '0', 'usUnits': 
>>>>> '1', 'UV': 'None', 'windchill': '24.387120697115183', 'windDir': '180.0', 
>>>>> 'windGust': '11.408403444890455', 'windGustDir': 'None', 'windrun': 
>>>>> 'None', 
>>>>> 'windSpeed': '9.171461592951148'
>>>>>
>>>>> On Saturday, February 12, 2022 at 5:25:08 PM UTC+1 tke...@gmail.com 
>>>>> wrote:
>>>>>
>>>>>> Could you do the same again, except this time show the LOOP data as 
>>>>>> well? 
>>>>>>
>>>>>> I'm not exactly sure what's happening, but my operating theory is 
>>>>>> that windGust and windDir never appear in the same LOOP packet. When the 
>>>>>> software sees windGust, but no windGustDir, it looks to substitute 
>>>>>> windDir, 
>>>>>> but it's not available. We can tell if this theory is correct by looking 
>>>>>> at 
>>>>>> the LOOP packets.
>>>>>>
>>>>>> On Sat, Feb 12, 2022 at 6:05 AM Tom Keffer <tke...@gmail.com> wrote:
>>>>>>
>>>>>>> Sorry, yes, that's what I meant. If windGustDir is missing, it 
>>>>>>> should substitute windDir in its place.
>>>>>>>
>>>>>>> Let me think about this for a bit.
>>>>>>>
>>>>>>> On Sat, Feb 12, 2022 at 5:59 AM Aslak Vaa <asla...@gmail.com> wrote:
>>>>>>>
>>>>>>>> Here is the result from running  weewxd  from the command line:
>>>>>>>>
>>>>>>>> REC:    2022-02-12 14:45:49 CET (1644673549) 'altimeter': 
>>>>>>>> '29.559632125170864', 'appTemp': '21.798150800000002', 'barometer': 
>>>>>>>> '29.68039690383254', 'cloudbase': '3612.989261474405', 'dateTime': 
>>>>>>>> '1644673549', 'delay': '10', 'dewpoint': '27.72361104088051', 'ET': 
>>>>>>>> 'None', 
>>>>>>>> 'heatindex': '32.0', 'humidex': '32.0', 'inDewpoint': 
>>>>>>>> '20.331537695862405', 
>>>>>>>> 'inHumidity': '40.0', 'inTemp': '42.980000000000004', 'interval': 
>>>>>>>> '10', 
>>>>>>>> 'maxSolarRad': '123.63840457180561', 'outHumidity': '84.0', 'outTemp': 
>>>>>>>> '32.0', 'outTempBatteryStatus': '0', 'pressure': '26.836852640000004', 
>>>>>>>> 'ptr': '37776', 'radiation': 'None', 'rain': 'None', 'rainRate': 
>>>>>>>> '0.0', 
>>>>>>>> 'rainTotal': '104.33999999999999', 'rxCheckPercent': '100', 'status': 
>>>>>>>> '0', 
>>>>>>>> 'usUnits': '1', 'UV': 'None', 'windchill': '23.361958924222293', 
>>>>>>>> 'windDir': 
>>>>>>>> '225.0', 'windGust': '12.079486000472244', 'windGustDir': 'None', 
>>>>>>>> 'windrun': '1.7895534815514438', 'windSpeed': '10.737320889308663'
>>>>>>>>
>>>>>>>> Until version 4.6.0 the windGustDir was recorded in the database 
>>>>>>>> with a value different from NULL. It seems for me that something is 
>>>>>>>> changed.
>>>>>>>> Do you mean that  windGustDir should have the value of windDir 
>>>>>>>> (windGust is a speed, not a direction)?
>>>>>>>>
>>>>>>>> On Saturday, February 12, 2022 at 2:41:29 PM UTC+1 tke...@gmail.com 
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> FO stations do not supply windGustDir, so the software should 
>>>>>>>>> substitute windGust in its place.
>>>>>>>>>
>>>>>>>>> Could you please run weewxd directly from the command line 
>>>>>>>>> <http://www.weewx.com/docs/usersguide.htm#Running_directly>? 
>>>>>>>>> Watch what it prints out for records (marked with "REC:"). What does 
>>>>>>>>> it 
>>>>>>>>> show for windGust and windGustDir?
>>>>>>>>>
>>>>>>>>> -tk
>>>>>>>>>
>>>>>>>>> On Sat, Feb 12, 2022 at 4:19 AM Aslak Vaa <asla...@gmail.com> 
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> After upgrating to weewx version 4.6.0/4.6.2 is windGustDir is 
>>>>>>>>>> always set to NULL in database (sqlite3).
>>>>>>>>>> Please see results of query from the database and extracts from 
>>>>>>>>>> the syslog file.
>>>>>>>>>> I stopped the version 4.5.1 at feb 5 15:02:05, and I started the 
>>>>>>>>>> version 4.6.0 same date half an hour later at 15:32:19. The windDir 
>>>>>>>>>> is 
>>>>>>>>>> saved as expected, only windGustDir is missing.
>>>>>>>>>> My weatherstation is model WH1080 , and I am using 
>>>>>>>>>> the FineOffsetUSB driver.
>>>>>>>>>> Contents of database:
>>>>>>>>>> sqlite3 /var/lib/weewx/weewx.sdb
>>>>>>>>>> SQLite version 3.34.1 2021-01-20 14:10:07
>>>>>>>>>> Enter ".help" for usage hints.
>>>>>>>>>> sqlite> select  dateTime(archive.dateTime, 'unixepoch', 
>>>>>>>>>> 'localtime') dateTime,
>>>>>>>>>>    ...>    archive.windSpeed, archive.windDir, archive.windGust, 
>>>>>>>>>> archive.windGustDir
>>>>>>>>>>    ...> from archive
>>>>>>>>>>    ...> where archive.datetime >
>>>>>>>>>>    ...>   (select max(archive.dateTime) from archive where 
>>>>>>>>>> windGustDir is not null) - 1000
>>>>>>>>>>    ...> limit 10;
>>>>>>>>>> 2022-02-05 
>>>>>>>>>> 14:50:00|17.1634447548798|234.745604391204|29.7513266307928|247.5
>>>>>>>>>> 2022-02-05 
>>>>>>>>>> 15:00:00|17.6108331252676|221.995376457057|27.2906905936595|247.5
>>>>>>>>>> 2022-02-05 15:14:51|24.3826661861384|202.5|32.6593510383139|
>>>>>>>>>> 2022-02-05 15:24:51|21.2509475934234|247.5|22.8168068897809|
>>>>>>>>>> 2022-02-05 15:34:51|22.8168068897809|180.0|27.2906905936595|
>>>>>>>>>> 2022-02-05 15:40:00|24.3826661861384|225.0|28.1854673344352|
>>>>>>>>>> 2022-02-05 
>>>>>>>>>> 15:50:00|19.2987074317309|222.892960584793|34.8962928902532|
>>>>>>>>>> 2022-02-05 
>>>>>>>>>> 16:00:00|19.6444166270306|220.208490631264|34.2252103346714|
>>>>>>>>>> 2022-02-05 
>>>>>>>>>> 16:10:00|17.3871389400737|226.684593888771|23.4878894453627|
>>>>>>>>>> 2022-02-05 
>>>>>>>>>> 16:20:00|13.7673603069355|222.317738592905|25.0537487417202|
>>>>>>>>>> sqlite>
>>>>>>>>>> Extracts from syslog:
>>>>>>>>>> aslak-pi0:~ $ grep '4\.5\.' /var/log/syslog.1 | tail
>>>>>>>>>> Jan 30 09:51:04 aslak-pi0 weewx[952] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Jan 30 19:29:02 aslak-pi0 weewx[976] INFO __main__: Initializing 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Jan 30 19:29:02 aslak-pi0 weewx[979] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Jan 31 19:28:05 aslak-pi0 weewx[965] INFO __main__: Initializing 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Jan 31 19:28:05 aslak-pi0 weewx[968] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Feb  1 20:32:31 aslak-pi0 weewx[1032] INFO __main__: Initializing 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Feb  1 20:32:31 aslak-pi0 weewx[1037] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Feb  2 15:44:42 aslak-pi0 weewx[15495] INFO __main__: 
>>>>>>>>>> Initializing weewx version 4.5.1
>>>>>>>>>> Feb  2 15:44:43 aslak-pi0 weewx[15498] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> Feb  5 15:02:05 aslak-pi0 weewx[15498] INFO __main__: Terminating 
>>>>>>>>>> weewx version 4.5.1
>>>>>>>>>> aslak-pi0:~ $ grep '4\.6\.0' /var/log/syslog.1 | head
>>>>>>>>>> Feb  5 15:32:19 aslak-pi0 weewx[37838] INFO __main__: 
>>>>>>>>>> Initializing weewx version 4.6.0
>>>>>>>>>> Feb  5 15:32:19 aslak-pi0 weewx[37841] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.6.0
>>>>>>>>>> Feb  5 15:33:45 aslak-pi0 weewx[37841] INFO __main__: Terminating 
>>>>>>>>>> weewx version 4.6.0
>>>>>>>>>> Feb  5 15:35:28 aslak-pi0 weewx[37964] INFO __main__: 
>>>>>>>>>> Initializing weewx version 4.6.0
>>>>>>>>>> Feb  5 15:35:28 aslak-pi0 weewx[37967] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.6.0
>>>>>>>>>> Feb  5 16:46:50 aslak-pi0 weewx[37967] INFO __main__: Terminating 
>>>>>>>>>> weewx version 4.6.0
>>>>>>>>>> Feb  5 16:46:54 aslak-pi0 weewx[38640] INFO __main__: 
>>>>>>>>>> Initializing weewx version 4.6.0
>>>>>>>>>> Feb  5 16:46:54 aslak-pi0 weewx[38643] INFO __main__: Starting up 
>>>>>>>>>> weewx version 4.6.0
>>>>>>>>>> Feb  5 16:57:25 aslak-pi0 weewx[38643] INFO __main__: Terminating 
>>>>>>>>>> weewx version 4.6.0
>>>>>>>>>> Feb  5 16:57:29 aslak-pi0 weewx[38793] INFO __main__: 
>>>>>>>>>> Initializing weewx version 4.6.0
>>>>>>>>>> aslak-pi0:~ $
>>>>>>>>>>
>>>>>>>>>> -- 
>>>>>>>>>> You received this message because you are subscribed to the 
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, 
>>>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>> To view this discussion on the web visit 
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/1acfbc59-01a5-44a9-b1a8-bd000823204fn%40googlegroups.com
>>>>>>>>>>  
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/1acfbc59-01a5-44a9-b1a8-bd000823204fn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>> -- 
>>>>>>>> You received this message because you are subscribed to the Google 
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it, 
>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>> To view this discussion on the web visit 
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/7e95cedd-6db0-4bd2-9209-babeee3218e1n%40googlegroups.com
>>>>>>>>  
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/7e95cedd-6db0-4bd2-9209-babeee3218e1n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>> -- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "weewx-user" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to weewx-user+...@googlegroups.com.
>>>>
>>> To view this discussion on the web visit 
>>>> https://groups.google.com/d/msgid/weewx-user/70d09feb-27f0-40ce-909b-5d62c5757f6cn%40googlegroups.com
>>>>  
>>>> <https://groups.google.com/d/msgid/weewx-user/70d09feb-27f0-40ce-909b-5d62c5757f6cn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ff99479d-f2a1-49cb-8c7e-ed37b119472bn%40googlegroups.com.

Reply via email to